These results are necessary for solving the problem of elastic-plastic wave propagation in a bar.
这些结果对于解决杆中弹塑性波传播问题是必需的。
By elastic-plastic analyzing of metallic cylinder, a formulas of pressure resistance was derived.
通过对金属筒体的弹塑性分析，推导出圆筒形壳体的耐压公式。
It is feasible and effective to use fea for the elastic-plastic time-history analysis of structure.
利用大型有限元程序进行结构弹塑性时程反应分析，是可行有效的。
The results are more conformable to the situs observations than those of the elastic-plastic model.
算例表明这一方法更为符合实际基坑工程的观测结果。
Then, the initial stress field of the slope is simulated by means of elastic-plastic finite element.
采用弹塑性有限元法对斜坡的初始应力场特征进行模拟研究。
Metal plastic deforming process is a kind of quite complex and large elastic-plastic deformation process.
金属塑性加工的变形过程是一个非常复杂的弹塑性大变形过程。
The traveling process of elastic-plastic waves under impact action was analyzed by characteristics method.
用特征线法分析了刚性块轴向撞击弹塑性直杆时应力波传播的过程。
Design by Rule, Design by Analysis, Elastic Stress Analysis, Limit Load Analysis, Elastic-Plastic Stress Analysis.
按规则设计，按分析设计，弹性应力分析，极限载荷分析，弹-塑性应力分析。
Furthermore, the failure assessment curve method is a feasible method for notch elastic-plastic fracture assessment.
进一步说明失效评定图方法也是缺口弹塑性断裂评定的极好方法。
The spinning process of splitting V type belt wheel involves movement of multi-body and couple of elastic-plastic deformation.
型劈开式皮带轮的旋压剖分成形过程涉及多体运动以及弹、塑性多变形模式的耦合。
Both shot peening and contact rolling belong to the cyclic elastic-plastic deformation process under the action of Hertz stress.
喷丸过程和随后的接触疲劳滚压过程同属在赫兹应力作用下的循环弹塑性应变过程。
The crack tip stress-strain field of elastic-plastic materials are analysed by finite element method in the plane stress condition.
用有限元方法对平面应力条件下弹塑性材料的裂纹尖端应力应变场进行了计算。
The respective linear and nonlinear model parameters are determined according to these isochrones' elastic-plastic deformation segment.
分别根据该曲线的弹、塑性变形段确定相应的线性、非线性模型参数。
In this paper, the thermal elastic-plastic stresses of the components which underwent local high temperature cycle were analyzed by FEM.
本文对局部经受高温热循环构件的热弹塑性应力进行了有限元分析。
Thermal-elastic-plastic and inherent strains FE methods are two means, which have been applied to the prediction of welding deformation.
热弹塑性有限元法和固有应变法是焊接变形预测的两种主要数值方法。
The structural analytical method of elastic-plastic earthquake responses can be separated into macroscopic method and microscopic method.
对于钢筋混凝土结构的弹塑性地震反应分析方法可以分为微观方法和宏观方法。
Based on the elastic-plastic dynamic model of the thin-wall structure aqueduct, the non-linear earthquake response analysis is presented.
运用渡槽薄壁结构弹塑性动力分析模型，开展了渡槽非线性地震响应分析计算。
By introducing the viscoelastic deformation into the unified constitutive model a Visco-elastic-plastic unified constitutive model is created.
将粘弹性变形引入到统一本构模型中，进而建立了粘弹塑性统一本构模型。
The equation of lateral disturbance used to analyize the problem is developed by taking into account the effect of elastic-plastic stress wave.
考虑了弹塑性应力波传播对屈曲的影响，建立了该问题横向扰动方程。
Complex Bridges' ductile earthquake-resistance design and checking calculation could be made by the means of elastic-plastic temporal analysis.
对于复杂桥梁应用弹塑性时程分析的方法进行延性抗震的设计和验算。
A series solution for the attenuation of an elastic-plastic shock wave and expressions for the general terms of the series are given in this paper.
本文提出了一个求解弹塑性激波衰减规律的级数解法，给出了各未知量级数展式的通项表达式。
The elastic-plastic stress and displacement fields of cylindrically orthotropic composite thick-walled tube under uniform radial pressure are studied.
研究了在均匀径向压力作用下圆柱正交异性复合厚壁圆筒的弹-塑性应力场和位移场。
The results indicate that, the elastic-plastic mismatch of components has significant influence on the near-tip "driving force" of fatigue crack growth.
结果表明，界面两侧材料的弹塑性失配对复合板面裂纹的扩展驱动力具有重要影响。
In the fracture assessment of 3c, J-integer is a very important parameter, which is also an important contents in the elastic-plastic fracture mechanics.
在3c级断裂评估中，J积分是一个非常重要的参量，也是研究弹塑性断裂力学的重要内容之一。
Based on the elastic-plastic FE theory, the Punching Bonding process of the automobile sheets is simulated by using ANSYS analysis software in this paper.
采用有限元分析软件ANSYS，基于弹塑性有限元理论建立有限元模型，对汽车板件冲压连接过程进行了模拟。
This paper discusses the various kinds of elastic-plastic response spectra and points out the key problem which must be solved for their use in seismic design.
本文对各种形式的弹塑性反应谱的研究进行了综合讨论，并指出要使弹塑性反应谱能用于抗震设计应解决的关键问题。
Regular Bridges' ductile earthquake-resistance design and checking calculation could be made by simplified analytic means of elastic-plastic earthquake response.
对于规则桥梁，可用简化的弹塑性地震反应分析方法进行延性抗震的设计和验算。
At the same time, precise structure elastic-plastic analysis method created advantage for the performance-based design method, an advanced aseismatic design method.
同时，精确的结陶弹塑性分析方法也为先进的抗震设计方法——性能抗震设计法创造了有利条件。
The target displacement of a structure can be predicted by capacity spectrum method, where the demand curves are often constructed by elastic-plastic response spectra.
能力谱法可以用来估计结构的目标位移，在该方法中弹塑性反应谱常用于需求曲线的建立。
The finite strip method in structural analysis has been extended, and elastic-plastic large deformation spline finite strip method based on the Updated-Lagrange method (U.
拓展了结构分析有限条法，基于固体力学有限形变理论的更新拉格朗日法（U 。
应用推荐