Memory interface is a very important link in the DSP system design of TI company.
DSP和外部存储器接口是TI公司的DSP系统设计中的重要环节。
In a digital imaging embedded DSP system design, it is necessary to realize the communication between embedded DSP system and PC for its cross-development system and its debug.
在数字成像嵌入式DSP系统开发中，为搭建交叉开发平台，便于系统调试，常常需要实现嵌入式DSP系统与计算机之间的通信功能。
In an digital imaging embedded DSP system design, it is necessary to realize the communication between embedded DSP system and PC for its cross-development system and its debug.
在数字成像嵌入式DSP系统开发中，为搭建交叉开发平台，便于系统调试，常常需要实现嵌入式DSP系统与计算机之间的通信功能。
At the same time, it also use embedded ICE commissioning technical to simplify system design, and a digital signal processor (DSP) enhance extended to improve performance.
与此同时，它也使用嵌入冰调试技术来简化系统的设计，和数字信号处理器(dsp)增强扩展来提高性能。
This paper introduces a method of hardware constitution and software design of embedded system containing Ethernet interface and adopting DSP as its core processor.
介绍了以DSP为核心具有以太网接口的嵌入式系统的硬件电路组成和软件设计方法。
This paper presents the hardware, software design and structure diagram of the DSP chip which improves the system stability and reliability.
文中给出系统硬件、软件设计结构和原理图，改善了原有光电测速精度，提高了系统工作稳定性和可靠性。
In order to satisfy the quick operating speed, strong timeliness , the higher request precision , we have selected TI Corporation's DSP chip TMS320C5416 as the core carry on the system design.
为满足运算速度快、实时性强、精度要求高等要求，我们选用了TI工公司的DSP芯片TMS320C5416为核心进行系统设计。
Taking the design of the industry on-line state detection Data Acquisition System as example, the paper discusses the main processes on the software and hardware design based on DSP and USB.
本文以应用于工业测试系统的在线状态检测数据采集系统的设计为例，讨论了基于DSP数字信号处理器和USB通用串行总线接口数据采集系统的软硬件设计的主要步骤和过程。
This paper discusses the method of design and realization of digital chaos encryption system based on DSP.
本文论述的是基于DSP的数字混沌加密系统的设计与实现方法。
The main content of this paper is about the design of digital control system of AMB based on DSP.
本文主要内容是以数字信号处理器(dsp)为核心设计主动磁轴承的数字控制系统。
This paper gives a design of sensor-less direct torque control system based on DSP (TMS320LF2407A). The hardware and software schemes are introduced.
提出了一种基于DSP（TMS320LF2407A）无速度传感器直接转矩控制系统，给出了硬件设计和软件设计方案。
A kind of iris image acquisition system is proposed based on floating-point DSP chip TMS320VC6711. Its principle, design and realization of software and hardware are introduced.
提出了一种基于红外光源的、以浮点DSP芯片TMS320 VC 6711为核心的虹膜图像采集系统，介绍了其工作原理、软硬件设计与实现。
This paper presents the design and realization of a DSP based high speed data acquisition and processing system.
本文介绍了一种基于DSP的高速数据获取及处理系统的设计和实现。
In the area of hardware design, the system uses TMS320LF2407 DSP as microprocessor, and uses intelligent power module (IPM) as inverter, which is drived by high-speed optocouplers.
在系统的硬件设计中，处理器采用TMS320LF2407数字信号处理器（DSP）；逆变器采用智能功率模块（IPM），并采用高速光耦对其驱动。
The platform of blocking learning system using DSP technology and the design of the hardware module, software module and the building blocks experiment are also described.
该文介绍了自主模块化dsp技术的实验教学系统平台以及硬件模块、软件模块和积木式实验的设计。
The Texas Instruments company promotes high-performance floating-point DSP chip TMS320C6713 obviously enhanced the embedded application performance, reduced the system design order of complexity.
德州仪器公司推出的高性能浮点DSP芯片TMS320C6713显著提高了嵌入式应用的性能，降低了系统设计的复杂度。
To design the high reliability DSP (Digital Signal Processing) applied system is the key problem in the application of DSP chip.
设计高可靠性的DSP(数字信号处理器)应用系统是DSP芯片实际应用中所遇到的关键问题。
In this paper, a design of digital stored oscillograph display system based on DSP is presented.
本文提出了一种基于DSP的数字存储示波器显示系统的设计方案。
Then it explains the performance and characteristic of this DSP. We design the control system which is based on TMS320LF2407A DSP.
简要介绍了这款数字信号处理器的功能和特点，设计了以TMS320LF2407A DSP控制器为核心的控制系统。
Digital signal processor (DSP) was adopted to design portable rotating air blower fault diagnosis instrument, and the system hardware structure and the software designing ideas were expounded.
以数字信号处理器DSP研制便携式旋转风机故障诊断分析仪，并详细阐述了系统的硬件结构以及软件设计思想。
From the study of laser machining, design the CNC system based on the DSP and the microcontroller.
通过对激光加工特性的研究，设计了基于DSP与单片机为核心的激光加工数控系统。
The design of the system fabric the DSP control board the algorithm of waveform generating and the power amplifier are introduced.
文中着重介绍了系统架构、DS P控制板、波形产生算法和功率放大器的设计。
On analyzing the application of the real-time information procession system, this paper describes a Multi-DSP procession system and expatiate the key technologies in hardware and software design.
文章在分析实时信息处理系统应用需求的基础上，描述了一种多dsp处理系统结构，并阐述其软硬件设计中的关键技术。
We have realized the hardware and the software design of DSP high speed data acquisition system. Used the reasonable filter algorithm to increase the system data acquisition precision.
实现了DSP高速数据采集与监控系统的硬件和软件设计，采用了合理的滤波算法提高系统数据采集精度和实时性。
The algorithm of strapdown gyrocompass system is replanted into DSP for realization, and feasibility is validated by experiment, so the design of strapdown gyrocompass system based on FOG is finished.
将捷联式罗经算法移植到DSP系统中加以实现，通过实验验证了整个系统算法的可行性，从而完成了捷联式光纤陀螺罗经系统的设计。
So we design a net transmission system based on DSP and network card. We present the whole circuit design and corresponding software.
因此基于DSP和网卡设计了一个网络传输系统，给出了系统整体电路设计和相应的软件程序。
This paper introduces the design method of an infrared focusing control system based on DSP.
介绍一种基于DSP的红外调焦控制系统的设计方法。
The third chapter offers SRD control system design of hardware and software based on TIs DSP.
第三章介绍了以TI的DSP为核心的控制系统的软硬件设计。
This paper presents an open software design of a DSP - based high - speed motion control system, which is applied in laser rapid - prototyping system.
描述以基于DSP处理器为核心，用于激光快速成型系统的高速运动控制系统软件的体系结构及其开放式设计。
This paper presents an open software design of a DSP - based high - speed motion control system, which is applied in laser rapid - prototyping system.
描述以基于DSP处理器为核心，用于激光快速成型系统的高速运动控制系统软件的体系结构及其开放式设计。
应用推荐