Using the resolver - to - digital converter a a multi channel Angle measuring system.
利用轴角-数字转换芯片a和旋转变压器,可以组成高精度的多通道测角系统。
Using the resolver-to-digital converter AD2S82A, design a multi channel angle measuring system.
利用轴角-数字转换芯片AD2S82A和旋转变压器,可以组成高精度的多通道测角系统。
Using the resolver-to-digital converter AD2S82A, designed a multi channel angle measuring system.
利用轴角-数字转换芯片AD2S82A和旋转变压器,可以组成高精度的多通道测角系统。
A signal processor (108) operably coupled to the analogue to digital converter (370) processes the digital received signal.
可操作的连接到模拟到数字转换器(370)的信号处理器(108)处理数字接收信号。
The converter has a good tradeoff between conversion speed and conversion precision. It is a 1.5-bit per stage with 9 stage and digital correction technique.
本设计为兼顾模数转换器的速度和精度,采用数字校正技术,以每级1.5 位的9 级流水线结构实现。
Often, the required output signal is another analog output signal, which requires a digital to analog converter.
通常,要求的输出信号为另一个模拟输出信号,这就需要数模转换器。
As a special interface connected with analog and digital circuits, high performance analog-to-digital converter is much more important in whole system design.
作为模拟电路与数字电路的接口电路,高性能的模数转换器对整个设计系统的实现非常重要。
The design of hardware module includes A/D converter, DDC (Digital Down Converter) and DSP. The design and application of AD6640 and AD6624 are fully discussed in this part.
模块的硬件设计主要包括:A/D转换器、数字下变频器(DDC)以及DSP,详尽讨论了A/D 器件AD6640和DDC 器件AD6624的设计和应用;
The converter USES a high order MASH noise shaping technique and a digital decimation filtering part consisting of comb filters and cascade of half band filters.
该转换器采用了高阶MASH噪声成形技术,而其数字抽取滤波部分则由梳状滤波器与级联的半带滤波器构成。
A new approach of digital scan converter for medical ultrasonic imaging system is proposed.
提出了用于医用超声成像系统的一种数字化扫描变换器的新方案。
This paper describes an AC frequency conversion servo system which is composed of single chip and converter and designs a digital PID adjuster.
介绍了应用单片机和变频器组成的数字式变频交流伺服系统及数字PID调节器设计。
Analog music is converted to a digital signal via an analog-to-digital converter.
模拟音乐通过模拟数码转换器转换为数码信号。
It consists of a digital controller, SRAM for display data memory, a DC-DC voltage converter, reference current generators, a pre-charge voltage generator, 64 common drivers, and 132 segment drivers.
芯片内部主要包括数字控制器,显示数据存取器,DC - DC电压转换器,参考电流产生器,电压预充电路产生器,64个行驱动电路和132个列驱动电路。
For analog inputs, any absolute voltage value above which the analog-to - digital converter cannot distinguish a change. The overload value can be different for plus and minus inputs.
就模拟输入而言,使模数转换器不能区别其变化的超范围的绝对电压值。超载值对于正输入和负输入可能不同。
Using the HS1100/HS1101 capacitive humidity cell and the A/D converter CC7107 etc, this article designed a low cost and digital-displayed humidity measurer.
采用湿敏元件HS1100/HS1101以及A/D转换器CC7107等常用元器件,设计了一款电路结构简单而且成本低廉的数字显示湿度测量仪。
This paper presents the composition and the principle of optical fibre liquidometer. It is composed of analog—to—digital converter, a pair of optical fibres and digital display circuit.
本文对光纤液位计的组成和原理作了介绍,光纤液位计由模数转换装置、光导纤维对及逻辑数字显示电路组成。
The 14-bit, four-channel A/D converter MAX1325 is employed to sample the analog input and output voltage of the synchro and then converted them into digital.
模数转换采用了14位,四通道A/D转换器MAX1325,实现了自整角机四路模拟数据的同时、快速采样。
The basic concept and architecture of software radio is introduced in this paper. And a type of software radio receiver based on programmable digital down converter (DDC) -hsp50214b is presented.
介绍了软件无线电的基本思想及结构,提出了一种基于可编程数字下变频器HSP50214B的中频软件无线电接收系统的设计方案。
It is a high performance digital controller, which possesses a high resolution digital trigger, high precision synchronous interrupt pulses, and a high precision fast A/D converter.
系统内设计了高分辨率的数字触发器和高精度的同步中断脉冲以及高精度快速的A/D转换,实现了数字化高性能调节控制系统。
The principle and design method of a new design of a time-to-digital converter (TDC) implemented on an FPGA is presented.
介绍一种基于现场可编程门阵列(FPGA)的时数转换器(TDC)的原理及设计方法。
As a new true RMS-to-DC converter, AD536 is widely used in the field of the digital instrument and auto-control.
AD536作为一种新型的求有效值芯片,在数字仪表及自动控制领域有着广泛的应用。
To reduce the power dissipation and chip size of digital calibration circuits of pipelined analog-to-digital converter (ADC), a new statistics-based background calibration technique is presented.
为了降低流水线模数转换器中数字校准电路的规模和功耗,提出了一种新的基于信号统计规律的后台数字校准技术。
This thesis investigates the design and implementation of a full-digital matrix converter for PMSM drive systems.
本文旨在研制一套全数位化矩阵转换器驱动永磁同步电动机系统。
In this thesis, a digital control method is presented to improve the transient and steady-state responses of the buck power converter .
因此,本论文提出数位控制的方法来改善上述缺点,以提高降压型转换器的暂态与稳态性能。
Analog—to—digital converter is non—electrical transform. A pair of optical fibres can transmit signal to digital instrument to a great distance away.
模数转换装置为非电量转换,光导纤维对把该信息远距离传送给数字显示仪表,它能用数字量连续显示液位的变化。
FIG. 1 schematically illustrates the input stage of a switched capacitor analog to digital converter.
图1示意性地示出基于开关电容器的模数转换器的输入级。
The practice proves that the performances of GC5016 as a digital up-converter meet the requirements of TD system.
实践证明,GC 5016作为数字上变频器性能满足TD系统的要求。
This paper describes the design and analysis of a fully differential, gain-enhanced CMOS telescopic operational transconductance amplifier (OTA) used in a pipeline analog-to-digital converter (ADC).
提出了一种应用于流水线型模数转换器(adc)的增益提高型套筒式全差分跨导放大器(OTA)的设计与分析方法。
The DSP, Digital Up Converter ( DUC ) and Digital Down Converter (DDC ) are key technology of a hardware-platform.
DSP和数字上变频和下变频技术是构建高频雷达通用硬件平台的关键技术。
The DSP, Digital Up Converter ( DUC ) and Digital Down Converter (DDC ) are key technology of a hardware-platform.
DSP和数字上变频和下变频技术是构建高频雷达通用硬件平台的关键技术。
应用推荐