Developed excogitates of two decumbence and one horizontal molding die realized the increasing height of branch pipe of heat pressure tee.
研发出了两个横梁和一个水平成型模具，实现了热压三通支管高度的增加。
When the pipe joint screw, should follow the principle of diagonal twist, not one by one in order to operate, do not screw the screw die, so that the correct installation of rubber gasket.
在拧管道接头螺丝时，应遵循对角互拧的原则，不要逐个顺序进行操作，不要一次性将螺丝拧死，这样才能将橡胶垫片正确地安装上去。
Developed excogitates of two decumbence and one hovizoutal molding die realized increasing height of branch pipe of heat pressure tee and reducing radius of synodical arc of tee.
研制出两套立式模具和一套卧式模具，实现了用工艺方法增加热挤压三通支管高度，缩小三通相贯区内拐角处圆弧半径的目的。
Pipe shall be homogeneous throughout, free from cracks, holes or foreign material, and shall be free from blisters, dents, ripples, die and heat marks.
管子应通体均匀，无裂纹、无孔眼或杂质，还应无气泡、凹痕、波痕、拉模划痕和热痕。
Extrusion die design for compound triple-layer plastic pipe by two extruding machines is introduced.
介绍用两台挤出机共挤复合三层塑料管材机头的模具设计。
The spiral groove of pipe is formed by press die.
采用冲压模具实现了管材螺旋槽成形。
The response of the polymer melt behavior of orientation for axial vibration of screw in short pipe extrusion die head was studied by the light scattering technology.
利用光散射测量方法研究了短圆管挤出模头中聚合物熔体取向行为对螺杆轴向振动的响应。
This die success application, develope the core pipe punching hole processing scope.
该模具的成功应用，拓展了有芯管子冲孔的加工工艺范围。
The extrusion and piercing die was developed based on the technical analysis on the shaping characteristics of deep taper pipe with hole.
针对带孔深锥形管件的成形特点进行了工艺分析，确定了成形方案，设计了锥形管挤压模和冲孔模。
According to technology needs of pipe cap parts, this paper gives a qualified stamping technology through testing, and designs relevant die.
针对管帽零件的技术要求，通过试制确定了合理的冲压工艺方案，设计了相应模具，应用效果良好，制件质量达到了图纸设计要。
On condition that plastic melt volume undergoes a uniform change, the authors analyse the internal shape of pipe die and produce an optimum shape curve.
以流道间隙处熔体体积均匀变化为条件，对管材挤出成型机头内腔的形状曲线进行分析优化，并且导出了一个优化曲线。
This paper introduces the design of extrusion die in producing hex pipe.
介绍了生产六方套热挤压模具的设计方法。
Manufacturing: Steel Pipe rolling, jumping pieces of hardware; Die-casting pieces for processing.
制造：钢管轧制，五金冲件；压铸件加工。
The quantitative relation between hot pipe structure and cooling ability of partial die casting mould was approached.
研究热管结构对压铸模具冷却能力影响的定量关系。
The movable matrix module of the bending die for round pipe was drawn precisely according to the rotation property of the particle.
按质点的转动性质精确绘制出圆管弯曲模活动凹模模块，便于数控线切割机一次完成凹模加工，缩短了制模周。
The pipe blank dimensions and the necking force were calculated. The structure of necking die for the flame pipe was introduced.
确定了缩口次数并计算了管坯尺寸和缩口力。
The technical characteristics of no-female die piercing on pipe were analyzed and the key points in design of a practical no-female die piercing die were presented.
分析了管材无凹模冲孔的工艺特点，提出了该类模具设计的要点。
The paper involves an investigation into the new steel pipe manufacture technology of roller die drawing with the two-stand Y type three-high mill.
研究了利用二连式Y型三辊辊模拉拔钢管生产新技术。
Die from the back of high temperature water through the pipe back to mold temperature machine, the pump pressure delivered to the heater, the heating tube is sent to die, so the cycle.
从模具囬来的高温水经过管路囬到模温机，经泵浦加压后输送到加热器，通过电热管加热送至模具，如此循环。
A structure form of floating matrix core shaft has been adopted in the die for slitting the water pipe of the radiator.
散热器进出水管剖切模采用浮动凹模芯轴结构形式。
Based on analysis of the characteristics of steel pipe roller die drawing process, the analytical equation for the drawing force during roller die drawing operation is derived.
分析了钢管辊拔的特征，推导出辊拔时辊拔力的解析式。
The top die is the important component of the complete set of pipe-bending die, the design of which directly impact the bending quality and the bending efficiency.
顶模是弯管全套模具的重要部件，它的设计直接影响弯管质量和弯管效率。
The utilization ratio of the material and the production efficiency can be increased by using the extrusion die in hex pipe production.
利用挤压方法生产六方套，不仅提高了材料的利用率，而且提高了生产效率。
The structural feature and working process of the bending flaring die for conduct pipe was introduced.
介绍了导管弯曲扩口模的结构特点及模具工作过程。
According the structure characteristics of oil filling pipe, combining production experience, designed expanding and necking die.
针对加油管的结构特点，结合企业生产经验，给出了连续扩。
Welded pipe that bended by hot bending method with a set of specific die and welded by plasma arc welding method was used as tubular blank of SPF.
采用焊管作为管坯 ，焊管弯曲采用专用模具热弯 ，焊接采用等离子弧焊。超塑成形采用多层模结构 ，用模具来控制波形。
Also the new technology of finish machining for pipe die has been established, the approaches to increase the machining efficiency of the pipe die have been raised as well.
制订了新的管模精加工工艺，并提出提高管模产品加工效率的途径。
The line is mainly used to produce flow pipe and drainpipe etc. The set is composed of extruder, die, cooling trough, tractor, the cutting machine, plank and electric control system etc.
该机组用于生产供水管、排水管等，该机组主要由挤出机、机头、冷却水槽、牵引机、切割机、支架及电气控制部分等组成。
The line is mainly used to produce flow pipe and drainpipe etc. The set is composed of extruder, die, cooling trough, tractor, the cutting machine, plank and electric control system etc.
该机组用于生产供水管、排水管等，该机组主要由挤出机、机头、冷却水槽、牵引机、切割机、支架及电气控制部分等组成。
应用推荐