To save energy raising heat efficiency of furnace is an important measure.
为了节约能源，提高加热炉的热效率是一项重要的措施。
Flue gas can also beset up waste heat recovery system to increase the thermal efficiency of furnace.
也可以设置烟气余热回收系统来提高加热炉的热效率。
Its design concept is to recuperate flue gas and increase heat efficiency of furnace at a maximum extent.
其设计指导思想是，最大程度地回收炉子的烟气余热，提高炉子热效率。
After the air preheater system of hydrogenated reaction furnace changes into heat tube preheater, the heat efficiency of furnace increases about 3%.
加氢反应炉空气预热系统改用热管预热器后，炉子热效率提高了约3%。
The circular utilization of the flue gas can lower the air pollution caused by the waste gas exhaust and raise the heat efficiency of furnace and kiln.
又由于烟道废气大部份处于循环利用状态，从而降低了废气排放导致的空气污染，同时避免了废气排放导致的热能损失，可有效提高炉窑的热效率。
The efficiency of the furnace more than doubled.
锅炉的效率提高了一倍多。
A computer programme example on heat efficiency calculations of a glass tank furnace has been described.
介绍了一个玻璃池炉热效率计算程序的实例。
The gist of the present furnace design with high thermal efficiency and fuel utilization.
本设计的要点是加热炉高的热效率，提高燃油的利用率。
It was proved that the grid inner cover could improve the heat transfer efficiency and throughput of the bell-type annealing furnace.
指出了网格形结构对于提高内罩的换热效率，增加罩式炉的生产能力是有利的。
The reasons of low furnace heat efficiency for reforming unit are analyzed. Some measures adopted for raising furnace heat efficiency are recommended.
分析了重整装置加热炉热效率低的原因，介绍了提高加热炉热效率采取的几项措施。
The efficiency of renewal of furnace tube is increased.
提高了更换炉管的效率。
The fluidized bed is better than the grate furnace as a combustor since its diversity of fuel kinds, high efficiency of combustion and lower temperature of operation.
流化床燃烧方式和炉排炉燃烧相比具有燃料适应性广、燃烧效率高、运行温度低等优点。
Technical measures for increasing heat efficiency and processing capacity of cracking furnace were introduced.
介绍了提高裂解炉热效率和加工能力所采取的技术措施。
The transporting system is significant to ensure the formal operation of the pusher furnace, heating quality and improvements on products efficiency.
其运输系统对保证加热炉的正常运行，保证加热质量以及提高生产效率都有极其重要的意义。
This paper presents a combustion evaluation function based on flame color image classification after analysing the influential factors on the burning efficiency of industrial oil furnace.
本文在分析了影响工业燃油炉燃烧效率因素的基础上，提出了一种基于火焰彩色图像像素分类的表征燃烧状况的指标评价函数。
After making use of these new tech-nics, the automation level, thermal efficiency and heat treatment level of furnace are raised.
采用这些技术后，提高了炉子的自动化程度、炉子热效率和热处理水平。
Due to its advantages, such as high thermal efficiency and smelting intensity, the short rotary furnace can be used as smelting devices for reduction matting smelting of jamesonite concentrate.
短回转窑具有可用热效率高，熔炼强度大的优点，可作为脆硫铅锑矿精矿还原造锍熔炼的熔炼设备。
The intensification and optimization of the copper smelting process in flash furnace are investigated by using of the "high efficiency reaction core" model.
运用闪速炉反应塔“高效反应区”模型，研究闪速炉操作的优化与强化。
For the control of heating furnace thermal efficiency, the key problem is to find the online reliable and effective estimation of thermal efficiency.
对于加热炉热效率的控制，其关键问题在于寻找到一种有效可靠的热效率在线软测量方法。
Thermal efficiency were improved by the refit of heating furnace, and it is important for energy saving of enterprises.
通过提出对加热炉的改造，提高了加热炉的热效率，对企业的节能降耗具有实际意义。
The new heat pipe type heating furnace with high efficiency based on heat pipe principle is consisted of the combustion chamber, evaporator and heat exchanger.
基于热管原理将燃烧室、蒸发器和换热器集于一体，构成了新型高效热管式加热炉。
On the whole, heat efficiency of anode furnace is on the low level, and the prospect of utilization of waste heat is extensive.
从总体来看，铜精炼阳极转炉的热效率偏低，余热利用的前景和空间是非常大的。
The results prove that the movable heat insulate layer has obvious effects on improving the temperature profile in furnace and combustion efficiency of coal fired boiler at low load.
试验表明：可调卫燃带对改善锅炉低负荷时炉内温度分布及提高燃烧效率具有十分明显的效果。
The excessive air coefficient, flue gas emission temperature and fuel consumption are three major factors affecting the heat efficiency of the furnace.
过剩空气系数、排烟温度、燃料用量是影响加热炉热效率的三个主要因素。
Recycle and utilization of waste heat in exhaust fume of industrial furnaces is the efficient way enhancing furnace heat efficiency and saving fuel used by furnace.
工业炉窑烟气余热回收利用，是提高炉子热效率、节约炉用燃料的极为有效的途径。
After this technique was adopted by stainless steel cold rolling project of company, the full automation is realized and the efficiency is improved in production of bell furnace.
公司不锈钢冷轧项目采用这一技术后，实现了罩式炉生产的完全自动化，提高了生产的效率。
These new technologies lay solid foundation for realizing the target of high efficiency, high quality, low consumption, long campaign and environmental protection of blast furnace.
采用了这些新技术，为实现高炉高效、优质、低耗、长寿和环保的新目标打下了坚实的基础。
By regulating the amount of coal and rationally organizing the internal furnace combustion, the total efficiency of the boiler has been remarkable enhanced.
控制系统通过调节供入的燃料量和合理组织炉内燃烧，提高了锅炉的运行效率。
By regulating the amount of coal and rationally organizing the internal furnace combustion, the total efficiency of the boiler has been remarkable enhanced.
控制系统通过调节供入的燃料量和合理组织炉内燃烧，提高了锅炉的运行效率。
应用推荐