A device adapter set can provide optimum weights for a page and for each control.
装置配接器集可以提供页面和每一个控制项的最佳权重。
Provides coding techniques to writing a new device adapter for each supported device.
提供为每个支援装置撰写新装置配接器的程序码撰写技术。
Every set of device adapters has a page adapter class that is associated with the mobile page itself.
每组装置配接器都有一个与行动网页本身相关联的页面配接器类别。
It is easier to add a new browser configuration file for a device than it is to write new device adapter code.
与编写新的设备适配器代码相比，添加设备的新浏览器配置文件要更容易一些。
You can compile the adapter code by running the following command in the directory that contains the device adapter code.
可以通过在包含设备适配器代码的目录中运行下列命令来编译适配器代码。
When you exchange the adapter, the existing device driver supports the adapter because it is of the same type.
当您调换适配器时，现在的设备驱动程序会支持此适配器，因为它是同类型的。
A link aggregation device can be used to connect two physical adapters together to look like one adapter.
可以使用链路聚合设备把两个物理适配器连接在一起，让它们看起来像一个适配器一样。
The SEA treats the link aggregation device (LNAGG) as though it is a physical adapter.
SEA把这个链路聚合设备(LNAGG)当作一个物理适配器对待。
Device configuration and configuration information about devices below the adapter are retained for the replacement device.
设备配置以及关于此适配器之下设备的配置信息都会为接替的设备保留。
If you are migrating from IBM to IBM storage, then it is likely that you will simply need to update the MPIO code, FC adapter firmware and supporting device drivers.
如果您是从ibm存储迁移到IBM存储，那么您可能只需要更新此MPIO代码、FC适配器固件以及设备驱动器。
Once the link aggregation device has been created, it needs to be mapped to a virtual adapter.
创建链路聚合设备之后，需要把它映射到虚拟适配器。
An adapter is a device that enables incompatible things, such as garden hoses or electrical connections, to connect and work together.
适配器是一种设备，可以使不兼容的东西(如橡胶软管或电源接头)连接在一起并共同工作。
Once a physical adapter or LNAGG device has been mapped to a virtual Ethernet ID on the IVM, then the virtual adapter needs to be created for each logical partition.
把物理适配器或LNAGG设备映射到IVM上的虚拟以太网id之后，需要为每个逻辑分区创建虚拟适配器。
Change PCI Device Boot Priority to the adapter your root file system disk is using (as in Figure 2 below), if your Linux is installed on a local Planar SAS disk.
如果您的Linux安装在本地PlanarSAS磁盘中，请将PCIDeviceBootPriority更改为根文件系统磁盘正在使用的适配器(如下面的图2所示)。
reserve : This command is issued by a host bus adapter to obtain or maintain ownership of a SCSI device.
reserve（占用） :这个命令由总线适配器发送用以获得或保留对SCSI设备的所有权。
The fc adapter device name starts with FCS.
fc适配器设备的名称以fcs开头。
The fc adapter device name starts with "FCS."
fc适配器设备的名称以“fcs ”开头。
In the output from our lsdev command, you can see that the link aggregation device (ent10 - ent12) looks like a physical adapter.
在lsdev命令的输出中，可以看到链路聚合设备(ent10-ent12)就像是一个物理适配器。
Gol021-this level of firmware corrects the vendor device ID on EMC Class B adapters so that the adapter is recognized during AIX Network Installation Management (NIM).
这个固件级别将更正emcClassb适配器的供应商设备ID，以便在AIX网络安装管理(NIM)过程中能够识别该适配器。
Upgraded the BIOS and device drivers for the IBM ServRAID adapter to 2.82 or higher.
为IBMServRAID适配器将BIOS和设备驱动器更新到2.82或更高版本。
Because the device descriptor read from the adapter during enumeration matches the information registered by the hci_usb driver with the usb core, this driver gets attached to the Belkin usb device.
因为在枚举期间从适配器读取的设备描述符与hci_usb驱动程序注册到usb核心的信息相匹配，所以这个驱动程序可附加到Belkin usb设备。
Release: This command is issued by the owning host bus adapter when a disk resource is taken offline; it frees a SCSI device for another host bus adapter to reserve.
release(释放)：当磁盘资源下线的时候，这个命令由拥有该磁盘的总线适配器发送。这个命令释放该SCSI设备供其他总线适配器占用。
Next, consider the examples of a Bluetooth CF card, a Bluetooth USB adapter, a device with a built-in CSR Bluetooth chipset, and a Sony Bluetooth Headset to see how they work with Linux.
下一步，考虑BluetoothCF卡、BluetoothUSB适配器、具有内置CSR Bluetooth芯片组的设备以及Sony Bluetooth耳机的示例，了解它们在Linux 下是如何工作的。
This allows you to map the link aggregation device to a virtual device (ent13 - ent15) via a Shared Ethernet Adapter (ent16 - ent18).
这样就可以通过SharedEthernetAdapter（ent16-ent18）把这个链路聚合设备映射到一个虚拟设备（ent13 - ent15）。
Or, if you have the wrong set of device drivers installed, running devfsadm might not configure that Fibre Channel adapter you're trying to set up.
如果安装的设备驱动程序设置出错，那么运行devfsadm或许无法配置您想要安装的FibreChannel适配器。
For example, an Ethernet adapter of ent0 has the logical device of en0 bridged off of it.
例如，Ethernet适配器ent0有对应的逻辑设备en0。
More important, the iPad 2 also has video mirroring, ensuring that once you have connected the device to the HDMI adapter, the iPad will display the contents of its screen on an external monitor.
更重要的是，iPad2还拥有视频镜像功能，可以确保一旦连接到HDMI适配器，iPad 2将会在外部监视器上显示它上面的内容。
The example shown USES the -d switch to display all statistics, including device-specific statistics, for the adapter en2.
这个示例使用-d选项显示适配器en2的所有统计数据，包括与设备相关的统计数据。
Enable protection on the fc adapter (DIF_enabled attribute of FCS device).
在fc适配器上启用保护(fcs设备的DIF_enabled属性)。
If the device is an intelligent device, such as a hardware adapter that supports multiple mechanisms, the STDLL can be thin because much of the session information can be stored on the device.
如果该设备是智能设备，譬如支持多种机制的硬件适配器，STDLL可以变得简单因为设备能存储大多数会话信息。
应用推荐