According to the feature of the diesel digital speed control system, a FLC algorithm is (developed) and realized in the diesel speed control system based on the 16-bit embedded microcontroller.
针对柴油机数字式电子调速器的特点，设计了一种转速模糊控制算法，并在以16位嵌入式单片机为核心的柴油机数字调速系统中实现了这种算法。
The whole control system is digital integration, the speed of all kinds of protective actions is fast, the fault rate of the complete machine is low and the lifetime is long.
整个控制系统均为数字集成化，各种保护动作速度快，整机的故障率低，寿命长。
This paper deals with a closed-loop digital control for a hydraulic valve, controlled motor speed system.
研究了用位总线微机构成的液压阀控马达速度闭环数字控制系统。
Based on vector control theory, a fully digital variable speed system is designed.
基于矢量控制理论设计了一套全数字变频调速系统。
The special DSP chip for industrial control, integrated A/D and PWM interface increase the speed and reliability of the digital control system.
采用工业控制专用的DSP芯片、集成的A/D和数字PWM控制输出接口，提高了数字控制器的速度和可靠性；
Based on vector control theory, a full digital variable speed system is designed. The system structure and method for designing the software and hardware are introduced.
基于矢量控制理论设计了一套全数字变频调速系统，介绍了系统结构及软硬件设计方案。
This system USES photoelectric coder as speed detecting sensor, USES PID digital controller as control method, USES PWM signal as control output to regulate speed.
该系统采用光电编码器作为速度检测传感器，控制方式采用PID数字控制，控制输出采用PWM数字信号至驱动电路对电机调速。
And the high-speed digital signal processor (DSP) can deal with the complicated control algorithm, and suit for the velocity modulation system that create the high performance.
而数字信号处理器(DSP)运算速度快，能够完成复杂的控制算法，适合于建立高性能的调速系统。
Automation: Microprocessor controlled optical bench, digital speed control, automatic gain selection, advanced system check, automatic power saving mode.
自动化：微处理器控制光学台，数字化动镜控制，自动增益选择，高级的系统诊断，自动节电模式。
At present, with the use of digital control system, active power filter becomes the most suitable for active power filter, for its flexibility, speed and high reliability features.
目前，采用数字控制系统的有源电力滤波器以其灵活性、快速性和高高可靠性的特点，成为最适宜的有源电力滤波器。
To improve BLDCM control result, this paper establishes a full digital double closed loop system which USES microprocessor-TMS320LF2407A to control the communication and speed of BLDCM.
为了提高无刷直流电机的控制效果，运用TMS320 LF 2407 A芯片，建立了无刷直流电机全数字双闭环控制系统，给出了硬件电路设计和部分软件编制方法。
YAG laser marking machine, adopts digital control system which is high speed , and high precision .
YAG激光打标机，采用数字控制系统，具有高速度、高精度的特点。
A rotor flux oriented control scheme is implemented in a digital signal processor system to demonstrate the robustness of the speed estimation to parameter variations.
在数字信号处理器系统演示的速度估计的稳健性参数变化的转子磁场定向控制计划的实施。
A simple practical and reliable digital remote control system is introduced which is suitable for remote control of discrete objects with moderate speed and data capacity.
本文介绍了一种简单实用的数字式遥控系统，该系统适用于对速度不高、容量不大的分散目标实现遥控。
The high-speed digital signal processing can complete the complicated the algorithm of control, and suit for the velocity modulation system that create the high performance.
数字信号处理器运行速度快，能够完成复杂的控制算法，适合于建立高性能的调速系统。
The all-digital ac frequency conversion control system based on the common DC bus can meet the requirements of high speed and high reliable control performance of the high-speed paper machine.
这种基于公共直流母线的全数字交流变频控制系统适用于高速纸机的高速度、高可靠性控制性能的需要。
This article analyzed digital potentiometer structure and its performance and found it could be used to form the current loop in the wind speed control system.
通过对数字电位器的结构及性能分析，发现它能够实现风速控制系统中电流环功能。
Base on the analysis and research of the original control system of double housing planer (B2012A), according to its special technics, designed a digital direct current speed control system.
在分析和研究龙门刨床(B2012A)原控制系统的基础上，根据厂方现场生产工艺的特殊要求，设计了龙门刨床全数字直流调速系统。
In control system, system identification and control are calculated by high speed digital signal processing board.
实时控制中，辨识和控制的计算都由高速数字信号处理器完成。
The system has digital control attenuator, high linear IF magnifier, I/Q channels, high speed A/D converters and wide measurement gate.
系统采用数控衰减、高线性度中放和I、Q正交双通道，具有较高的采样率和较宽的测量波门。
Digital AC-Servo control system is used to increase speed stability, adjust-ranges, automatization, measurement-precision, at the same time the system has some self-diagnose functions.
采用数字式交流伺服控制系统控制动横梁速度，使系统额速度稳定性、调节范围、自动化程度和测量精度都有大幅的提高，且具有一定的自诊断功能。
This paper introduces rebuilding electric control system of portal crane drived by DC and the application of digital DC speed controller, PLC and touchable industrial graphic monitoring system.
简要介绍直流驱动的门机电控系统改造，包括数字式直流调速器、PLC和触摸式工业图形监控系统的应用。
Microprocessor controlled optical bench, digital speed control, automatic gain selection, and dynamic resolution enhancement, advanced system check.
自动化：微处理器控制光学台，数字化动镜控制，自动增益选择，动态分辨率增强，高级的系统诊断，校正滤波器。
The application of PLC in speed adjustment of fin stabilizer is introduced in this paper. This system USES PLC as the central device to achieve digital control of sensitivity adjustment of speed.
介绍了PLC在减摇鳍装置航速调节中的应用，以PLC为控制核心实现装置的航速灵敏度调节的数字化处理。
A method of digital PID is used in precise parallel robot for fiber alignment firstly. This new control method and control system is introduced in high speed and high precise parallel robot.
首次把数字PID算法应用到面向光纤作业的精密并联机器人控制中，介绍了这种高速、高精度小型并联机构控制系统的新控制算法及系统研究情况。
Take the designed sample BSRM of 12/8 structure as control object, hardware of high-speed digital control system is preliminary designed, including power converter and control system.
以设计的12/8结构样机为控制对象，对磁悬浮开关磁阻电机高速数字 控制系统进行了硬件原理设计，包括功率变换器和 控制系统设计。
Finally, the technologic experiment of twin-wire welding was done with the equipment of twin-wire pulsed MAG high speed welding power supply and its multi-phase digital synchronic control system.
应用所研制的双丝脉冲mag高速焊多相位数字化协同控制电源装备进行了大量的双丝高速焊工艺试验。
Finally, the technologic experiment of twin-wire welding was done with the equipment of twin-wire pulsed MAG high speed welding power supply and its multi-phase digital synchronic control system.
应用所研制的双丝脉冲mag高速焊多相位数字化协同控制电源装备进行了大量的双丝高速焊工艺试验。
应用推荐