The nozzle spray characteristics of micro-turbine engines affect the stabilization of flame of the combustion chamber, the distribution of temperature, and the efficiency of combustion.
针对微型燃气涡轮发动机喷嘴的雾化对燃烧室火焰稳定性、温度分布和燃烧效率的影响。
Therefore, the shape of water chamber is in favor of uniform distribution of cooling water volume in tube bundle.
因此，水室的形状应有利于冷却水量在管束中的均匀分配。
The shape of water chamber has a great influence on the distribution of cooling water volume in tube bundle.
水室的形状对冷却水量在管束中的分配有很大影响。
Using the finite element method to analyze the mixing chamber, the temperature distribution as well as the change situation.
利用有限元法对混炼过程中密炼室、胶料的温度分布以及变化情况进行了分析。
In this paper, ion-exchange membrane used for EDI is studied, and flow field distribution modeling of dilute chamber with computational fluid dynamics (CFD) software is studied for the first time.
本文主要对EDI设备中的离子交换膜进行研究，并首次采用计算流体力学(CFD)软件对淡水室隔板的流场分布进行模拟。
Die stress analysis results show that the deformation of the die core increases with welding chamber height. For the stress distribution, there exists a best welding chamber height.
模具变形分析结果表明，随着焊合室深度增加，模芯变形程度增大，对应力分布来说，存在一个最佳的焊合室深度。
The thermal situation for the soaking chamber of CAPL. including heating characteristic. temperature distribution in the furnace and heat equilibrium.
本文介绍某厂CAPL均热室热工工况，包括均热室的供热特点、炉内温度分布及热平衡。
The characteristic of spatial distribution of plasma ion density in reaction chamber were diagnosed by a Langmuir double probe, and the effect of Ar pressure and RF power were also investigated.
利用朗缪尔静电双探针诊断了蒸发镀膜装置反应室内等离子体密度及分析其分布规律，并分析了气压和功率对等离子体分布的影响。
To quickly and accurately obtain temperature distribution in regeneratively-cooled thrust chamber, a method of computing temperature field in thrust chamber was developed.
为了能够快速而准确地得到再生冷却推力室的温度分布，建立了一种计算再生冷却推力室温度场的方法。
A high and uniform temperature distribution along the outer surface of the combustion chamber is necessary to ensure a high radiation power density.
微燃烧室的外表面必须产生一个高而均匀的温度分布，以尽可能高地输出辐射能。
Differential distribution of wall temperature in combustion chamber is founded in cylinders, and the lowest wall temperature is in cylinder No.
气缸盖各缸燃烧室壁面温度分布不同，其中三缸燃烧室壁面温度较低。
The property of the hybrid active silencer relies on the equivalent impedance at the secondary sound source position and the impedance distribution characteristics of the one-chamber pipe itself.
研究结果表明，复合有源消声器的消声效果取决于次级扬声器位置的等效声阻抗以及无源式消声管道本身的阻抗分布特性。
The thermal situation for the soaking chamber of CAPL. including heating characteristic. temperature distribution in the furnace and heat equilibrium. is introduced in this paper.
本文介绍某厂CAPL均热室热工工况，包括均热室的供热特点、炉内温度分布及热平衡。
A cloud chamber experiment is described, in which the angular distribution of secondary particles produced in nuclear interaction by high energy cosmic ray particles with paraffin has been studied.
本文描述一个利用云室研究高能宇宙线粒子与石蜡的核作用中次级粒子角分布的实验。
With the calculation and measuring experiment methods, the effect of vacuum chamber materials magnetic permeability on field distribution in a dipole magnet is discussed.
通过计算机模拟计算与实验相结合，讨论了真空盒磁导率对二极磁铁磁场分布的影响。
An investigation on dusted airflow distribution in gas chamber of multicyclone has been carried out by using the principle that the resistance of dusted airflow in it would keep equilibrium.
通过对多管旋风除尘器内气流阻力平衡分析，探讨多管旋风除尘器中各旋风子单体的气流分配状况，建立了气流分布计算模型，结合算例进行了分析。
The wave movement outside the chamber is calculated with the sour - ce-sink distribution method.
气室外的波浪运动采用源汇分布法进行计算。
A calculation of the wall temperature distribution in liquid propellant rocket engine chamber with milled grooves was completed by the aid of three-dimensional finite element method.
采用三维有限元模型对液体火箭发动机铣槽推力室进行了壁温分布计算。边界条件按一维经验公式处理。计算中比较了不同冷却剂流量。
And the velocity distribution of the suction chamber is analyzed.
并从吸入室的速度分布方面进行了分析。
A new die-casting die fit on cold chamber die casting machine was redesigned in the part of the center gate and floating flow-distribution.
分析了录音机芯飞轮压铸模的原设计失败的原因，重新设计了用于冷室压铸机的中心浇口、浮动分流的压铸模。
The hot working situation in the heating chamber of CAPL. including the way of heat supply. the heat equilibrium and the distribution of temperature, is introduced in this paper.
本文介绍CAPL加热变热工工况，包括加热室的供热方式、热平衡和温度分布。
A simulation method for fuel distribution and impinging in DID engine combustion chamber was proposed to realize 3-d visualization.
本文提出一种能够实现三维可视化的燃烧室内燃油分布和喷雾着壁特性计算的方法。
The condensed phase particle size distribution affects the combustion chamber and nozzle efficiency of solid rocket motors to some extent.
凝聚相微粒尺寸分布对固体火箭发动机燃烧室效率和喷管效率有影响。
Embodiments of the present invention are directed to a gas distribution system which distributes the gas more uniformly into a process chamber.
本发明的实施例关于一种气体分配系统，其可将气体均匀地分配至制程处理室。
This may be due to one more volatile substance as internal standard resulting in the rapid uniform distribution of samples partial pressure in the injection chamber.
这可能是由于双内标可使样品分压在进样室快速均匀分布所致。
The shape of the suction chamber decides the inlet velocity distribution of the compression grade in the multiphase pump, and affects the performance of the multiphase pump to a degree.
吸入室的形状决定了混输泵的压缩级进口的速度分布，对混输泵的性能有一定的影响。
New double conical grinding chamber design, make grinding beads in the conical chamber flow in a linear way, enable distribution to be more uniform.
新式双锥型研磨腔体设计，可使研磨珠自动往返运动，确保研磨珠分布更均匀。
The flow patterns in blast chamber and the main reasons for non-uniform air distribution in regenerator are discussed. The uniform blast theory and uniform cold air blast technology are introduced.
阐述热风炉鼓风室内气流的流动规律，论述气流分布不均的主要原因，介绍均匀配气原理和冷风均匀配气技术。
The upper supply and bottom exhaust air distribution is formed in painting polluting area with local plenum chamber and slot outlets.
利用局部静压箱和条缝型百叶排风口在污染控制区形成上送风下排风的气流组织形式。
Chengdu is the most significant commodity gathering and distribution place in the western China and is the production area of paint-spray and paint-baking chamber.
成都是西部最重要的商品集散地和喷漆、烤漆房产品的生产地。
应用推荐