A dynamic mathematical model of specific energy and specific load is presented, based on specific edge load (SEL) theory.
建立了基于比边缘负荷理论的高浓打浆过程的比能量、比负荷动态数学模型以及成浆质量模型。
The refining mechanism of refiner is discussed by analyzing the specific refining energy, the specific edge load and the specific surface load.
通过分析有效磨浆功、有效缘角负荷、有效表面负荷，阐明了磨浆机的打浆机理。
The paper presents a mathematical model for the high consistency refining process of Fujian Qingzhou paper mill based on the specific edge load theory. The validity of the model has been confirmed.
根据比边缘负荷理论，建立了福建青州造纸厂高浓打浆过程的数学模型，并证实了模型的正确性。
You've also discovered how to display site navigation using a list look and feel that matches iPhone user expectations and that will load quickly even under slower Edge network conditions.
也懂得了如何使用列表外观显示站点导航，这种方式不仅符合iPhone用户的期望，也加快了加载速度(在网速比较慢的情况下也不例外)。
Caching the patch files at the edge of the network is a simple approach to reducing the load inside the infrastructure.
在网络的边缘缓存补丁文件，这是降低基础结构中的负载的简单方法。
Make light and speedy web apps that load fast on 3g and edge and are not too processor intensive.
让你的Web应用变得轻快，在3g和临界情况下加载都不是太耗处理器的资源。
The profiles are calculated in such a way that, under normal load conditions, life-reducing edge stresses do not occur at a tilting angle of up to 4' between inner ring and outer ring (Table 5.2).
通过这种方式计算的轮廓，在正常的载荷情况下，内外圈之间的偏斜角度超过4＇时不会发生缩减寿命的边缘应力（表5.2）。
The distributed load is regarded as polynomial function or uniformly distributed moment along the edge.
荷载采用了多项式型的分布荷载及均布边缘力矩。
Loads are regarded as axisymmetrical distributed load, uniform moments and uniform radial forces along the edge or their combination.
荷载为轴对称分布荷载、均布边缘力矩及径向力或它们的联合作用。
The first one employs the fracture parameter, being the distance from the point of applying the indentation load to the specimen edge.
第一个采用了断裂参数，是距离的应用压痕负荷的标本优势。
The plate is subjected to a uniformly distributed rectangular load pulse and Simply-supported along its edge.
圆板受均匀分布的矩形脉冲载荷作用。
The crack appears at the edge angle due to stress concentration caused by alternating load, which finally leads to the fissuring of die plate.
凹模在使用过程中，由于交变载荷的作用，使碳化物的棱角处应力集中出现裂纹，最终导致凹模开裂。
The maximum values of shear stress are found in edge of the loaded area on the surface of the upper layer under resultant load.
最大剪应力发生在综合荷载作用下，上层表面荷载边缘处。
Considering the initial geometric deflection, the theoretical ultimate load is obtained based on the yielding criterion of the cross-sectional edge stresses.
对于均布轴向荷载与集中荷载共同作用下的压杆，考虑初始几何位移的影响，根据边缘纤维屈服准则得到构件的理论最大荷载。
Using this method, the result of computation is quite agreeable to the result of experiment in situs in any load position, interior edge or corner load.
采用这种方法，对板中、板边和板角三种受荷位置的计算表明，计算结果都能与现场试验的结果较好地吻合。
Nonlinear bending of an annular sandwich plate under the action of a line load uniformly distributed along the inner edge is discussed.
讨论了在内边缘均布剪力作用下夹层环形板的非线必弯曲问题。
The limit load formulae of single-edge deeply notched plates with round ends subjected to pure bend moment and tensile load under plane stress condition have been derived.
推导了平面应力条件下单边圆形底部深缺口板条受纯弯曲和拉伸载荷作用的极限载荷公式。
Loads are regarded as axisymmetrical distributed load and uniform moments along the edge.
荷载为轴对称分布荷载及均布边缘力矩。
The dead load shear and impact shear testing were performed from both of root apex direction and cutting edge direction.
测试了剪切力分别沿根尖方向和切缘方向作用的静剪切和冲击剪切强度。
In numerical examples, distributed load is regarded as polynomial function, cosine function or uniform moments along the edge and their combination.
在计算例题中，荷载采用多项式形式、余弦函数形式的分布荷载以及均布边弯矩荷载或者由它们组合而成的荷载。
Effects of different edge joint design on load carrying capability of canopy transparent materials have been studied in this paper.
研究了不同边缘连接设计对座舱透明件承载能力的影响。
Under action of uniformly distributed load or uniformly distributed moment along edge, results are compared with that obtained by perturbation method, and it shows that the method used in…
均布荷载或均布边缘力矩作用下的计算结果同摄动法的计算结果作了比较，结果表明本文的方法具有大得多的收敛范围。
The finite volume method was used to compute the aerodynamic load, and the effect of leading-edge cut and ribs on the pressure distribution was analyzed simultaneously.
使用有限体积法计算了飞行时的气动载荷，分析了前缘切口和翼肋开孔对压强分布的影响；
Front load washer: the model and serial Numbers can be found on the inside edge of the door.
前开门式洗衣机：此款型号和系列编码能够在洗衣机门内部的边上找到。
In this paper, calculation of load performance of a 28v, 35a claw-pole alternator is presented using three dimensional finite element method with tetrahedral edge elements.
本文用四面体棱单元三维有限元方法计算一台28V,35a汽车用爪极发电机负载特性。
In this paper, calculation of load performance of a 28v, 35a claw-pole alternator is presented using three dimensional finite element method with tetrahedral edge elements.
本文用四面体棱单元三维有限元方法计算一台28V,35a汽车用爪极发电机负载特性。
应用推荐