Authors suggest a practical method based on dynamic analysis of finite element for modifying natural frequencies of hull grillage beam, and its software is completed.
提出一种基于有限元结构动力分析的船体板架固有频率实用修改方法，并进行了软件设计。
Considering characteristics of grotto relics the influence factors and dynamic finite element analysis methods on deformation stability grotto country rock are discussed.
针对石窟文物的特点，阐述了影响石窟围岩变形稳定性的主要因素和动力有限元分析方法。
Theoretical analysis is done on the static and dynamic characteristics of the structure, differential equations are presented, and it is also verified by the finite element method.
同时对机构进行了静态和动态特性理论分析，提出了机构静态和动态计算解析式，并用有限元方法对机构动态和静态特性进行了验证。
This method takes advantage of the dynamic simulation function of finite element analysis and the thermodynamic theory to calculate the value of thermal flux.
该方法利用动力学分析功能，结合传热学原理求解热流传递数值；
Dynamic condensation methods for finite element models have been broadly applied in eigenvalue problems of large structures, test analysis model correlation and so on.
有限元模型的动力缩聚法已被广泛地应用到大阶系统的特征分析、试验-分析模型的相关分析等领域中。
Using the synthetic method of both finite element and modal analysis searches after a basic way of dynamic Safety design.
采用有限元数值模型与实验模态分析相结合的方法，寻求动力安全设计的基本方法。
The paper analysis strength of the vibrating screen, put forward improving method for its structure, with the dynamic finite element method and dynamic measure.
本文用动态有限元理论计算及在线测试分析方法，对振动筛的强度作了分析，提出了筛体结构的改进方法。
Using the method of mode analysis, the author analyses the hookup on the way of finite element, and gives the dynamic characteristic of hookup.
利用模态分析的方法，对悬挂装置进行有限元动力分析，得到了悬挂装置的动态特性。
Considering characteristics of grotto Relics, the influence factors and dynamic finite element analysis methods on deformation stability grotto country rock are discussed.
针对石窟文物的特点，阐述了影响石窟围岩变形稳定性的主要因素和动力有限元分析方法。
With combining bone remodeling with finite element analysis, the dynamic process of canine tipping movement during a therapy period is simulated and the stress distribution in each phase is obtained.
将骨重建过程与有限元分析相结合，对尖牙在一个治疗周期内的倾斜移动过程进行模拟并得到各阶段的应力分布。
Complex analysis is an effective finite element method to simulate the dynamic response of rock soil mass to earthquake.
复反应法是用来分析地震动力作用下岩土体动力性质的有限元方法之一。
By using a dynamic contact analysis, a finite element model is developed to calculate the response of composite laminates to low velocity impact. A numerical example is given.
利用动力接触分析方法模拟冲击的接触行为，提出了一种新的计算复合材料层板低速冲击响应的有限元模型。最后给出一个算例。
Dynamic analysis of structure through combining the finite element method with the experimental mode is a practical reliable and effective modern method.
试验模态分析与有限元计算相结合的研究方法是一种实用、可靠的结构动态分析的现代方法。
The seismic analysis of liquid storage container is conducted by finite element method for transient dynamic fluid-solid coupling model.
应用流体固体动力耦合统一分析模型的有限元法，进行了储液池的抗震分析。
Based on the finite element analysis results of the dynamic properties of the structure, the acoustic radiation of the structure is analysed using the results of the surface velocity distribution.
在用有限元法分析结构动态响应特性的基础上，利用有限元分析得到结构表面振动速度分布，分析表面阻尼处理板结构的声辐射。
To test and verify the reliability of equivalent beam method, finite element method is applied to the analysis on dynamic characteristic of frame style subway bridge.
为验证等效梁法的可靠性，运用有限元法对框架式地道桥的动力特性进行了分析。
This paper presents a direct finite element method for analysis of dynamic soil-structure interaction. It can be performed by use of the large general structure analysis software.
本文给出结构-地基动力相互作用分析的一种直接有限元方法，可以依托大型结构分析软件完成结构-地基动力相互作用研究工作。
Then this paper introduces the principle and method of finite element dynamic analysis of spatial composite structure like gate.
介绍了闸门这类复杂空间组合结构有限元动力分析的原理和方法。
On the basis of the modal analysis, the nonlinear finite element is used to analyze the dynamic response of suspension pipe bridge to cross wind excitation.
在模态分析的基础上，采用几何非线性有限元的分析方法，对悬索式管桥进行了横向风共振分析。
Concrete example is given and the dynamic analysis program of fuzzy stochastic finite element is programmed to test and verify the feasibility of the paper's view and method.
给出了具体的算例，同时编制了模糊随机机构动力分析的有限元程序，验证了本文的观点和方法是可行的。
The finite element dynamic analysis model of the spindle assembly was developed by taking the advantage of the spring-damper elements to simulate the bearing supports.
在对主轴部件分析模型进行研究的基础上，采用弹簧阻尼单元模拟轴承支承的方法，建立了主轴部件动力学分析有限元模型。
Dynamic character of oil testing pipe shock absorber system under impact load were searched which were based on finite element analysis software ANSYS in this paper.
本文基于有限元分析软件ANSYS研究冲击载荷下石油测试管柱减振系统的动力学性质。
Then the finite element molding process of the pulley is discussed, and the pulley is studied by the static analysis and dynamic analysis.
然后论述滚筒的有限元分析建模过程，并对滚筒做了静力分析和动态分析。
Then the characteristics of frequency variation during the fatigue crack propagation process are simulated by three - dimensional dynamic finite element analysis.
并利用三维动态有限元模拟了点焊接头疲劳裂纹扩展过程中频率变化特性。
In paper, the structural static strength and dynamic characteristic of pole? Tower of aerial power? Delivery line are analyzed and discussed with the finite element analysis.
主要利用有限元方法对架空送电线路杆塔进行结构强度和结构动力学特性分析。
A finite element model for nonlinear dynamic analysis of reinforced concrete block shear wall is pointed out.
本文提出了配筋砼砌块剪力墙非线性动力分析有限元模型。
Incorporating with the model dynamic experiment and Finite-Element seismic analysis of a shear-wall superhigh building, paper gives the earthquake resistant behavior of such structures.
本文结合一超高层钢筋混凝土剪力墙一核心筒结构的模型试验与有限元动力分析，对超高层筒体结构的动力特性作了具体研究分析。
Based on the modal test results of truck cab, the finite element model for dynamic analysis of the truck cab was modified.
本文利用货车驾驶室的测试模态参数来修正其有限元动力分析模型。
Based on the modal test results of truck cab, the finite element model for dynamic analysis of the truck cab was modified.
本文利用货车驾驶室的测试模态参数来修正其有限元动力分析模型。
应用推荐