Alternatively, it is recommended that filtering be done as part of the data output process, just before it is rendered as part of the dynamic page.
另外，建议就在数据作为动态页面的一部分呈现之前，将过滤作为数据输出过程的一部分来完成。
The many complex factors and the dynamic nature of data means that an optimal plan evaluation is often a complex process indeed for any database system.
这么多复杂的因素，再加上数据本身的动态性，使得最佳计划的评估对于任何数据库系统而言通常都是一个复杂的过程。
In this paper, by analyzing the experimental data and dynamic calculation data, the influences of heat recovery process and heat recovery time on system performance are analyzed.
本文通过对计算数据和实验数据的分析，确定了回热过程及回热时间对系统性能的影响。
The dynamic measurement is a non stationary random process varying with the measuring time. The dynamic measuring data have the characteristics of time variation, randomness, correlation and dynamic.
动态测量是随测量时间而变化的非平稳随机过程，动态测量数据具有时变性、随机性、相关性和动态性四个基本特性。
The method not only can describe process attributes according to dynamic rules, but also can make full use of field running and analysis data in order to identify structural parameters.
该方法既保证了按照动力学规律描述过程特性，又充分利用现场运行和分析的数据，辩识模型结构参数。
It was put forward to apply neural network method to process the dynamic compression test data of molded pulp products.
根据纸浆模塑制品动态压缩试验的测试数据，提出了采用神经网络方法对试验数据进行处理。
In this paper two contents are studied: the data library of mold standard parts, dynamic simulation of the punching process and the mold's mechanical-electrolytic polishing.
本文进行了模具标准件数据库、冲压过程动态仿真和模具的机械电解复合抛光技术两方面内容的研究。
In dynamic process, only directly getting the data from extend memory is OK.
动态过程中，只需从扩展内存中取数据即可。
Based on properties of steel manufacture process, use of dynamic data mining in quality control is described. General methods for quality prediction and analysis with data mining are introduced.
本文从钢铁生产过程的特点出发，将动态数据挖掘运用于质量控制中，阐述了利用数据挖掘解决质量预测问题和质量分析问题的一般方法。
The uniform analysis technique of steady and dynamic data has been realized to ensure the analysis to wide area, long process and developing faults.
实现了稳态和动态过程的记录与统一分析，为分析大范围、长过程和发展性的故障提供了依据；
The reliability of data in continuous casting process is prerequisite for a successful application of dynamic secondary cooling control system in the continuous casting of steel.
连铸过程数据的可靠性是连铸二冷动态控制系统成功应用的前提。
Because the process of rock broken is very complicated, there is a difference between the experimental data and theoretical result of expanding fissure by the present dynamic fracture theory.
由于岩石破碎过程非常复杂的，采用当前的动态断裂理论得出的裂纹扩展长度与实测值差异较大。
Finally, based on the digitalization management platform and computer, we fulfill the dynamic data collection, treatment, analysis and decision in construction process.
最后，以数字化管理平台为基础，计算机为辅助工具对施工过程实现动态数据的收集、处理、分析和决策。
Up to now, study on the DST and dynamic adsorption is in the process of accumulating the experimental data and bringing forward theory model.
目前对动态表面张力和动态吸附的研究，基本上还处于积累实验数据，提出理论假设和模型的阶段。
The simulation results showed that the dynamic transferred curves were in correspondence with the process operation data, so that the simulation model was proven to be reliable.
仿真结果表明该模型在稳态工况下模拟结果及动态过渡过程曲线均与工厂操作数据吻合，仿真模型可靠。
The model and process presented in this paper can also be applied to dynamic testing data processing of other industrial vehicles in cyclic operation.
文中所建立的数据模型和方法，亦适用其他循环作业机械动态测试数据的处理工作。
The dynamic process of maps based on different scales is given and the method of drawing multi-scales roadways based on a set of data.
给出了不同比例尺矿图的动态绘制过程。实现了利用一套数据进行多比例尺巷道的动态生成方法。
It USES a unique algorithm to individually process each pixel so that image data has the widest possible dynamic range.
它采用独特的算法，单独处理每个像素，使图像数据有尽可能广泛的动态范围。
Utilizing the recorded fault data to replay the transient process, the dynamic load model could be verified by the comparison between measured curves and simulation ones.
利用故障录波信息重演负荷特性的暂态过程，通过实测曲线和负荷模型仿真曲线的比较，进行负荷动特性模型的校验。
The results provide basic data for monitoring, modelling and controlling the dynamic process of nitrification by respirometry-titrimetry.
研究成果为硝化过程动态响应监测、过程控制和模型模拟提供基础资料。
The traditional system just pays attention to the finished product, instead of the management of dynamic data during the designing process.
但传统的图档管理系统只注重对最终设计成品的管理，缺乏对设计过程中数据的管理。
We promote the precision of control system by using Kalman filter to process the sample data and intensify the dynamic tracking properties by adding feed forward.
对采样数据进行卡尔曼滤波以提高控制的精度并且加入前馈增强系统的动态跟踪性能。
During the process of developing the system, many key technical problems such as how to get data from CAD drawings, dynamic links to database and how to deal with chart data have been well resolved.
开发过程中，对系统中的关键技术如CAD图形信息获取、数据库动态连接功能的实现以及如何对图表数据进行处理提出了相应的解决方法。
It is proven that the model is well applicable to line process data with the dynamic characteristics, and can also provide basis for spatiotemporal data model whole designing.
结果表明，该模型能够很好地应用于具有时空过程特性的线数据中，也为时空数据模型的总体设计提供借鉴。
In process of programming of management information system, data dictionaries of single-select, dynamic self-maintain, tree-structure and multi-select were the typical kinds.
介绍了管理信息系统中常用的数据字典录入类型：普遍单一选择数据字典、动态自维护数据字典、树型结构数据字典和复选数据字典。
The system comprised terrain and meteorological data pre-process module, vegetation dynamic simulation module (including disturbance) and results analysis module.
干扰模拟体系由地形数据预处理、气候数据预处理、植被动态模拟(含干扰)、结果分析四大模块组成。
The system comprised terrain and meteorological data pre-process module, vegetation dynamic simulation module (including disturbance) and results analysis module.
干扰模拟体系由地形数据预处理、气候数据预处理、植被动态模拟(含干扰)、结果分析四大模块组成。
应用推荐