The crystal structure was determined with four-circle diffractometer.
用四圆衍射仪测定了晶体结构。
The products after ignition were examined through X-ray diffractometer.
用X衍射仪测定了点火后的生成物。
The crystalline property of granular resistant starch(RS) was studied by X-ray diffractometer.
采用X-射线衍射仪对颗粒态抗性淀粉的结晶性质进行了研究。
It was characterized by optical microscope, SEM, IR, DSC and X-rays diffractometer respectively.
采用光学显微镜、SEM、IR、DSC和X射线衍射等多种手段对其进行表征。
The Principle of X-ray diffractometer method of macrostress measurement is described in this Paper.
本文叙述了使用X射线衍射仪法测量宏观应力的原理。
The copolymer was confirmed by means of Infrared spectroscopy, Microscope and X-ray diffractometer.
利用红外光谱、显微镜和X -射线衍射等手段对产物进行了结构和性能表征。
The microstructure of the coating is analysed with metallographic microscope and X ray diffractometer.
用金相显微镜和X射线衍射仪分析涂层的显微组织。
Result for X-ray diffractometer test indicates that no oxidization occurred during the spraying process.
射线衍射分析结果表明冷喷涂过程中，无氧化现象发生。
The products were well-characterized by X-ray diffractometer (XRD) and scanning electron microscope (SEM).
所得产物用X射线衍射仪(XRD)和扫描电子显微镜(SEM)进行了表征。
The implanted samples were analyzed using X ray diffractometer (XRD) and X ray photoelectron spectrometer (XPS).
注入后的样品用X射线衍射方法(XRD)以及光电子能谱方法(XPS)进行分析。
The phase and the microstructure of the products were analysed by X-ray diffractometer and scanning electron microscope.
使用X射线衍射仪分析了产物的相结构，采用扫描电子显微镜观察了粉体颗粒形貌。
The microstructures and compositions of the composites were analyzed by scanning electron microscopy and X-ray diffractometer.
利用扫描电镜和X射线衍射仪分析了复合材料微观结构和组成成分的变化。
The mesomorphic behavior of these polymers was characterized by a polarizing microscope, a DSC instrument and a X-ray diffractometer.
共聚物的液晶性用偏光显微镜、DSC和X射线衍射进行了表征。
The product was analyzed by using X-ray diffractometer and electronic microscope and the dispersity in organic solvents was determined.
对产品进行了X-射线衍射和电镜分析，并检测了在有机溶剂中的分散性。
Five crystal structures are determined by CCD diffractometer after the single crystals were grown by slow evaporation at room temperature.
用溶剂自然挥发法培养了五个单晶，并采用CCD 单晶衍射仪测定了它们的晶体结构。
The tungsten oxide films by two methods were characterized by atomic force microscope, double-beam UV-VIS-NIR spectrophotometer and X-diffractometer.
本文分别用原子力显微镜、双束紫外可见分光光度计、X-衍射仪等表征了用以上两种方法制备的三氧化钨薄膜。
Analysis and removal of the troubles in cooling water system of VD_1A X_ray diffractometer were introduced in this paper with an example demonstration.
介绍了岛津vd_1a型X射线衍射仪冷却循环水系统的故障分析及排除方法。
The microstructure of the alloy as well as morphology and distribution of carbides were examined by using light microscope, SEM and X-ray diffractometer.
采用光学显微镜，扫描电子显微镜及X光衍射研究了合金的显微组织、碳化物形态及分布。
The hardness gradient, depth, microstructure and phases of nitrided layers were measured with Microhardness Apparatus, Microcopy and X-ray diffractometer.
利用显微硬度计、金相显微镜和X射线衍射仪测定了渗氮层的硬度梯度、层深、显微组织和相组成。
In this paper, a micro-computerized upgrading method for old model X-ray diffractometer, as well as its data collection and analysis system (XRDS) are recommended.
介绍一种旧型号的X射线衍射仪微机化的升级改造技术以及相应的数据采集与分析系统(XRDS)。
The morphology, composition and structure of the coating were investigated by scanning electron microscopy, energy dispersive spectrometer and X-ray diffractometer.
用扫描电镜、能谱仪和X射线衍射仪分别分析了涂层的形貌、化学成分和相组成。
This paper introduces a neutron diffractometer system with three detectors in which the microcomputer is applied to control Instruments, collect information and process data.
本系统介绍了用微型计算机进行运行控制和信息采集及处理的三探头中子粉末衍射仪系统。
The holistic design and hardware components of data acquisition system for high resolution powder diffractometer based on China Advanced Research Reactor (CARR) were introduced.
介绍了中国先进研究堆(CARR)旁高分辨粉末衍射仪数据采集系统的整体设计和硬件组成，阐述了各单元电路的结构和设计。
The microstructure and properties of the composite coatings were investigated by optical microscopy, X-ray diffractometer, electron probe microanalyzer and a skimming wear machine.
利用金相显微镜、X射线衍射仪、电子探针及滑动磨损试验机，研究了合金熔覆层的显微组织及性能。
This paper introduces X-ray diffractometer application of petroleum geology and petroleum project in Jiangsu oilfield, and geological meaning of petroleum exploration and production.
介绍了X射线衍射仪在江苏油田石油地质、石油工程的应用以及对石油勘探和开发的地质意义。
The microstructure of carbon fibers has been studied using X-ray diffractometer (XRD), transmission electron microscope (TEM) and high-resolution transmission electron microscope (HRTEM).
利用X射线衍射(XRD)、透射电子显微镜(TEM)、高分辨电子显微镜(H RTEM)研究了碳纤维的微观结构。
Macro examination, metallographic microscope, microhardness tester and X ray diffractometer were utilized to study the failure reasons for connecting rode bearing bush of automobile engine.
采用宏微观检验、显微硬度测定、X射线衍射等方法对汽车发动机连杆轴瓦的失效进行了分析。
X-ray diffractometer, scanning electron microscopy and the Archimedes method et al. were used to investigate the phase composition, the microstructure, the density and so on of MgB2 samples.
利用X射线衍射仪、扫描电子显微镜和阿基米德方法等，分别研究了样品的物相组成、显微结构和密度等。
The effect of Si on the crystal lattice parameters, lattice volume and crystal defects of the eutectic cementite in malleable cast iron has been studied by using X ray diffractometer and TEM.
采用X-射线衍射仪、透射电镜研究了可锻铸铁白口组织中硅对共晶渗碳体点阵参数、晶胞体积及晶体缺陷的影响。
Effect of reaction of rare earth to oxygen on catalysis effect in plasma nitriding process catalyzed by rare earth has been studied with X-ray diffractometer and scanning electron microscopy.
利用X射线衍射仪和扫描电镜研究了稀土催渗离子渗氮过程中，稀土与氧之间的作用对催渗效果的影响。
应用推荐