Air terminals buildings adopt air supply tower, floor exhaust grillage and smoke exhausting skylight controlled by infrared detector.
候机楼采用了地面送风亭射流送风方式、地面排风方式及红外线对射探测器控制的排烟天窗。
The temperature of an object detected by the infrared detector depends on the emission coefficient, the distance and the lighting area.
一个物体的温度的红外线探测器发现取决于排放系数，距离和照明领域。
At a predetermined distance (a), the infrared detector "sees" a circular area that is called the visible surface (b).
在预定的距离(一)，红外探测器“看到”的圆形区域内被称为可见的表面(乙)。
This makes sense for the reason that temperature oscillations or oscillating emissions from the metal surface often occur which would cause the infrared detector to trigger when it was not wanted.
这使得因为从表面温度振荡或振荡金属的排放量往往发生会导致红外探测器触发时，它不想要的感觉。
Then the lowest occurring temperature must still be detectable, which implies that the threshold temperature of the infrared detector must be chosen to be very low.
接着发生的最低温度仍然必须检测，这意味着对红外探测器起点温度必须选择是非常低。
The infrared sub image system with rosette scanning is composed of a rosette scanning mechanism and a single element infrared detector.
玫瑰扫描红外亚成像系统是利用玫瑰扫描机构和红外单元探测器构成的一种亚成像系统。
The further the infrared detector is from the hot surface, the less the energy is that can enter into the optics of the infrared detector.
从进一步的红外探测器热的是表面，少的能量，是可以进入的红外探测器的光学系统。
If the hot surface is smaller than the field of view of the infrared detector, not so much energy enters into the opening of the infrared detector as would be possible under full illumination.
如果热表面比红外探测器的视场，没有那么多的精力小全光照下进入到作为有可能红外探测器开幕。
The system can be used to measure the voltage responsivity and detectivity of infrared detector at different modulation frequency with rapid speed and high accuracy, it meets the need of measurement.
该系统可以自动测试不同调制频率下红外探测器的电压响应率和探测率，能够快速准确地完成测试任务，满足了测试要求。
Pyroelectric detector and fast respond infrared radiometer are used in the system to carry on the measurement, and effective data processing method is adopted to improve the test accuracy.
该系统分别采用热释电探测器和快速响应的红外辐射计进行测量，并采取了有效的数据处理方法，提高了测试精度。
This paper deals with method of soldering thermoelectric cooler with metal dewar of infrared detector.
本文论述了四级微型半导体致冷器与红外探测器金属杜瓦瓶的钎焊方法。
The analysis results demonstrate that the infrared detector of the anti-missile system in the reentry can work well on short wave and medium wave.
分析结果表明，反导系统红外探测器在再入飞行段的最佳工作波段是短波和中波。
They turn into carbon dioxide generated by non-dispersive infrared detector, which were measured in water of the total carbon (TC) and inorganic carbon (IC).
其所生成的二氧化碳依次导入非分散红外检测器，从而分别测得水中的总碳(TC)和无机碳(IC)。
The design of intelligent infrared beam smoke detector based on PIC MCU id presented.
给出一种PIC单片机为核心的智能红外光束感烟探测器的设计。
In the article measuring system of infrared detector is introduced which is playing important role during working, it can measure electronic-optical parameters effectively and quickly by improvement.
文中介绍了红外探测器参数测试系统经过改进后，可准确、快速地进行探测器光电参数的测量，并已在实际应用中起了重要的作用。
The thermal design of the microbolometer FPA is a difficulty and key problem when an uncooled infrared microbolometer detector is designed.
微测辐射热计fpa的热设计是非致冷红外探测器设计的难点和关键。
The purpose is to introduce the signal processing system of position detection based on four-quadrant infrared detector.
实现基于四象限红外探测器的位置检测信号处理系统。
A spaceborne radiant cooler for cooling multielement infrared detector array in infrared Multispectra Scanning System (IRMSS) is developed.
研制了一台用于冷却红外多光谱扫描仪中多元红外探测器列阵的星载辐射制冷器。
On the basis of Uncool infrared Focal Plane Array (UFPA) detector, the optics, structure and the circuit of the infrared imaging system for cloud meteorological observation are designed.
基于非制冷红外焦平面列阵(ufpa)探测器件进行了气象测云红外成像系统的光学设计、结构设计与电路设计，对系统光学设计结果进行详细分析。
This lecture about infrared radiation temperature measuring technology contains two sections: infrared radiation and infrared detector.
本次讲座主要介绍红外辐射测温技术内容，包括红外辐射与红外探测器两部分。
The MEMS technology and its main characteristics are briefly described, and then its application in uncooled infrared detector is introduced in details.
本文简要介绍了MEMS 技术的工艺及其主要特点，并对MEMS 技术在非制冷红外探测器研制方面的应用作了比较详细的阐述。
Pointing to the property of photoconductive multiunit infrared detector, an automatic testing system for uniformity of infrared detector is developed.
针对光导型多元红外探测器特性，研制了红外探测器均匀性自动化测试系统。
In the section of infrared detector, the concept of infrared detector, photoelectric effect, photoconductive detector and photovoltaic detector are mainly described.
红外探测器部分主要讲红外探测器的概念、光电效应、光子探测器中的光电导探测器和光伏型探测器。
The uniformity and linearity of spectral response of infrared detector are considered as the important parameters to evaluate the characteristics of infrared detectors.
红外探测器光谱响应度的均匀性及直线性一直被认为是评价红外探测器性能的关键技术指标。
The temperature responses in the grinding zone were measured simultaneously using a two color infrared detector and a sandwiched foil thermocouple.
用光纤辅助双色红外探测仪和三明治薄膜热电偶同时测量了磨削弧区的温度响应。
The discovery of pyroelectric effect is a base for laser and infrared detector.
热释电效应的发现，为激光和红外探测的应用奠定了良好的基础。
To satisfy the requirement for high performance infrared detector, a selective epitaxy Schottky barrier diode of SiGe was realized based on high quality silicon device.
为了满足高性能的红外探测要求，以高品质硅基器件研制了选择性外延锗硅肖特基二极管。
To satisfy the requirement for high performance infrared detector, a selective epitaxy Schottky barrier diode of SiGe was realized based on high quality silicon device.
为了满足高性能的红外探测要求，以高品质硅基器件研制了选择性外延锗硅肖特基二极管。
应用推荐