This paper Introduces traditional method of fault tree analysis briefly. and discusses digital simulation method of mechanical fuse fault tree quantitative analysis.
介绍了故障树分析的传统方法，着重讨论了机械引信故障树定量分析的数字仿真方法。
Based on switch function model of TCSC and MATLAB, the digital simulation method in researching zero-crossing point characteristic of the capacitor voltage is put forward.
该文基于TCSC的开关函数模型并借助MATLAB仿真工具，提出了研究电容电压过零点特性的数字仿真方法。
The theories of the branch addition cyclic voltammetry for reversible, quasi-reversible and irreversible processes at the planar electrode were deduced with digital simulation method.
本文用固定电极电容电流理论对分支加和循环伏安法消除电容电流影响的原理作了说明；
The two major factors impacted the reconstructed results of incomplete projection data: reconstructed methods and the projection interval angle are analyzed by digital simulation method.
通过数值模拟分析了影响残缺投影数据重建结果的主要因素：重建算法和投影间隔角。
Based on the comprehensive load model considering the distribution network as the research object, by digital simulation method, and the load model for an in-depth study of the simulation.
本文以考虑配电网络综合负荷模型作为研究对象，采用数字仿真方法，对该负荷模型进行了较为深入的仿真研究。
By digital simulation, the Ac carried wave system and its equivalent Dc system are checked and the feasibility of Dc method equivalent to the Ac carrier wave system is verified.
通过数字仿真，比较了交流载波系统和其等效直流系统，验证了交流载波系统等效直流方法的可行性。
A new infrared digital guiding method is used. AGV's motion guiding and controlling simulation in free path are completed by using single chip microcomputer.
利用红外数字导引新方法，使用单片微型计算机，对自由路径AGV的导引和运动控制进行了模拟仿真。
The model and method for estimating circuit design reliability by using digital simulation are established. A simulation example of the typical fuze circuit is given in this paper.
给出了设计可靠性的建模方法和用数字仿真评估设计可靠性的模型方法和仿真过程并给出了一个典型电路的仿真实例。
For a typical assembly stress problem, digital simulation is conducted by means of the hybrid method with different numerical calculation methods.
针对一个典型的装配应力问题，运用不同的数值计算方法，对混合求解法进行了数值模拟。
A system simulation study was done for full digital welding inverter, and a method of connecting dynamic arc load model to the system with controlled source was presented.
从整体上对数字控制逆变焊机系统进行了仿真研究，提出用受控源的方法实现了动态电弧负载模型与系统的连接。
Adopt single some earth, multipoint earthing, mix earth, simulation circuit earth, digital circuit earth introduce PCB printed circuit board earth mentality of designing, design method, skill.
并通过单点接地、多点接地、混合接地、模拟电路接地、数字电路接地介绍了P CB印刷电路板接地的设计思路、设计方法与技巧。
Using this method the PSS is designed for a single machine-infinite bus system, and the results of digital simulation show that this method is very effective and useful.
作为实例设计了单机——无穷大系统中机组PSS的参数，计算机数字仿真表明，本方法设计效果良好。
The method was developed for the matrix determination and the component analysis by the character line in Ni-based alloy based on digital simulation.
在镍基合金可见光谱计算机模拟基础上，研究利用镍元素及成分元素特征谱线进行基体鉴别和成分元素分析的方法。
A method for acoustic signal storage and simulation of underwater target is presented in this paper. The techniques of large dynamic pulse gain control and digital waveform storage are applied.
本文提出了一种利用大动态范围脉冲幅度自动增益控制技术和数字波形存储技术，实现水下目标信号存储和目标回波波形模拟的方法。
Comparisons with digital simulation show that the method is superior to other approximate methods which have been applied to random response of hysteretic systems.
解析结果与数字模拟结果比较表明，该方法优于迄今为止用于双线性迟滞系统随机响应分析的其他近似方法。
Computer simulation method is used to study the performance of digital compensation technique. Three compensation methods are compared using scattered clutter model.
本文采用计算机模拟的方法，利用分布式杂波模型对雷达发射信号不稳定数字补偿技术进行了研究。
In the past twenty years, people have studied extensively and proposed several effective verification methods for sequential behaviors of digital circuits, such as simulation method and formal method.
在过去的二十几年中，人们对于数字电路顺序行为的验证进行了深入的研究并提出了许多行之有效的验证方法，例如，模拟的方法和形式化的方法等。
The comparison with digital simulation for given examples shows that the method yields satisfactory approximate results.
与数字模拟结果的比较表明，该方法给出令人满意的结果。
IIR the design of the digital filter method is to use the filter mature theory and simulation design charts for design, so keep some classic simulation filter excellent range characteristics.
IIR数字滤波器的设计方法是利用模拟滤波器成熟的理论及设计图表进行设计的，因而保留了一些经典模拟滤波器优良的幅度特性。
Secondly it was widely adopted that the advanced three-dimensional entity digital design method, virtual prototype technique and digital simulation technique in the processing of design.
在设计过程中，广泛采用先进的三维实体数字化设计技术、虚拟样机技术和数字仿真技术。
With the software, CATIA, the rationality of the method on Tri-Dimensional digital modeling, simulation and analysis is verified by the example of the depot of magnetic levitation train.
本文借助CATIA软件，结合磁悬浮列车动车段工程实例验证了工程设计的三维建模与仿真理论的合理性。
The results of the study show that to use micro-computer is a very ideal and reliable method for dynamic test, model identification, digital simulation and aided debugging of the electro-hydraulic$…
实践表明，用微机对电液控制系统的动态测试、模型辨识、数字仿真以及辅助调试是一种理想、可靠的方法。
Based on the method of all-coefficient adaptive control, the paper gives the design of the tracking and pointing control system of antenna on satellite and the study of its digital simulation.
根据全系数自适应控制的原理，进行了卫星天线跟踪指向控制系统的设计和数学仿真研究。
By the test in the results of simulation or digital design, the results show that compared with traditional methods, this presented method has higher efficiency.
通过对仿真和数字化设计模型数据进行检验，结果表明，采用此方法比传统方法更有效。
The results of the digital simulation show that the method can identify fault current and energizing inrush current precisely and makes it rapid and reliable for the protective relay to …
数字仿真结果表明，本方法可准确识别故障电流和励磁涌流，即使在空载合闸于内部故障时，保护继电器也能迅速可靠动作，避免了采用二次谐波制动导致的误动问题。
Flight schedule simulation research means a method which can obtain the operating results of the indicators through the digital simulation of plans which are already scheduled.
航班计划模拟研究是指利用计算机技术，对已拟定的航班计划进行数字化地运营模拟，从而获得有关经营结果的各项指标的一种研究方法。
The invention discloses a simulation method for shallow field depth of a digital image. The method includes the following steps: a shooting device is provided and focuses on a main body;
一种数字图像的浅景深模拟方法，包括步骤如下：提供一拍摄装置，该拍摄装置对一主体进行对焦；
Based on a detailed study of the FPGA, using distributed algorithm FIR digital filter method and the principle, and through the Xilinx ISE under the Modelsim simulation.
详细研究了基于FPGA、采用分布式算法实现FIR数字滤波器的原理和方法，并通过XilinxISE在Models im下进行了仿真。
The method of Total Digital Timing with its high-performance is replacing the technology of Simulation controlling.
全数字调速以其较高的性能指标，正逐渐取代模拟控制技术。
This paper provides the method of mathematical modeling of a boiler and the method of digital simulation for the training power plants. The basis is also provided for the analysis and desi...
本文为模拟培训电站提供了建立锅炉数学模型和数字仿真的方法，为电站锅炉及其控制系统的分析和设计提供了技术依据。
应用推荐