It decreases die cost and increases production efficiency. The characteristics of die structure, work principle and DE - sign gist of every procedure are introduce further.
降低了模具成本，提高了生产效率，并进一步介绍了各成形工序的模具结构特点、工作原理及设计要点。
Forging forming of heavy flange and fork by different forging equipment has been analysed with die optimization and failure analysis for the purpose of higher productivity and lower die cost.
分析比较了在不同锻压设备上进行重型法兰叉类件锻造成形的特点，对其模具进行了优化设计和失效分析。
The weaknesses have been pointed out of former die structure for upsetting and extruding dumb iron. A de-sign of new type of combination die has been presented, resulting in markedly reduced die cost.
针对原弹簧座镦挤模具结构的缺陷，设计了新型镶块式模具结构，使模具成本显著降低。
Meanwhile, common cast iron was used as the main material of the die so that the manufacture cost was lowered.
同时，由于采用普通铸铁作为模具主体材料，降低了成本。
Such fine blanking process simplifies die structure, easy to make and to install, and also has low cost.
这种精冲方法，模具结构简单，易于制造和安装，成本低。
To reduce the cost and lead time of developing a trimming die, a method to obtain the trimming line in flange process is proposed on the basis of blank grid deformation.
为减少修边模的开发周期和成本，提出一种基于板料网格变形的修边线确定方法。
Any errors found in the dies during tryout and final acceptance test will be corrected by the die supplier at no additional cost to Su-dan.
任何在模具试模及接受过程中发现的错误应由供应商更正，任何相关费用与模具性能。
The die is of fast making, high efficency, excellent quality, lower cost and so on, and is a new try of PCB contour process.
这种模具制作速度快、效率高、质量精良、成本较低，不失为印制电路板外形加工的一种新的尝试。
Thus not only the purchase cost was reduced, but also the working life of the protruding die was prolonged.
不但使用户大幅度降低了凸模的购置成本，而且使凸模的使用寿命得到成倍的提高。
It is worth while recommending this steel for manufacturing cold extrusion dies, because it not only reduces the production cost through saving alloying elements, but also prolongs the die life.
新钢种作为冷挤压模具用钢，既节约了合金元素，降低了成本，又提高了模具寿命，具有推广价值。
In order to reduce the cost, raised the benefit, we used the self-made forming die forming.
为了降低成本，提高效益，采用可以自制的成形模成形。
The construction of once-formed compound repositioning die is also adopted to guarantee the quality of the product, raise the production efficiency and decrease the cost of production.
并采用一次成形的复合复位模结构，既保证了产品的质量，又提高了生产效率，同时降低了生产成本。
There are many difficulties in estimating the manufacturing cost and production cycle of the die in production quoting due to the uncertainty of the man-hour of die adjusting and testing.
针对由于汽车模具调试工时难以确定所导致的制造成本和生产周期与生产实际相差较大的问题，提出了基于工时管理系统的汽车模具调试工时估计方法。
Therefore, it is the same with Data Mining with probability statistic character and knowledge discovery problems, especially with die problems that obtain sample information or need high cost.
因此，适用于具有概率统计特征的数据采掘和知识发现问题，尤其是样本难以获取或代价过于昂贵的问题。
Therefore , it is the same with data mining with probability statistic character and knowledge discovery problems , especially with die problems that obtain sample information or need high cost.
因此，适用于具有概率统计特征的数据采掘和知识发现问题，尤其是样本难以获取或代价过于昂贵的问题。
Several kinds of rotor cast can be manufactured on one die by changing a paneling, so the ratio of utilization of the mould is raised, and the cost of manufacture is lowered.
通过更换镶板，可在一套模具上生产多种转子铸件，提高了模具利用率，降低了生产成本。
A die for slot punch and damping hole punch is designed for generator rotor. It can reduce the cost, raise the efficiency and reliability.
设计了发电机转子冲片槽形及阻尼孔冲模。其结构融冲槽形、阻尼孔两工序为一体。降低了模具制造成本，提高了生产率，且稳定可靠。
The design and development of cost management are introduced for panel die manufacture.
介绍了模具成本信息管理系统的设计原理和编程方法。
They also take part in the machine a complex die casting tender, the result of processing accuracy, and cost is low and the successful bidder.
他们还以该机床参加了一个复杂铸造模具的投标，结果以加工精度好，成本低而中标。
The preparation method is simple, has small equipment tonnage required, short demoulding time and low cost, and has no strict requirement on the die.
本发明制备方法简单、所需设备吨位小、脱模时间短、对模具没有严格要求及成本低廉。
This research works provided an effective method and measure for deep drawing parts and die design and further reduced the cost of die design.
为提高拉深件设计效率，降低模具设计开发成本提供了有效的方法和手段。
Adopting once punching process and using fewer cost and worse plasticity leftover material finish twice drawing of compound die.
分析了小圆角圆筒件的成形工艺性，利用成本较低、塑性较差的角料，采用一次冲压工序完成二次拉伸的复合模。
The dies must be made by modern manufacturing methods from appropriate die materials in order to provide acceptable die life at a reasonable cost.
为着提供成本合理和具有令人满意的寿命的模具，必须用合适的模具材料和用现代的制造方法来制造模具。
The set of die is made up of two com-pound dies. It guarantees product quality, decreases cost and increases economic interest.
本套模具由两套复合模具组成，既可保证产品质量，又降低了成本，显著地提高了经济效益。
The set of die is made up of two com-pound dies. It guarantees product quality, decreases cost and increases economic interest.
本套模具由两套复合模具组成，既可保证产品质量，又降低了成本，显著地提高了经济效益。
应用推荐