The specified printer or disk device has been paused.
已暂停指定的打印机或磁盘设备。
Optical disk device, semiconductor device, optical disk and recording method.
光盘装置，半导体器件，光盘及记录方法。
Pass the command the name of the disk device to which you want to install it—typically, /dev/sda or /dev/hda.
将想要安装的磁盘设备名传递给命令 — 通常是 /dev/sda 或 /dev/hda。
Finally, the devices whitelist cgroup is preventing us from creating a disk device, as well as mounting it if it exists (as it does through /mnt).
最后，设备白名单 cgroup防止我们创建磁盘设备，或在它存在的情况下装载它（因为这需要通过 /mnt 来完成）。
Throughout this article, I assume that you have already added a new hard disk device, or have a spare disk device or partition to use as the destination for the directory or file system.
在本文中，假设您已经添加了一个新的硬盘设备或具有备用的硬盘设备或分区，以用作目录或文件系统的移动目标。
In order to improve the clutch disk device, in particular with regard to its torsional vibration damping capacity, the receptacle for the fixing element in the side disk opens radially outwards.
为了对离合器盘装置尤其是在其扭转振动阻尼容量方面进行改进，该侧盘中的、用于所述固定元件的接收部径向向外敞开。
With database managed space (DMS) and raw device, we can decrease the time to fail over the disk resources, because there will be no checking of disks during failover.
通过数据库管理的空间(DMS)和原始设备，我们可以减少磁盘资源的故障转移时间，因为在故障转移时将不会进行磁盘检查。
From this base, you can backup the information further using whatever techniques you prefer, including copying to another machine or device, or by copying to tape or disk.
基于这一点，您可以使用自己喜欢的方法进一步地对这些信息进行备份，包括将其复制到另一台计算机或设备，或复制到磁带或磁盘。
While one script is being loaded from disk or waiting for a hardware device to start, another script can be running to start another service.
当从磁盘上加载一个脚本或等待硬件设备启动的同时，可以运行另一个脚本来启动另外一个服务。
In practice, buffering may occur at various other levels, such as on the hard disk itself, the controller, or the kernel disk drive device driver, so ours may not make much of a difference.
实际上，缓冲可能发生在其它不同的级别，例如硬盘本身、控制器或内核磁盘驱动设备驱动程序，所以我们的工作可能对性能影响不大。
The concept behind Software RAID is simple — it allows you to combine two or more block devices (usually disk partitions) into a single RAID device.
软件RAID的概念很简单——使您可以将两个或多个块设备(通常是磁盘分区)组合为单个RAID设备。
The server will need to be rebooted after the update process, so make sure the bootlist is showing the target alternate disk as the first boot device (as seen in Listing 7).
服务器需要在更新过程完成后重新启动，所以要保证启动列表显示目标备用磁盘作为启动设备（如清单 7 所示）。
In addition, XFS allows the journal to be stored on another block device, such as a partition on another disk.
另外，XFS允许将日志存储在另一个块设备上，例如，另一个磁盘上的一个分区。
The copied disk is used for system recovery; therefore, removing or reconfiguring network or device configuration information is not necessary.
复制的磁盘用于系统恢复；因此，不需要删除或重新配置网络或设备配置信息。
The benefits of virtual SCSI devices are much the same as virtual disk; less hardware expense and not needing to dedicate a device to each partition.
虚拟scsi设备的好处与虚拟磁盘几乎相同；更少的硬件费用，不需要为每个分区专门配置设备。
MTD_CHAR provides raw character access to the flash, while MTD_BLOCK projects the flash as a normal block device (like an ide disk), on which a filesystem can be created.
MTD_CHAR提供对闪存的原始字符访问，而MTD_BLOCK将闪存设计为可以在上面创建文件系统的常规块设备(象ide磁盘)。
An alternative strategy is to use disk mirroring to mirror the log device.
此方法的一个替代策略是使用磁盘镜像来对日志设备进行镜像。
The disk and network device commonly map into the machine's physical disk and network device (as shown in Figure 2).
磁盘和网络设备通常映射到机器的物理磁盘和网络设备（如图 2 所示）。
I also made sure that any active dump device on this disk was removed.
确保这个磁盘上的所有活动的转储设备均已删除。
A target device could be a hard disk or a disk array system.
目标设备可以是硬盘或磁盘阵列系统。
Your boot device is the cartridge disk controller (DP), which you associate with the external file from the software kit (iu6_dp0.dsk).
引导设备是盒式磁盘控制器 (DP)，您可以将其与来自软件工具包的外部文件 (iu6_dp0.dsk) 关联。
Actually, when you configure a disk as a common paging space device the no_reserve attribute will automatically be set no.
实际上，在把磁盘配置为共用分页空间设备时，保留策略属性会自动地设置为no_reserve。
A Linux filesystem contains files that are arranged on a disk or other block storage device in directories.
Linux文件系统包含排列在磁盘或其他区块存储设备的目录中的文件。
As you can see, the disk label tells the servers that your file image is a sda1 device.
如您所见，磁盘标签告诉服务器您的文件映像是sda1设备。
Begin by creating a new disk image and representing it as a device with losetup.
首先创建新的磁盘映像并通过losetup将其表示为设备。
The cannot mount rootfs error always happens when your system tries to switch the initrd root file system to the real root file system disk with the device name in this configuration.
当系统尝试将initrd根文件系统切换到拥有此配置中的设备名称的实际根文件系统磁盘时，经常会出现can notmount rootfs错误。
First, we must remove the device mappings for the DS8300 disk from the DS8300 VIOS (hvio1 and 2).
首先，我们必须从ds8300VIOS (hvio1和hvio2)删除DS8300磁盘的设备映射。
The first layer of defense is that queries to the database always include the file type and mode bits from the real file on disk, not just the device and inode.
第一层防御是在数据库的查询中总是包含文件类型和来自磁盘上实际文件的模式位 (mode bits)，而不只包含文件的设备和inode 号。
Using the disk model, DRBD exports a special device (/dev/drbdX) that you can use just like a regular disk.
使用磁盘模式，DRBD输出一个特殊设备（/dev/drbdX），您可以像使用一个普通磁盘那样使用它。
When the cluster service on the forming node starts, it first tries to bring online the physical device designated as quorum disk.
当集群服务开始建立节点，它首先将指定为Quoru m盘的物理设备上线。
应用推荐