The results show that this model well conforms to the actual operation and can be used for simulation system construction, system control strategy study and dynamic performance analysis of the system.
结果证明此模型能够与实际运行情况很好地吻合，可用于仿真系统的构建、系统控制策略的研究及系统动态性能的分析等。
Simulation model of dynamic aerobic compost and its application.
动态好氧堆肥模拟模型研究与应用。
According to the kinetic characteristic of targets in midcourse and the RCS data of static measurement of the model, a simulation method for dynamic RCS data of radar targets is proposed.
根据中段弹道目标的运动学特性，结合室内缩比模型RCS静态测量数据，提出了一种雷达目标动态rcs仿真的方法。
On the puzzle of dynamic simulation of tunnel excavation with centrifuge model, this thesis makes a trial research on the section of SK3 + 395 of Shenzhen Metro and has made some progress.
并针对动态模拟隧道开挖这一难题利用离心模型对深圳地铁sk3 + 395断面进行了尝试性的研究，取得了一定的进展。
Simulation results based on ideal mathematical model and industrial model show that the PID Elman network is prior to the modified Elman network in identification of nonlinear dynamic systems.
无论是理想的数学模型还是实际工业模型，计算机仿真结果均证明，将P ID型网络用于动态系统辨识具有更好的逼近效果。
Based on mechanism analysis, a dynamic model of FCCU reactor-regenerator system is given. It can be used for simple process characteristic analysis and for control system simulation.
针对催化裂化装置反应再生系统，进行了动态机理建模研究，给出了可以用于过程特性分析和控制系统仿真研究的动态机理模型。
A system simulation study was done for full digital welding inverter, and a method of connecting dynamic arc load model to the system with controlled source was presented.
从整体上对数字控制逆变焊机系统进行了仿真研究，提出用受控源的方法实现了动态电弧负载模型与系统的连接。
The simulation results show that this model reflect the turbocharged diesel engine dynamic characteristics well and can be used in the dynamic simulation of total vehicle system.
仿真的结果表明，这个模型较好地反映了涡轮增压柴油机动态特性，可以将此模型应用于整车的动态仿真中。
Finally, the dynamic mathematic model has been put into the simulation-testing platform to test the static simulation precision and dynamic response specific characteristic of the model.
并且将本模型嵌入到现有仿真平台进行仿真试验，得到一系列的仿真数据，用以检验模型的精确度和动态响应特性。
As a container of simulation model component, it provides function interfaces for simulation model management of crops and function of dynamic transfer.
该系统作为模拟模型构件的容器提供了对作物模拟模型的管理和动态调用功能接口。
Finally, the feasibility of model predictive control can forecast reasonable inventory level and control dynamic and uncertainty supply chain system are shown by the simulation results.
最后，仿真结果表明，模型预测控制技术在预测合理库存水平以及控制动态、不确定的供应链系统是可行的。
This paper, based on the consideration of the varying reliability with time and the time value of capital, presents a dynamic model and makes simulation analysis.
本文在考虑可靠性随时间变化和资金时间价值基础上提出了动态模型，并进行了模拟与分析研究。
The model of ACB mechanisms for dynamic simulation was built with multi-body dynamics simulation program ADAMS, and the dynamic characteristics were obtained by simulation analysis.
利用多体动力学仿真分析软件ADAMS，对断路器机构系统进行动态仿真建模与分析，获得其分闸过程的动态特性。
A simulation model for the dynamic steering processes of tracked vehicles was established, based on steering dynamics and engine transient working processes.
本文基于履带车辆转向动力学和发动机动态工作过程，建立了履带车辆动态转向过程的仿真模型。
For achieving the dynamic simulation of air ABS, four math models whole vehicle model, single wheel model, tire model and arrester model were built in thesis.
为了实现气压abs的动态仿真，建立了汽车动力学的四个数学模型：整车模型、单轮模型、轮胎模型和制动器模型。
It is critical effect to grip the dynamic characteristic of water-steam system of boiler which establishes the dynamic mathematical model and do research analysis on simulation.
借助于计算机仿真技术，建立锅炉汽水系统的动态数学模型，进行仿真研究分析，对掌握汽水系统的动态特性起着非常重要的作用。
A static relations curve of the main movement parameter is given by means of computer simulation and by an established mathematical model, and the system dynamic characteristic analyzed.
利用所建立的数学模型，采用计算机模拟的方法，得到了主要参数间的静态关系曲线，并分析了系统动态特性。
The primary structure and functions of the Heilongjiang dispatcher training simulation system are described with emphasis on its electric system model including static model and dynamic tide model.
介绍了黑龙江省调度员培训模拟系统的主要组成部分，着重阐述了电力系统模型。包括静态模型及动态潮流模型。
The smoke flow of the model is simulated and the dynamic simulation display the process of fire smoke flow vividly.
对整个模型的烟流流动作了动态模拟，形象直观地显示了火灾过程烟流流动情况。
Using computer simulation technology, this thesis is aimed to build a model of KM385BZL crankshaft and to analyze its dynamic characteristic in normal working condition.
本文旨在利用计算机的仿真技术建立KM385BZL曲轴模型，分析该型曲轴正常工况下的动态特性。
The Single Input and Single Output(SISO)modal experiment and numerical simulation was used to study the dynamic behavior of a CFST column-H steel beam frame structure model.
方法利用单输入单输出（SISO）模态试验方法和数值模拟方法，对一榀钢管混凝土柱-H钢梁框架结构模型的动力特性进行测试分析。
Utilizing mechanism analyzing and statistical analyzing methods, a dynamic model of secondary air systems has been constructed and its effectiveness and accuracy validated by simulation.
采用机理分析和统计分析的方法，建立了二次风系统非线性动态模型，并通过仿真验证了模型的有效性和准确性。
Drawbead model has been applied to the dynamic explicit FEM analysis of sheet metal forming process and the simulation of deep drawing of rectangular viewfinder of automobile headlight been realized.
将拉延筋模型引入到板料成形动力显式有限元分析中，并以汽车前照灯矩形反光镜为应用实例，对其拉延成形过程进行了模拟。
The dynamic simulation model based on the multi-rigid-body theory of the passenger restraint system for side impact of a car is created, and its validity is verified by tests.
针对某轿车建立了基于多刚体理论的侧面碰撞乘员约束系统动态仿真模型，并依据试验结果进行了模型的有效性验证。
By comparing the results of Taylor test and computational simulation, a validating and optimizing method on dynamic constitutive model material constants was proposed.
通过实验数据和数值模拟结果的对比，研究了泰勒杆实验在材料动态本构关系参数确认和优化方面的应用。
Base on this, the paper more improve spreading model of the existing post-earthquake fire and have developed the spreading dynamic simulation system of post-earthquake fire base on GIS.
在此基础上进一步改进现有的地震火灾蔓延模型，开发出基于GIS平台的地震次生火灾动态蔓延模拟系统。
This paper studies the dynamic mathematical model of the dual fuel servo system in gas turbines by the methods of the theoretical modelling and digital simulation.
采用理论建模和数字仿真方法，对燃气轮机双燃料伺服系统的动态数学模型进行研究。
This paper studies the dynamic mathematical model of the dual fuel servo system in gas turbines by the methods of the theoretical modelling and digital simulation.
采用理论建模和数字仿真方法，对燃气轮机双燃料伺服系统的动态数学模型进行研究。
应用推荐