The application showed that the die structure is reasonable and the performance is reliable.
实践证明：该模具结构合理，性能可靠。
Practical application showed that the die structure could meet the requirement for the products accuracy and greatly enhance the production efficiency.
实践证明，模具结构能很好地满足产品压合后的精度要求，同时极大地提高了生产效率。
Practice shows that the die structure is clear and reliable and can ensure the product quality. The design is an important reference to the kind of parts.
实践证明：该模具结构可靠，能保证产品质量，对此类零件的级进模设计有重要参考价值。
The die structure proved to be simple with better production quality and high productivity. The result is valuable for products of the same kind, even with the same process.
该模具结构较为简单，加工质量好，生产率高，对同类产品乃至相同工艺的各种电子电器产品的加工具有参考价值。
Practices show that the die structure is reliable and can ensure the product quality. It has important reference value to the design of the progressive dies for this kind of parts.
实践证明，该模具结构可靠，能保证产品质量，对此类零件的级进模设计有重要参考价值。
The design of die structure was also stated.
阐述了该模具的结构设计。
The die structure on the hydraulic die hammer was introduced.
介绍了液压模锻锤上的模具结构。
Upper ejector rod was added in the die structure for ease of workpiece separation.
在模具结构中增加了上项杆(上打料棒)，便于工件脱离。
Practice has proved, the die structure design is reasonable, later maintenance convenient.
实践证明，该模具结构设计合理，后期维护方便。
A practical die structure and the process for die casting squirrel cage rotor are presented.
给出了压铸鼠笼转子的实用模具结构和压铸工艺，论述了模具的设计要点。
The key points of the technology, die structure and its application were elaborated systemically.
对工艺要点、模具结构及应用进行了系统阐述。
Further, die structure and working process, as well as critical parts design are mainly introduced.
重点介绍了模具结构和工作过程及重要零件的设计。
The design analysis and die structure of typical common punching die of button contact are introduced.
介绍了一副典型的普通触指冲落模的设计分析和模具结构。
Such fine blanking process simplifies die structure, easy to make and to install, and also has low cost.
这种精冲方法，模具结构简单，易于制造和安装，成本低。
According to the parts demand in quantity and structure characters, its process and die structure are analyzed.
根据零件的需求量及结构特点，对其工艺、模具结构进行了分析。
According to the structural characters and production quantity, the process and die structure of parts are analyzed.
根据产品零件的结构特点和生产量，对其工艺、模具结构进行了分析。
The type, application, technological parameters and die structure of the cross-wedge-rolling technology were introduced.
介绍了楔横轧工艺的类型、应用、工艺参数及模具结构。
It designs a quick-change punch die structure, which can be used for combination punch die and flexible punch press system.
设计了一种可应用于组合冲模及柔性冲压系统的快换冲模机构。
Piercing technology of the rear mudguard of motorcycle has been analysed and the die structure has been emphatically introduced.
分析了摩托车后挡泥板的冲孔工艺，着重介绍了摩托车后挡泥板冲孔模的结构。
Discuss punching small thread fluted opening technology, die structure, die design and die manufacture technology on thin sheet.
论述了在薄板冲压件上，用变薄翻边冲制小螺纹底孔的工艺、冲模结构、设计与制作技术。
Analyzed forming process of the fixed frame in automobile steering system, mainly introduced side hold punching die structure design.
分析了汽车转向系统中固定架的成形工艺，主要介绍了冲侧孔的模具结构设计。
The RR process of the 12V240 crankshaft and die structure are designed and studied using the TFORM3 software of 3D rigid plastic FEM.
本文采用三维刚粘塑性软件TFORM3对12V240曲轴RR法限制成形工艺及模具结构进行了设计分析。
The design of die structure has much influence on shape dimension and precision of the formed crank-arm with a non elliptical section.
对于非椭圆截面曲臂的大型曲轴，其模具结构设计对曲轴成形后的形状尺寸精度影响极大。
The pressing process of transforming throwout lever is analyzed, Layout of multi-position progressive and die structure are introduced.
分析了转换推杆零件的冲压工艺，介绍了带料排样方案及级进模模具结构设计。
The structural design and working process of roll-groove die, as well as the improved die structure and its application are introduced.
介绍引进滚槽模具的结构设计及工作过程，以及改进后的模具结构及应用。
The forming process of pressing for farm transporter frame is analysed, the die structure and its design process are introduced in detail.
对车架冲压件的成形工艺进行了分析，并详细介绍了模具结构及其设计过程。
The drawing die structure of aluminum foil snack box and marginal pressure design program are introduced, the die structure is complicated.
介绍了铝箔快餐盒拉伸模结构及压边的设计方案，此模结构较复杂。
The work principle, die structure and typical part design of the new forming method of lateral holes on automobile hub have been introduced.
介绍了汽车轮毂侧孔成形新方法的工作原理、模具结构及典型零件设计。
The Combined die structure and local loading method were adopted. The upper housing was forged successfully by isothermal precision forging.
并采用组合的模具结构和局部加载方法等，成功地锻制出上机匣锻件。
The forming technology of rear shock absorber cap is analyzed, and its drawing die, flanging die and spinning die structure are also introduced.
分析了后减震器帽的成形工艺，介绍了成形该零件的拉深模、翻边模以及旋压模具结构。
应用推荐