Results of destructive test on hexagon section boom show that the test resu...
对六边形臂进行破坏试验，试验结果与计算值相当吻合。
The method of cocoon non-destructive test was studied with the machine vision.
应用机器视觉技术研究了进行蚕茧无损检测的方法。
Real response to the true shear capacity of bridge piers, this test belongs to destructive testing.
为了真实反应桥墩的抗剪能力，本文试验实际为破坏性试验。
There are non-destructive testing equipment testing equipment 9, 18 physical and chemical test equipment.
检测设备有无损探伤设备9台，理化试验设备18台。
For in-service structure it is difficult to con duct destructive test since its original finger print is hard to obtain.
在役结构因其原始指纹不易获得，使得对其进行损伤检测存在一定的困难。
This data analysis system is very effective in recognizing and pitching the defect during the infrared non-destructive test.
该数据分析系统用于红外无损检测中的缺陷识别和定位十分有效。
It is very important for engineer to determine the uplift ultimate bearing capacity by using the data of non-destructive test of pile.
如何利用现场抗拔静载试验中未达到破坏的工程试桩数据来确定其抗拔极限承载力是一个重要的工程问题。
This method is feasible with high accuracy in measurement, establishing the theoretical basis for quick and non-destructive test of cocoon qua…
该方法测量精度高，切实可行，为快速无损检测蚕茧质量奠定了理论基础。
This method is feasible with high accuracy in measurement, establishing the theoretical basis for quick and non-destructive test of cocoon quality.
该方法测量精度高，切实可行，为快速无损检测蚕茧质量奠定了理论基础。
The resistance furnace, widely used in material fatigue test and destructive testing, can be used with the supporting the use of the testing machine.
本电阻炉广泛适用于材料的疲劳试验及破坏性试验，可配合试验机配套使用。
Some methods usually used in the field of non - destructive test of composites, and their basic principles, features, and applied scope are described.
主要介绍了目前在复合材料非破坏检测方面国内外常用的几种方法，并介绍了其中几种方法的基本原理和它们各自的特点及适用领域。
In order to realize automatic flaw detect for the large-scale complex curved surface parts, ultrasonic non-destructive test systems had been developed.
为了实现大型复杂曲面工件的自动化缺陷检测，开发了超声无损检测机器人系统。
Aiming at the test of void content of carbon-fiber reinforced composite used in aeronautic industry, developed a portable ultrasonic non-destructive test system.
针对航空工业碳纤维复合材料板材的孔隙率检测，研制了便携式超声无损检测系统。
Relay incoming inspection should be light-light, do the destructive test of products must be consistent with normal goods isolated and labeled, shall not be used.
继电器入厂检查及使用中应轻拿轻放，防止跌落影响参数。入厂作破坏性检查的产品要与正常产品严格区分标识，不得装机使用。
Test specimens shall be taken after all non-destructive testing (NDT) has been carried out and which has passed the relevant inspection criteria for the NDT method(s) used.
试样的截取应在所有非破坏性试验（NDT）已经完成并已经通过所用NDT方法的相关检查依据后进行。
This method can reproduce the real collision course of the automobile in the traffic accident, however, it is a destructive test and needs the large test site and costs most.
该方法能真实地再现交通事故中汽车的实际碰撞过程，但是，汽车实车碰撞是破坏性试验，需要较大的试验场地，研究成本较高。
The consolidating wave speed changes distinctly in 7 days, so it makes up the loss that in being non-destructive testing technology couldn't be used to test the fresh concrete strength.
固结波速在混凝土7天龄期内变化尤为显著，这弥补了现有的混凝土无损检测技术不能应用于检测早龄期(特别是7天龄期以前)混凝土强度这一空白。
The popular non destructive test methods for the foam-cored sandwich structure are reviewed; including air coupled ultrasonic method, pulse-echo ultrasonic method and shearogragh method.
回顾了泡沫夹层结构常用的无损检测方法：空气耦合超声方法、脉冲回波超声方法以及激光错位散斑干涉方法。
This paper deals with a destructive test of 14 new and old concrete reinforced boundary connections. The destructive patterns, loaded capacity and shear_resistant calculation formula are given.
对14个配有钢筋的新旧砼界面连接节点进行了破坏性的试验，得出了破坏形态及其承载力的计算公式。
Metal Magnetic Memory Testing (MMMT) is a new technology in metal non-destructive test (NDT). MMMT is not only used for failure early diagnosis, but also for defective inspection of steel casting.
金属磁记忆检测是无损检测领域的一项新技术，不仅可以对钩尾框的失效进行早期诊断，而且可以对钩尾框缺陷进行准确检测。
The dielectric strength test can be made to be destructive or non-destructive.
电气强度测试可分为破坏性和非破坏性。
It is necessary to choose unified and suitable test methods and indexes as soon as possible to reduce the early destructive phenomena occurred in asphalt pavement.
尽快找到统一的、合适的试验方法和评价指标，对于减少沥青路面早期破坏是非常必要的。
The purpose of this procedure is to provide for a system, instructions and to identify the procedural controls associated with inspection, non destructive examination and test activities.
本程序确定了检查、无损检验和试验相关的程序控制，并提出了一套体系和指示要求。
The test pieces and instrument for side- testing method to measure the depth of destructive layer of fine- ground glass surface are mainly introduced.
本文主要介绍用侧面观测法测量精磨玻璃表面破坏层深度的试件制做、测试仪器；
The test method employed is non-destructive, so that only one model is needed for investigating stresses in a rotating disc at various speeds, and for determining the static shrink fit stresses.
由于这是一种非破坏试验方法，所以仅一个模型就可以对几种不同转速以及静过盈状态下的应力进行测定。
Unlike a voltage measurement, a charge measurement can be a destructive measurement. In other words, the process of making the measurement may remove the charge stored in the device under test.
与电压测量不同，电荷测量可能是破坏性测量，换言之，进行测量的过程可能会消除被测器件中储存的电荷。
The test result is caused by the hard test for destructive purpose.
此测试结果是由硬性破坏性测试得到的。
It is important for engineers to determine the ultimate bearing capacity of single piles through non-destructive field test.
如何利用未达到破坏的试桩资料确定单桩极限承载力是一个重要的工程问题。
It is important for engineers to determine the ultimate bearing capacity of single piles through non-destructive field test.
如何利用未达到破坏的试桩资料确定单桩极限承载力是一个重要的工程问题。
应用推荐