Test results show lower exit average total pressure recovery, larger circumferential total pressure distortion and stronger and more irregular secondary flow.
试验表明其出口平均总压恢复系数较低，周向总压畸变指数较大，旋流较强且很不规则。
Distortion of optical system makes focal length of advanced fire control dynamic performance test system different at different FOVs, and influences angle-measuring precision.
在先进的火炮动态性能测试系统中，光学系统固有的畸变使得不同视场下的实际焦距不同，间接地影响系统的测角精度。
So it becomes one of the key techniques on dynamic control for settlement distortion that how to back-analyze parameters of ground in time base on field test data.
因此，如何及时根据施工现场实测沉降资料反分析地基土参数来预测后期沉降，已成为沉降变形动态控制的关键技术之一。
The method of analysis frequency table is using the meter of frequency table to test all kinds of frequency and then calculate the distortion of the wave.
频谱分析法是用频率分析仪测量各次谐波的方法计算出波形失真度，但采用此种方法的仪器价格较昂贵。
The relation between the resilience and the distortion can be found out and the data of the resilience hysteretic loop can be obtained by means of load test of the steel wire isolator.
通过对钢丝绳隔振器的加载试验，可以了解隔振器的恢复力与变形的关系，同时获取恢复力迟滞迴线的数据。
Using this model the permanent distortion and work life in long term under thermal cycling can be predicted based on a few test data.
利用该模型，根据少量试验数据可预示长期冷热循环下的永久变形或工作寿命。
The results of test showed that vibratory submerged arc welding can reduce residual stress and distortion notably and make the grains fine.
试验结果表明，振动埋弧焊工艺能有效地降低焊接残余应力和变形，并细化晶粒。
These are called "distortion products" and happen at multiples of the fundamental test tone.
这些称“畸变产品”并且发生在根本测试口气的倍数。
In this paper, an apparatus for distortion intensive measurement of casting is designed to test the distortion resistance of several kind of casting materials.
设计了铸件变形强化测试装置，测定了几种不同材质的铸件抗变形能力。
Specification and span can be set. Touch screen displays test time, distortion angle and etc on real time. And printer can print the testing data.
可设定规格、跨距，在触控屏上实时显示实测挠度、试验时间、受力弯曲角度、变形角度，并可由打印机打印出测试数据。
Finally use the dynamic three axle shear test to research impulsive load function under red clay mechanics and distortion characteristic.
最后通过动力三轴试验仪研究冲击荷载作用下红粘土的力学和变形特性。
Winding distortion may happen during transformer operation. Frequency response and short impedance are the main methods to test winding distortion.
变压器在运行中可能发生绕组变形，测试绕组变形的方法主要有频响法和短路阻抗法。
This paper studied mainly multi-T joint test data. By analysis test data, gave experience equation for transverse distortion of T-joint welding structure.
本文重点分析了多个T形接头焊接的工艺试验结果，通过对试验数据的分析，得出了对T形接头焊接构件的横向变形的经验公式。
The test results shows that it have a good performance of anti-data cutting and adding, anti-data distortion and anti data fusion.
试验表明，该方法可以抵抗一定程度的数据增减和失真攻击，以及数据融合。
Based on the present method of distortion handling, this paper attempts to develop the test technique of a series of distorted model.
本文试图在现行畸变处理方法基础上提出系列畸变模型试验技术。
Through measuring deflection and strain of test girders under loading, performances of this type of box girder, including bending, torsion and distortion are analyzed.
通过测试模型梁在静力荷载作用下的挠度和应变，来分析这种箱梁结构的弯曲、扭转和畸变等力学特性。
Test results show that the nonlinearity distortion of the testing method is smaller than 5?%.
测试结果表明：该检测方法的非线性可以控制在5%以内。
The experimental results of the thermal recovery of the wavefront distortion using the single segment amplifier (SSA) test bed and the Hatamann wavefront sensor are reported.
给出了在单口径片状放大器（SSA）实验平台上利用哈特曼波前传感器进行热恢复研究的实验结果。
Methods All subjects were tested"PASS"through distortion-product otoacoustic emission (DPOAE), then the behavior acoustic test was made.
方法采用行为测听和耳声发射相结合的方法测听。
Methods All subjects were tested"PASS"through distortion-product otoacoustic emission (DPOAE), then the behavior acoustic test was made.
方法采用行为测听和耳声发射相结合的方法测听。
应用推荐