The mechanism of thermal expansion of hydraulic cement paste is also re searched with DSC/TG and XRD methods.
借助于DSC/TG和XRD测试手段，对水泥石的热膨胀性能变化规律进行了机理分析。
Structures and properties of these materials were studied by X-ray diffraction (XRD) analysis, scanning electronic microscopy (SEM) observation and differential scanning calorimetry (DSC) analysis.
并采用X—射线衍射分析、扫描电镜和差热差重分析，研究了复合蓄热材料的性能和结构。
The crystal phases and microstructure of the as-received glass-ceramics are investigated by DSC, XRD, and SEM.
采用DSC、XRD、SEM等研究了赤泥微晶玻璃的热学特性、相组成以及微观形貌。
The crystal structure and the electrochemical performance were characterized by XRD, SEM, TG-DSC, laser particle-size distribution measurement and electrochemical performance testing.
采用XRD、SEM、TG-DSC、激光粒度分布以及电化学测试等手段对该材料进行了结构表征和性能测试。
The novel Gd-containing sulfide glasses were investigated. Some glass properties including infrared spectra, microhardness, density and the curves of XRD and DSC were tested.
研究了新型含钆硫化物玻璃，测试了玻璃的红外透射光谱、显微硬度、密度等性能以及XRD ，DSC曲线。
The synthesis of poly(ethylene oxide)(PEO) montmorillonite composite by direct melt intercalation of polymer powders in layered silicates is studied by using XRD, IR, DSC and SEM, etc.
用XRD、IR、DSC和SEM等分析方法研究了聚合物粉末直接熔融嵌入合成聚氧乙烯（PEO）-蒙脱石夹层复合材料的过程。
The purification results could be contrasted and analyzed by modern test equipments, e. g. TG-DSC, XRD, Laser-Raman Spectrum.
并借助TG-DSC、XRD和激光拉曼光谱等测试方法对提纯前后的金刚石微粉进行对比分析。
The sintering behavior of white carbon powders by spray pelletization is investigated by DSC and high temperature dynamic XRD.
采用差式扫描热分析和高温动态X射线衍射对喷雾造粒白炭黑微球的烧结行为进行了研究。
The effect of doping Ti on synthesis of magnesium nickel hydrogen storage alloys through XRD, TG-DSC and SEM was reported.
借助于XRD、TG - DSC和SEM等技术研究了掺钛对氢化燃烧合成镁镍储氢合金的合成条件及合金性能的影响。
Enhancement mechanism of S-activator on high calcium PFA expansive cement was studied by means of DSC, XRD, SEM, etc.
采用DSC、XRD、SEM等微观分析方法研究了S -激发剂对高钙粉煤灰膨胀水泥的增强机理。
Its structure, phase change kinetics and the performance of energy storage were analyzed by XRD, IR and DSC methods.
用XRD、IR、DSC等方法对其结构、贮能性能及相变动力学进行了研究。
The suitable process conditions are reached and the structure and properties are characterized by FTIR, XRD and DSC and so on.
对其制备工艺条件进行了系统的研究，利用FTIR、XRD和DSC等方法对其结构与性能进行了分析与评价。
To provide basic data for application of ammonium phosphomolybdate, it is characterised by means of XRD, IR, DSC and TG.
利用XRD、IR、DSC和TG对所制备的磷钼酸铵进行了表征，为磷钼酸铵的应用提供了理论基础。
Mechanical properties of composite PP were tested, and also fracture analysis, XRD analysis; DSC analysis had been done to the composite PP.
对PP复合材料进行力学性能测试、断口形貌观察、XRD结构分析、DSC热分析等分析。
The XRD, EXAFS, DSC, SEM and XPS methods for determining and characterizing amorphous structure, surface morphology and active center of the catalysts were introduced.
介绍了对非晶态合金催化剂的非晶结构、表面形态、活性中心等进行表征和定性的XRD、EX AFS、DSC、SEM和XPS等方法。
The glass forming ability and the thermal stability were also investigated by differential scanning calorimetry(DSC)and X-Ray diffraction(XRD).
利用XRD和DSC等手段对该合金的形成能力及热稳定性进行了分析。
The structures and properties of colloids and coatings were characterized by XRD, SEM, EDS, TG-DSC, VIDAS imagine analyzer, 71model micro-hardness, granularity analyzed etc.
采用XRD、SEM、EDS、TG - DSC、VIDAS图像分析仪、71型显微硬度计以及粒度分析仪等测试手段对胶体和涂层的结构和性能进行表征。
By means of DSC and XRD, the thermal and crystalline properties of polypropylene masterbatch were instigated.
借助于dsc、X -射线衍射等测试手段，对聚丙烯母粒的热行为及结晶特性进行了分析。
The structures, chemical components and properties of the acquired products at room temperature were characterized and analyzed by XRD, Element analysis, SEM, FTIR, TG-DSC and Spectrum analysis.
用常温下的X射线衍射谱、元素分析、扫描电镜、红外光谱、热分析及光谱分析对产物的常温结构、组分及性质进行了表征。
Amine-pillared lanthanum niobates with different chains length as pillars were characterized with XRD, TG and DSC.
用不同链长的有机胺柱撑镧铌酸，采用X射线衍射、热重、差热等分析方法对合成的各种产物进行表征。
The research methods of DSC, XRD, shrinkage rate, SEM were used in experiment. Experimental results reveal. the relationship between crystallization and densification in sintering processing.
通过热分析、X射线衍射、收缩率、扫描电镜等分析方法，详细说明了在烧结过程中晶化和致密化的关系；
Crystallization behavior of cocoa butter (CB) and Chinese tallow cocoa butter equivalent (CTCBE) are studied using powder X-ray diffraction (XRD) and differential scanning calorimetry (DSC).
为了解这一现象与CTCBE结晶行为的关系，拟用X粉末衍射和差示扫描量热法对乌桕类可可脂和天然可可脂在不同条件下的结晶行为进行了研究。
The method of sintering is discussed and advantages are expounds by DSC, XRD, shrinkage rate methods.
通过热分析、X射线衍射、收缩率的测定等分析方法，阐述了烧结法制备微晶玻璃的优越性。
The amorphous ribbons and their crystallization processes were identified by differential scanning calorimeter (DSC) and X-ray diffraction (XRD).
利用X射线衍射仪和示差扫描量热计（DSC），研究该非晶薄带的非晶特性及晶化过程；
Thermal behavior and aggregation structure of the polymers is investigated using DSC and XRD respectively.
采用DSC及XRD，分别对聚合物的热性能及聚集态结构进行分析。
Structure and properties of the special random copolymer of propylene(PPR) for pipe were studied by NMR, XRD, DSC and GPC and compared with imported samples.
采用核磁共振（ NMR）、X衍射仪、 差示扫描量热法（ DSC）、凝胶渗透色谱（ GPC）等分析技术对无规共聚聚丙烯（PPR）管材专用料的结构和性能进行研究，并且与国外料进行了对比。
DSC, XRD, DMA and other testing methods were used to study the crystallization properties, dynamic mechanical properties of different polymer with carbon fiber.
运用DSC、XRD、DMA等测试手段，研究了对于不同树脂基体，碳纤维对基体的结晶性能、动态力学性能等的影响。
The microstructure of the NBR/AO-60 composite was characterized by DSC, SEM, XRD and DMTA, and its thermal and dynamic mechanical properties were studied.
利用差示扫描量热（DSC）、扫描电镜（SEM）、X射线衍射（XRD）、动态力学分析（DMTA）等测试手段对该复合材料的结构进行了表征，并对其动态力学性能进行了研究。
The catalysts composed of V/K/Ca, V/K/Ce may have both amorphous and crystalline phases as demonstrated by XRD and DSC-TG analyses.
经XRD和TG-DSC分析，以钒钾钙、钒钾铈合成的催化剂为非晶态和晶态物质的混合物。
The catalysts composed of V/K/Ca, V/K/Ce may have both amorphous and crystalline phases as demonstrated by XRD and DSC-TG analyses.
经XRD和TG-DSC分析，以钒钾钙、钒钾铈合成的催化剂为非晶态和晶态物质的混合物。
应用推荐