Through the discussion and analysis of the method about how to control the GPRS module, Author designed the hardware circuit.
通过对GPRS模块控制方法的探讨和分析，设计了其相应的硬件控制电路。
And we have designed the driver and the hardware circuit of this modular.
并实现了这个模块的硬件电路的设计和驱动程序的开发。
Have designed the concrete hardware circuit, and debug and pass.
设计了具体硬件电路，并调试通过。
The lower frequency virtual digital stored oscillograph was designed and researched combining software control technology with interface circuit, software and hardware system were made.
本文以软件控制技术为关键，配以接口电路，研制了超低频虚拟数字存储示波器。进行了相应的软、硬件系统的设计。
In this paper, the hardware circuit of electric cost recorded computer is studied and designed.
介绍了用电量抄录微机硬件电路的研究与设计。
Operation principle and hardware circuit utilizing AT89C51 one-chip computers to control the traffic signal lamp are designed.
利用AT 89 C51单片机控制交通信号灯的工作原理及其硬件电路设计。
Have designed the circuit of the hardware and provide the control procedure. Basic function of the implementation system.
设计了硬件电路，给出了控制程序，实现系统的基本功能。
Based on the analyses of the GPRS module control method, the corresponding hardware control circuit is designed in this paper.
本文通过对GPRS模块控制方法的探讨和分析，设计了其相应的硬件控制电路。
The hardware circuit and the software program are designed.
从原理上进行了分析，并设计了硬件电路和软件程序。
Software program is designed according to hardware circuit connection and the function of each component design.
软件程序的设计是根据硬件电路图的连接和各个元器件的功能进行设计。
If the hardware circuit is designed by CPLD, the data acquisition of high speed and high precision incremental encoder could be obtained.
若采用CPLD设计硬件电路，可以实现高速度、高精度增量型编码器的数据采集。
The display is designed with a small, less hardware, circuit structure is simple and easy to implement.
本此设计的显示屏的设计具有体积小、硬件少、电路结构简单及容易实现等优点。
The circuit software was designed using schematic diagram and hardware description language (VHDL) respectively.
该抢答器单元电路的软件设计分别利用原理图设计、硬件描述语言设计完成。
The hardware and software has been designed, prototype and circuit has been tested partly.
完成了软件和硬件的设计，以及实验样机的部分调试。
The hardware of permanent magnet AC servo system is designed, including system power main circuit, system control circuit and auxiliary circuit.
设计了永磁交流伺服系统硬件电路，包括系统功率主电路、系统控制电路和辅助电路。
The hardware system cored on LPC2294 is designed, and the main circuit is described in detail.
对以LPC2294为核心处理器的硬件系统进行最小系统的设计，并对主要电路进行了较为详细的叙述。
The hardware control system based on TMS320F240 is designed, which includes sampling circuit, protective circuit, phase-compensated circuit and so on.
设计了以TMS320F240为控制核心的硬件控制平台，包括采样电路、保护电路、六相触发同步等外围电路。
The detailed hardware and software are designed. The circuit of hardware and flow chart of software are given.
进行了详细的硬件和软件设计，给出了具体的硬件电路及软件流程。
To enhance the stability of the system, design a lot of decoupling and bypass capacitors in hardware circuit. And the JTAG debug interface is designed for convenient debugging.
在硬件电路设计中，大量采用了性能较好的去耦和旁路电容来加强系统的稳定性，并为了调试方便设计了JTAG接口。
Using TMS320F2812 as the core of the control system, drive circuit, sampling circuit, protection circuits, man-machine interface circuit hardware components and control system software were designed.
以TMS320F2812为控制核心，设计了系统的控制驱动电路、采样电路、保护电路、人机接口…更多电路等硬件部分和控制系统软件。
The tachometer so designed and developed excels in its simple hardware circuit, wide range tachometric survey, high rate accuracy, and high resolution power as compared with conventional tachometers.
该测速仪具有硬件电路简单，测速范围、测量精度及分辨力均高于目前转速表等优点。
We designed the hardware of test system in the paper, analyzed the principle of each parts of hardware and the design of microcomputer interface circuit.
论文进行了检测系统的实际硬件设计，具体分析了硬件系统中各组成部分的工作原理及实际微机接口电路的设计过程。
Before hardware circuit were designed, I analysis its theoretical, I did some of the circuit simulation and circuit experiment, compulated the main parameters of the circuit.
在硬件电路搭建之前，对其进行了理论分析、部分电路的仿真和电路实验，优化了电路主要参数。
According to the practical operation situation of SF6 circuit breaker, the hardware circuit and the software arithmetic are designed to intend to accurately monitor the SF6 circuit breaker in service.
根据SF_6断路器运行过程中的实际情况，设计了相应的硬件电路和软件算法，以期较为准确地对带电运行状态下的SF_6断路器进行在线监测。
The portable blade frequency measurement instrument based on DSP is designed next. The DSP-based circuit board is made and the software program for testing hardware circuit board is coded.
论文完成基于DSP芯片的便携式叶片频率测试仪的硬件电路设计和电路板的制作，并完成对电路板的测试。
Based on the working principle of VSP1012 video signal processing interface for CCD imaging system, video signal processing circuit and its hardware have been designed for CCD imaging system.
在分析VSP1012型CCD视频信号处理芯片工作原理的基础上，设计了CCD成像系统的视频信号处理电路及其硬件电路。
The characteristics and structure of braking energy regenerative system of city bus are introduced, and the hardware circuit of the controller and related software are designed.
介绍了公共汽车制动能量再生系统的特点及组成，对控制器的硬件电路及软件进行了设计。
At first, hardware circuit of the system has been designed, including minimum system of DSP, sampling pretreatment, dead zone formation, constant amplitude control and display circuit.
本文首先设计了系统的硬件电路，包括DSP的最小系统电路、采样预处理电路、输出信号死区形成电路、恒幅控制电路和显示电路。
The software for DSP and PC is designed to work with the hardware system, which accomplishes the control of hardware circuit, communication between DSP and PC and calculation of the acquired data.
为配合硬件系统，设计了上位机软件和下位机软件，以完成系统硬件电路的控制、PC和DSP之间通讯及测量数据的处理。
The software for DSP and PC is designed to work with the hardware system, which accomplishes the control of hardware circuit, communication between DSP and PC and calculation of the acquired data.
为配合硬件系统，设计了上位机软件和下位机软件，以完成系统硬件电路的控制、PC和DSP之间通讯及测量数据的处理。
应用推荐