Running setmqaut once with +dsp and once with +inq results in an effective permission of +dsp +inq.
使用 +dsp运行一次 setmqaut，然后再使用 +inq 运行一次，所得到的权限为 +dsp +inq。
Deep research into DSP technology and computer bus technology, design the hardware and circuit interface of PC and DSP.
深入探讨了DSP技术和计算机的总线接口技术，设计了PC及DSP的硬件电路接口。
DSP plays a more and more important role in the field of multimedia application, in which the core codec algorithm based on DSP is the key point.
DSP在多媒体视频应用领域发挥着越来越重要的作用，基于DSP的核心编解码的实现是其应用的关键。
VLIW DSP has simple control hardware, and its ILP is decided during the compile time, so compiler is the key factor in developing applications based on VLIW DSP.
VLIWDSP机器由于硬件控制简单，指令的并行性完全在编译时决定。因此编译程序成为基于VLIW DSP机器应用的关键因素。
So, the thesis adopts a type of low loss DSP processor as main controller which composing the control and fault feeder detection system based on DSP in order to deal with the question.
因此论文采用了低功耗的数字信号处理器作为主控芯片，构成一种基于数字信号处理器的控制与选线系统。
This paper presents a design technology from a compilation view for embedded DSP processors. Under the guidance of this method, it designs a 16 bits DSP core.
从编译的角度对嵌入式DSP核提出了设计方法，并用此方法设计了16位定点DSP核。
The structure and function of Digital Signal Processor (DSP) and the application of DSP on UPFC experimentation device are presented in this paper.
介绍了数字信号处理器的基本结构和功能及其在统一潮流控制器实验装置中的应用。
Then it explains the performance and characteristic of this DSP. We design the control system which is based on TMS320LF2407A DSP.
简要介绍了这款数字信号处理器的功能和特点，设计了以TMS320LF2407A DSP控制器为核心的控制系统。
The article takes the LCD module of T6963C controler with built-in LCD for example, presenting its software and hardware interface with DSP(TMS320C542) in DSP application.
本文以内藏液晶显示控制器（T6963C）的液晶显示模块为例，介绍了其在DSP测控系统中与DSP芯片（TMS320C542）的软件和硬件接口形式。
Then, introduces about DSP , which is the basis knowledge of next design Based on DSP exciter control devices .
然后，介绍了DSP的基础知识，为下一步进行设计基于DSP的励磁控制装置做好准备。
In the hardware of system, it introduces the detailed hardware of DSP excitation regulator, including the design of DSP peripheral circuit, digital circuit and impulse unit circuit.
在硬件组成中，详细地介绍了DS P励磁调节器的硬件组成部分，其中有DSP外围电路的设计，数字电路和脉冲产生单元的设计。
The proposed DSP employs parallel processing techniques, such as SIMD, vector processing, DSP schemes and adopts low power features for wireless applications.
提出的DSP采用了并行处理技术，如SIMD、矢量处理和DSP结构，并且采用了无线电应用的低功耗特性。
In an digital imaging embedded DSP system design, it is necessary to realize the communication between embedded DSP system and PC for its cross-development system and its debug.
在数字成像嵌入式DSP系统开发中，为搭建交叉开发平台，便于系统调试，常常需要实现嵌入式DSP系统与计算机之间的通信功能。
The waveform generator is composed by DSP and quadrature digital upconverter (QDU). DSP is used as main controller to decide the modulation mode and output waveform of QDU.
波形产生器主要由dsp和数字上变频器构成，DS P作为主控制器设定数字上变频器的调制方式和输出波形。
In a digital imaging embedded DSP system design, it is necessary to realize the communication between embedded DSP system and PC for its cross-development system and its debug.
在数字成像嵌入式DSP系统开发中，为搭建交叉开发平台，便于系统调试，常常需要实现嵌入式DSP系统与计算机之间的通信功能。
Multiple DSP parallel digital signal processing system is one of most important method for high-speed DSP system, which find wide application in many different spheres.
多信号处理器并行运算是提高数字信号处理系统运行速度的主要方法之一，具有广阔的应用前景。
DSP adopts Harvard structure in which program memory and data memory are divided. DSP can realize various digital signal process algorithms by special hardware multiplier.
DSP内部采用程序和数据分开的哈佛结构，具有专门的硬件乘法器，可以用来快速地实现各种数字信号处理算法。
To design the high reliability DSP (Digital Signal Processing) applied system is the key problem in the application of DSP chip.
设计高可靠性的DSP(数字信号处理器)应用系统是DSP芯片实际应用中所遇到的关键问题。
On chip in Circuit Emulator (ICE) module is most important for debugging and emulating actual DSP systems. It is very effective to accelerate the process of DSP systems development.
片上的在电路仿真器(ice)模块，对于支持DSP系统的实时仿真和调试，加快系统开发进程是至关重要的。
In the DSP software programme, the thesis accomplished the fast correlation algorithm on the DSP TMS320C6713.
在DSP的软件编程上，本文完成了快速相关算法在于TMS320C 6713上的实现。
Design of the system driver, including the software of FLASH's erase and programming by DSP, BootLoader and the interface communicator between the DSP and the RTL8019AS.
系统部分驱动程序的设计，包括DSP对FLASH烧写和擦除的软件实现、程序的自举加载、DSP与RTL 8019as接口通信程序设计。
A processing platform is established by integrating DSP with FPGA, the multi-DSP communicates through HPI interface and multi-DSP parallel process is implemented.
该系统由dsp和FPGA相结合构成一种处理平台，多dsp通过HPI接口进行通信，实现了多dsp并行处理。
Its hardware is composed of DSP controlling board and motor driving board. There are two choices for the serial communication between the DSP board and the PC.
控制系统硬件部分由DS P控制板和电机驱动板组成，DS P控制板与上位机之间的串口通讯有无线和有线两种方式可以选择。
The DSP and CPLD based motion controller fully displays the fast data calculation ability of DSP and the hardware management ability of CPLD.
其中基于DSP和CPLD的运动控制器充分发挥了DSP快速数据运算能力和C PLD的硬件管理功能。
The design of categorized DSP little system and adjudicate DSP little system.
分类DSP小系统和判决DSP小系统的设计。
On DSP, 2000 Series fixed-point DSP FFT algorithm in greater detail, and we can share.
关于DSP的，使2000系列定点DSP的FFT算法比较详细，可以和大家分享的。
It provides a good software platform for DSP design and DSP algorithms implementation.
为评估DSP硬件设计、DSP算法的实现提供了很好的软件模拟平台。
In this paper it is presented the development tendency of oversea DSP technique, main manufacturers of DSP and their leading products as well as the typic system.
文中介绍了国外DSP技术的发展趋势，国外DSP的主要生产公司及其主导产品，并介绍了典型的DSP系统。
Embedded system based on DSP is the general purpose system that embeds DSP system into the electronic system.
DSP嵌入式系统是把DSP系统嵌入到应用电子系统中的一种通用系统。
The portable blade frequency measurement instrument based on DSP is designed next. The DSP-based circuit board is made and the software program for testing hardware circuit board is coded.
论文完成基于DSP芯片的便携式叶片频率测试仪的硬件电路设计和电路板的制作，并完成对电路板的测试。
应用推荐