This paper presents the elastic plastic analysis results of mono strand anchor head by the finite element method.
本文采用有限元方法给出了单孔锚具的弹塑性分析结果，分析了摩擦系数对锚具性能的影响。
The method was not only suitable for ideal elastic plastic materials, but suitable for the normal materials with hardness trend.
该方法不仅适用于理想弹塑性材料，而且适用于常规的具有硬化趋势的材料。
Based on the mechanism analysis, the elastic plastic model of space formation caused by blasting with linear charges is established.
通过对条形装药爆破成腔机理的分析，建立了爆炸挤压成腔弹塑性简化模型。
With the dynamic explicit elastic plastic finite element method, the unsteady deformation of the bite stage in slab rolling was simulated.
采用显式动力学弹塑性有限元方法，对平板轧制过程中咬入阶段的非稳定变形进行了数值模拟。
France PRONAL was founded in 1961, is a professional manufacturer of rubber materials and high elastic plastic composite materials company.
法国PRONAL创立于1961年，是一家专业生产橡胶材料和高弹塑料合成材料的公司。
In this paper, a relative criterion method is presented for analysing the elastic plastic stable crack propagation under biaxial loading conditions.
本文提出了一个用相对准则分析双向载荷下弹塑性裂纹稳定扩展的方法。
The elastic plastic buckling analysis is completed on bucking load and buckling mode of thin wall cylindrical shells fully filled with liquid under axial compression.
对充满液体的薄壁圆柱壳经受轴向压缩时的屈曲载荷和屈曲模态进行了弹塑性屈曲分析。
A series solution for the attenuation of an elastic-plastic shock wave and expressions for the general terms of the series are given in this paper.
本文提出了一个求解弹塑性激波衰减规律的级数解法，给出了各未知量级数展式的通项表达式。
In this paper, the thermal elastic-plastic stresses of the components which underwent local high temperature cycle were analyzed by FEM.
本文对局部经受高温热循环构件的热弹塑性应力进行了有限元分析。
The equation of lateral disturbance used to analyize the problem is developed by taking into account the effect of elastic-plastic stress wave.
考虑了弹塑性应力波传播对屈曲的影响，建立了该问题横向扰动方程。
In this research work, the thermal elastic-plastic method is used to analyze the dynamic thermal stress in the stress-frame specimen during its solidification and cooling process.
本研究用热弹塑性方法分析铸造应力框自凝固到冷却过程动态热应力。
The paper has studied straightening stress and residual deformation of circular shaft by using elastic - plastic theory, deueloped calculation formula of straightening loud in given deflection error.
从弹塑性理论出发以圆截面轴为例对校正应力与残余变形进行了分析研究，提出了在给定弯曲误差下的校正载荷的计算公式。
Thermal-elastic-plastic and inherent strains FE methods are two means, which have been applied to the prediction of welding deformation.
热弹塑性有限元法和固有应变法是焊接变形预测的两种主要数值方法。
The crack tip stress-strain field of elastic-plastic materials are analysed by finite element method in the plane stress condition.
用有限元方法对平面应力条件下弹塑性材料的裂纹尖端应力应变场进行了计算。
Metal plastic deforming process is a kind of quite complex and large elastic-plastic deformation process.
金属塑性加工的变形过程是一个非常复杂的弹塑性大变形过程。
The finite deformation elastic-plastic finite element formula are given. Based on the ANSYS software, the application of elastic-plastic FEM on metal plastic process field is outlined.
给出了有限变形弹塑性有限元列式，基于A NSYS软件平台，介绍了弹塑性有限元法在金属塑性加工领域中的应用。
In the fracture assessment of 3c, J-integer is a very important parameter, which is also an important contents in the elastic-plastic fracture mechanics.
在3c级断裂评估中，J积分是一个非常重要的参量，也是研究弹塑性断裂力学的重要内容之一。
Both shot peening and contact rolling belong to the cyclic elastic-plastic deformation process under the action of Hertz stress.
喷丸过程和随后的接触疲劳滚压过程同属在赫兹应力作用下的循环弹塑性应变过程。
This paper discusses the various kinds of elastic-plastic response spectra and points out the key problem which must be solved for their use in seismic design.
本文对各种形式的弹塑性反应谱的研究进行了综合讨论，并指出要使弹塑性反应谱能用于抗震设计应解决的关键问题。
The experimental and research results indicate that non-elasticity strain associate with time in nature according to constitutive equations of the classical elastic-plastic and creep theory.
实验和研究表明：基于经典弹塑性及蠕变理论的本构方程，非弹性应变在高温下其本质上是时间相关的。
Furthermore, the failure assessment curve method is a feasible method for notch elastic-plastic fracture assessment.
进一步说明失效评定图方法也是缺口弹塑性断裂评定的极好方法。
The target displacement of a structure can be predicted by capacity spectrum method, where the demand curves are often constructed by elastic-plastic response spectra.
能力谱法可以用来估计结构的目标位移，在该方法中弹塑性反应谱常用于需求曲线的建立。
Establish finite element model, and use elastic - plastic mechanics to discuss stress-stain state of elastic and plastic deformation in cutting zone.
根据正交切削特点建立了有限元模型，应用弹塑性力学讨论了切削变形区的弹、塑性阶段的应力、应变状态。
The structural analytical method of elastic-plastic earthquake responses can be separated into macroscopic method and microscopic method.
对于钢筋混凝土结构的弹塑性地震反应分析方法可以分为微观方法和宏观方法。
Based on the characteristics of postgraduate elastic-plastic mechanics and the teaching practice and experience, this paper discusses the teaching methods of elastic-plastic mechanics course.
本文基于研究生弹塑性力学课程的特点和教学体会，对弹塑性力学课程的教学方法进行了探讨。
Regular Bridges' ductile earthquake-resistance design and checking calculation could be made by simplified analytic means of elastic-plastic earthquake response.
对于规则桥梁，可用简化的弹塑性地震反应分析方法进行延性抗震的设计和验算。
These results are necessary for solving the problem of elastic-plastic wave propagation in a bar.
这些结果对于解决杆中弹塑性波传播问题是必需的。
Then, the initial stress field of the slope is simulated by means of elastic-plastic finite element.
采用弹塑性有限元法对斜坡的初始应力场特征进行模拟研究。
The results indicate that, the elastic-plastic mismatch of components has significant influence on the near-tip "driving force" of fatigue crack growth.
结果表明，界面两侧材料的弹塑性失配对复合板面裂纹的扩展驱动力具有重要影响。
By introducing the viscoelastic deformation into the unified constitutive model a Visco-elastic-plastic unified constitutive model is created.
将粘弹性变形引入到统一本构模型中，进而建立了粘弹塑性统一本构模型。
应用推荐