Textures of different samples were determined by EBSD.
经ebsd测定了不同状态下钽的织构。
The grain orientation was determined by orientation mapping of EBSD technique.
并利用背散射电子衍射(EBSD)技术分析了晶粒取向变化。
The basic principle and experimental analysis method of EBSD technology was introduced.
介绍了EBSD技术的基本原理、试验分析方法。
Textures in deep punching niobium sheets have been examined by the EBSD technology in the present paper.
介绍了采用电子背散射衍射测定深冲用再结晶铌板织构的结果。
A new kind of method for studying critical materials-electron backscatter diffraction (EBSD) analysis technology was introduced.
介绍了一种新型的晶体材料研究方法——电子背散射衍射分析技术。
The effect of grain boundary structure on secondary working embrittlement (SWE) of IF steels was studied by electron back-scatter diffraction (EBSD) and TEM.
采用电子背散射衍射（EBSD）技术和 TEM技术对IF钢二次加工脆性与晶界结构之间的关系进行了研究。
The structure of dual phase and orientation of AISI304 casting thin strip produced by twin roll caster were analyzed by orientation mapping based on EBSD technique.
利用EBSD取向成像技术，分析了双辊连铸法生产的AI SI 304 奥氏体连铸薄带的两相组织结构及取向特点。
Two phase structures and textures of a 15%mn steel in hot forging state and a tensile-deformed 20%mn steel were analyzed by orientation mapping based on EBSD technique.
利用EBSD取向成像技术初步分析了含锰15%的热锻态高锰钢和含锰20%的拉伸样品中的两相组织结构及取向特点。
The influence of over-aging treatment of AA2195 on the distribution of second phase particles was investigated by SEM, TEM, and electron back scatter diffraction(EBSD).
采用扫描电子显微技术（SEM）、透射电子显微技术（TEM）、背反射电子衍射技术（EBSD）等分析手段对AA2195铝锂合金过时效对析出相粒子组态、细晶组织的影响进行了研究。
With the strain increasing compression fiber texture ( fiber texture) tends to sharper, predictions of texture development are well accord with the EBSD measured results.
随着真应变的增加，压缩丝织构（织构）趋于锋锐，模拟结果与EBSD试验测得的织构演化结果能较好地吻合。
The evolution rule of the rare earth aluminum capacitor foil preparation process was investigated by means of bit etching, EBSD micro orientation analysis and X-ray method.
采用蚀坑法、EBSD微取向分析和X射线法等手段，对稀土电解电容器用铝箔制备过程中的织构演变规律进行了研究。
The texture evolution of ferrite during warm compression of Q235 low carbon steel was determined quantitatively by means of orientation mapping based on the EBSD technique.
利用背散射电子衍射取向成像技术定量分析了热模拟单向压缩条件下Q235碳素钢热变形时铁素体的织构形成规律。
In this paper, hot-rolling tests, using scanning electron microscopy, TEM observation and analysis of EBSD technology, microstructure and mechanical properties relationship.
本文通过热轧试验，利用扫描电镜、TEM观察和EBSD技术等分析显微组织与力学性能之间的关系。
The welded interface microstructure was investigated via scanning electron microscope (SEM), electron backscatter diffraction (EBSD) and transmission electron microscope (TEM).
采用扫描电镜、电子背散射衍射和透射电镜研究了焊接界面的组织结构。
The morphology and crystallography analysis of lath martensite within a packet in 17CrNiMo6 steel was studied by electron backscattering diffraction(EBSD) with field emission gun.
利用电子背散射衍射（EBSD）技术和TEM分析方法研究了17CrNiMo6钢中一个形态上的packet内的板条马氏体的形态与晶体学特征。
The twinning process in a magnesium AZ31 alloy with initial texture is quantitatively analyzed during plane-strain compression by means of orientation mapping based on EBSD technique.
利用背散射电子衍射取向成像技术，定量分析了具有初始织构的AZ31镁合金平面应变压缩时的孪生过程。
EBSD (electron backscatter diffraction) is a relatively new, scanning electron microscope-based technique used to characterize microstructures and textures in polycrystalline materials.
电子背散射衍射(EBSD)是一种较新的，用来分析多晶材料显微结构和组织的扫描电子显微镜技术。
The reason of the Weld Joint Cracking on high frequency welding pipe was investigated by using macroscopic observation, metallographic technology, fracture analysis and EBSD technology.
本文通过使用宏观观察、金相分析、断口分析和电子背散射衍射（EBSD）等分析手段对高频焊管焊后弯管开裂的原因进行了分析。
The textural features during ferrite refinement by deformation enhanced transformation were analyzed by means of orientation mapping based on the EBSD technique in a Q235 low carbon steel.
利用背散射电子衍射取向成像技术定量分析了热模拟单向压缩条件下Q235碳素钢热变形时铁素体的织构形成规律。
Since the quality of metallographic sample has great effect on the accuracy and precision of testing results, several preparations of electron backscatter diffraction(EBSD) sample are introduced.
电子背散射衍射样品的制备质量对其成像效果的影响至关重要，着重介绍了几种有效的样品制备方法。
The evolution of microstructure and texture characteristic of 436 ferritic stainless steel sheets, which were hot rolled under different rolling temperatures by EBSD technology, was investigated.
利用EBSD技术研究了不同热轧温度下436不锈钢热轧织构的变化规律和显微组织特征。
The principles of X ray diffraction(XRD) and electron backscatter diffraction(EBSD) are introduced, and their applied characteristics described in texture analysis of steel sheet by taking examples.
介绍了X射线衍射（XRD）法和电子背散射衍射（EBSD）法的原理。结合实例阐述了两种方法在钢板织构研究中的应用特点。
The principles of X ray diffraction(XRD) and electron backscatter diffraction(EBSD) are introduced, and their applied characteristics described in texture analysis of steel sheet by taking examples.
介绍了X射线衍射（XRD）法和电子背散射衍射（EBSD）法的原理。结合实例阐述了两种方法在钢板织构研究中的应用特点。
应用推荐