The results show that the upper level part of the double cold front may be merged in the movement under the effect of deformation factor.
结果显示，在变形场作用下，双冷锋在移行过程中会发生上层锋合并的现象。
Due to the existence of the strain and deformation texture, the effect of deformation on corrosion property of the TNTZO alloy is not monotonic.
由于应变和织构的存在，塑性变形对TNTZO合金腐蚀性能的影响比较复杂。
The effect of deformation mode and degree on the structure and properties of large conical ring forgings was analyzed. An optimal forging process was drawn up.
分析了变形方式和变形程度对大型锥环形锻件组织和性能的影响并制定较佳锻造工艺。
The effect of deformation temperature and deformation speed on the limit drawing ratio (LDR) and microstructure of the roll-casting AZ31 magnesium alloy sheet.
研究了变形温度、变形速度对铸轧az31镁合金板的极限拉深比(ldr)和组织的影响。
During the isothermal constant strain rate compression process, the effect of deformation heating on flow stress increases with increasing equivalent strain rate.
在等温恒应变速率压缩过程中，随着等效应变速率的增大，变形热效应对流动应力的影响程度增大。
The approach takes into account not only the effect of direction of seismic wave propagation but also the effect of deformation of the foundation rock through which the waves pass.
该法不仅考虑到地震波传播方向，而且还考虑到坝基基岩变形对堤坝动力反应的影响。
The effect of deformation temperature on microstructure and property of MP159superalloy has been analysed and a reasonable range of deformation temperatures for MP159 alloy has been obtained.
分析了变形温度对MP159 高温合金组织、性能的影响规律，得出了该合金合理的变形温度范围。
The size of a quantity, namely the quantity of the botanical garden stone, lest affect splicing, after mosaics pattern, decorative pattern, line or cause deformation, affect adornment effect.
一量，即量园林石材的尺寸规格，以免影响拼接，或造成拼接后的图案、花纹、线条变形，影响装饰效果。
In the analysis of the stress and deformation under dynamic loading, the inertia force and damping moment should be considered in addition to the transverse shear effect.
在分析动载荷下的应力和变形时，除考虑横向剪切效应外，还须考虑微段的惯性力和阻尼力矩。
According to the test results, a rheological model that can reflect damage effect of loess is built in the paper, the model can analog accelerate deformation character well.
本文依据试验结果建立的考虑黄土损伤效应的流变模型能够很好的描述黄土加速蠕变阶段的变形特点。
The effect of these states on deformation magnitude, duration, and energy loss parameters was assessed.
评估在变形程度、持续时间和能量损耗参数这些情形上的影响。
By examples, the effect of relative parameters on the radial deformation is analyzed.
运用算例分析了有关参数对泵筒径向变形的影响。
The effect of transverse shear deformation is considered and Angle of rotation of surface normal for each layer is different.
这类板的横向剪切变形效应必须予以考虑，因而层板不同层的表面法线的转角是不同的。
Based on analyzing the eruption and tiny aggregate effect of fly ash, the influence of fly ash on the shrinkage fissure of concrete is studied, caused by the plastic deformation, dry or temperature.
以粉煤灰的火山灰效应、微集料效应分析为基础，分析研究了粉煤灰对混凝土塑性收缩、干缩、自缩和温度收缩裂缝的影响。
This model takes the effect of the steering gear and rack's deformation and the dynamic characteristic of hydraulic system into account on the basis of common steering system.
该模型在普通转向器模型的基础上考虑了转向齿轮、齿条等构件的变形和液压特性对系统动力学特性的影响。
The effect of plasticity deformation on residual thermal stress was investigated.
研究了塑性变形对残余热应力的影响；
A process for fabricating CuCrZr alloy spot-welding electrode by three cold extrusions is developed, with effect of cold deformation on alloy properties explored.
研究了用铜铬锆电极合金经三道工序冷挤压成点焊电极的工艺，还探讨了挤压冷变形对合金性能的影响。
At the matching stage, using several reference points and in combination with similar element analysis alleviate the effect of nonlinearly deformation and decrease the false reject rate.
在匹配阶段，多参考中心的使用和相似元分析的结合能在一定程度上克服指纹非线性形变的影响，降低了匹配算法的拒识率。
The effect on shrinkage deformation of fibre winding composites were considered by discussing the winding tensile resin thermo-shrinkage stress and the mandrels.
本文从纤维缠绕张力、树脂收缩、热应力、芯模等方面探讨了对纤维缠绕复合材料制品收缩变形的影响。
Based on the research results as above, the deformation effect of dynamic consolidation foundation and dynamic consolidation tests are studied deeply and some valuable conclusion are obtained.
在此基础上，对强夯试验和强夯地基的变形效应进行了较为深入研究，得出了一些有益的结论。
The mass effect of intracranial lesions may lead to deformation or displacement of the near functional areas.
由于病变占位效应的影响，病变周围的功能活动区常发生变形或移位。
A static reference measurement is taken to avoid the effect of big skin deformation around joints to the measured data of joint markers.
并提出静态参考测量的措施，避免关节周围较大的皮肤变形对测量数据的影响。
Finally, some examples are given to show the effect of shearing deformation, the hole size, the position of linear load and the geometrical parameter on the critical load.
最后，本文以实例分析讨论了横向剪切变形、开孔大小、线布载荷位置和几何参数对临界载荷的影响。
The effect of shear deformation and rotary inertia are considered in the paper.
文中考虑了剪切变形和转动惯量的影响。
Due to the effect of strain hardening, higher amount of cold deformation resulted in superior room temperature strength and inferior torsion ductility.
由于加工硬化效应的影响，随着冷拔变形量的增加，合金丝材的室温强度增加，扭转塑性下降。
From numerical example, the effect of shear deformation and rotatory inertia on the natural frequencies of the Timoshenko clamped beam is discussed under different slender conditions.
通过算例，计算了在不同长细比条件下，剪切变形和转动惯量对固端梁的各阶主频率的影响。
The deformation and stability of soft rock slope under excavation and rainfall, as well as the effect of the supporting system on slope deformation are analyzed by physical modeling.
通过地质力学模型试验，研究软岩高边坡在开挖及降雨时坡体的稳定性及变形变化规律，分析支挡结构对边坡变形的影响机理。
The effect of in-plane bending deformation on the lateral_torsional buckling of beam_columns is considered and the effect form, the additional moment factor, is obtained.
得出了平面内弯曲变形对压弯构件弯扭屈曲的影响形式，这一形式可用统一的弯矩附加系数表达。
The effect of in-plane bending deformation on the lateral_torsional buckling of beam_columns is considered and the effect form, the additional moment factor, is obtained.
得出了平面内弯曲变形对压弯构件弯扭屈曲的影响形式，这一形式可用统一的弯矩附加系数表达。
应用推荐