The study of the working technology of a high-speed dry-cutting gear hobber with green performance.
对面向绿色制造的高速干式滚齿机的干式切削加工技术进行研究。
In this paper, the dry-cutting tests were carried out by diamond film coated tool on Si-Al alloy and this tool's cutting properties were studied.
文中通过用金刚石薄膜涂层刀具对含硅量不同的硅铝合金进行干切削试验，探讨其切削性能。
Using diamond film coated tool, the dry-cutting tests are carried out on Si-Al alloy with different Si-contained. The cutting properties are studied.
通过用金刚石薄膜涂层刀具对含硅量不同的硅铝合金进行干切削试验，探讨其切削性能。
The results showed that, for small diameter diamond saw. blade, the life is longer in the dry-cutting than wet thus can improve the value in use obviously.
并对同一锯片做了干湿切对比，结果表明对于小尺寸金刚石锯片，干切的寿命明显高于湿切寿命，提高了锯片的利用价值。
This means cutting out shapes, taping things in place and allowing glue to dry if need be.
这意味着切割出各种形状，把东西贴在特定的地方，需要的话，可以使用胶水。
Other ideas include extracting water and leaving a dry residue for use as fuel or fertiliser, or making latrines into fly traps, hence cutting the spread of disease.
其他构思还有抽离水分将干燥的剩余物用作燃料或化肥，将公共厕所设成捕蝇器从而切断疾病的传播途径。
There's a chance your dry cleaner is cutting corners to save money — at the expense of your clothes.
你所去的干洗店有可能偷工减料以节省开支——以你的衣物受损为代价。
Cutting capital expenditure causes the pipeline of new projects to dry up faster.
削减资本支出导致新项目渠道更快枯竭。
Coolerado's rooftop air conditioner handles dry weather more than twice as efficiently as anything else, cutting energy consumption in the hottest, most AC-dependent desert areas.
Coolerado公司的屋顶式空调处理干燥天气的效率是其他方式的两倍。在最炎热的沙漠地区生活也最依靠空调，使用这种产品就减少了能耗。
Plasma cutting machine mainly with half a dry plasma, dry plasma and underwater plasma three ways.
等离子切割机主要以半干式等离子，干式等离子和水下等离子三种方式。
I waited behind her chair, and was pained to behold Catherine, with dry eyes and an indifferent air, commence cutting up the wing of a goose before her.
我站在她椅子背后侍候着，而且很难过地看着凯瑟琳，她毫无眼泪的眼睛带着漠然的神气，开始切她面前的鹅翅膀。
In this paper analysis is made on the defects of present diamond dry cutting wheels.
本文分析了目前风冷式金刚石干切片存在的缺陷。
Dry plasma cutting: also called the air-filled type cutting, the air compressor to plank cut in order to achieve the effect of cooling seam jet, such cutting costs low, but pollution is very large.
干式等离子切割：又称风冷式切割，采用空压机对板材割缝喷气以达到冷却效果，此类切割成本较低，但是污染很大。
As a kind of new green manufacture technology, dry cutting can not only avoid environment pollution of cutting coolant but also effectively decrease the production cost.
干切削作为一种新型的绿色制造技术，不仅能避免切削液对环境的污染，而且能大幅度降低产品的生产成本。
As a kind of new green manufacture technology, the high speed dry cutting can not only avoid the environment pollution of the cutting coolant but also effectively decrease the production cost.
高速干切削技术作为一种新型的绿色制造技术，不仅能避免切削液对环境的污染，而且能大幅度降低产品的生产成本。
The background and basic principles of dry cutting and its demand for the cutting tool are presented in this paper.
本文介绍了干切削产生的历史背景、基本原理及干切削对刀具的要求与实现途径。
This paper has explained that the high speed dry cutting processing and its key technology(including the cutter technology, the machine tool technology and the technics technology).
阐述高速干切削加工及其关键技术（包括刀具技术、机床技术和工艺技术等）。
For those problems, here is introduced turning titanium alloy (BT20) with the static cooling which is one way of dry cutting.
针对上述问题，介绍了静电冷却(干式切削的一种)车削钛合金bt20的方法。
As a new green manufacturing technology, dry cutting is effective not only in avoiding the environmental pollution due to cutting fluid, but also in dropping production cost greatly.
干切削作为一种新型的绿色制造技术，不仅能避免切削液对环境的污染，而且能大幅度降低产品的生产成本。
By analysis discussion of key technology for dry cutting, discussion the application foreground of dry cutting.
本文讨论了干式切削加工中的关键技术及其应用前景。
The test analyse is conducted to green casting adhesive and green heat treatment and selections of dry cutting tools.
对绿色铸造粘结剂、绿色热处理工艺、干切削刀具选用进行试验分析；
A novel type diamond dry cutting wheel, newly developed by the authors, is introduced, and some of its structure characteristics, production methods and application results are also presented.
并介绍了作者最近研究成功的新型风冷式金刚石切割片的结构特点、制造方法和使用效果。
Argument the drying cutting mainly difficulty, the design specification to dry cutting machine tool, and the back method of machine tool realizes drying cutting.
着重讨论了实现干切削的主要难点、干切削技术对机床的设计要求，以及机床实现干切削的辅助方法。
What material of the stick blade for dry cutting is used?
使用干切的刀条是什么材料。
The characteristics and cutting performance of ceramic tools were elaborated, several technique methods were put forward, and the application of ceramic tools in dry cutting was analyzed.
本文论述了陶瓷刀具的特点和切削性能，提出了提高陶瓷刀具性能的几种途径，对陶瓷刀具在干切削中的应用进行了分析。
The diamond films coated tools are used for turning 'milling and interval cutting, especially for modern high speed dry cutting to increase productivity.
金刚石涂层刀具用于车削，进而用于铣削和间断切削，特别适用于现代高速干切削加工，从而提高生产率。
The characteristics and cutting performance of ceramic tools are elaborated in this paper, and the application of ceramic tools in dry cutting is analyzed.
论述了陶瓷刀具的特点和切削性能，对陶瓷刀具在干切削中的使用进行了分析。
Dry cutting is not recommended.
不推荐干式切削。
A global review of dry cutting tool materials in cutting of the roller and their physical and cutting performance are given, and also promotes the features of them used in cutting of the roller.
综述了轧辊加工中干式切削刀具材料的物理性能和切削性能，阐述了它们在轧辊加工中的特点。
A global review of dry cutting tool materials in cutting of the roller and their physical and cutting performance are given, and also promotes the features of them used in cutting of the roller.
综述了轧辊加工中干式切削刀具材料的物理性能和切削性能，阐述了它们在轧辊加工中的特点。
应用推荐