It was applied to solve several different problems and, along with the proxy pattern, became a core project metaphor that was often discussed in design sessions.
它与代理模式一起被用来解决几种不同的问题，并成为设计会议中常常讨论的一项核心项目课题。
Looking back, I find it fascinating that I was trying to solve a content problem using visual design alone.
回顾当时，我觉得自己想单纯靠视觉设计的手段来解决内容问题的想法很有意思。
A new engineering method for dealing with discrete design variables for design and manufacture was put forward in order to solve optimal design with mixed discrete variables.
为了解决混合离散变量机械设计问题，提出了一种面向设计、制造的设计变量离散化处理方法。
The three-dimensional finite element method was used to solve some key problems in the design of the box floor in Suzhou River Estuarine Lock project.
针对苏州河河口水闸工程中的大跨度箱形底板设计中遇到的困难，利用三维有限元对底板结构进行计算分析。
The bridge decking width adjustment design was introduced to solve the problem of consistency between the outside profile of acceleration-deceleration lane and road alignment.
为了解决互通式立交中位于加减速车道上桥梁外边线与路线线形的吻合问题，提出了采用不同板宽调整桥面宽度的设计方法。
The topological optimization method was used to solve the lightweight design problems of components and parts in automatic weapons.
引入结构拓扑优化方法，解决自动武器零部件减重设计问题。
Was named as a technology leader and is responsible for the design of other engineers to solve problems (system, PROE), and make technical checks.
被评为为技术带头人，并负责为其他工程师解决设计中的难题（系统，PROE），并做技术把关。
To solve the problem of composite part design, through application of generative knowledge representation based on rule, a knowledge based system for composite part design was developed.
针对复合材料构件设计中所存在的问题，应用基于规则的产生式知识表达，设计和建立了飞机复合材料构件的设计知识库系统。
Although some assistant software was used in two-way HFC networks design, it had not enough intelligence to solve the problem of passive coax networks design.
虽然也有一些工程设计辅助软件，但这些软件不能完全满足双向HF C网络中同轴无源分配网络的智能设计要求。
Based on it, quantified process planning system was established. The new way was presented to solve the problem of quantified process design under the 3d environment.
给出了基于该工艺模型的定量化工艺设计系统，为解决3d环境下的定量化工艺设计提出了一种新思路。
Finally, the waiting area was set up to solve the problem of waiting for tide and ships, and the pattern of double buoys mooring was adopted in the waiting area design.
最后采取设置候潮区的方法，解决船舶候潮和上、下船舶错航时待航问题，候潮区采用双浮筒系泊方式设计。
A case retrieval method was presented based on rough set theory in order to solve the retrieval problem in design of stamping dies.
针对冲模设计中的实例检索问题，提出了基于粗糙集理论的实例检索方法。
To solve this problem, a component optimization design method based on stability dependency was presented.
为此，提出了一种基于稳定依赖的构件优化设计方法。
A complete solution was given in the receiving circuit design to solve the technical problems such as high-voltage bias circuit and the pre-amplifier design.
接收电路设计给出了完整的解决方案，解决了高压偏置电路、前置放大器的设计等技术难题。
To solve the chattering problem caused by general Sliding Mode control in active magnetic bearings control, a Boundary Layer Approach was used in the controller design.
针对常规滑模变结构控制方法在电磁轴承控制当中引起的抖动问题，将边界层法用于滑模变结构控制器的设计。
Traditional TCP protocol's design was just concerning about wire network. It contributes the loss of data package to network congestion and employ congestion-control process to solve the problem.
传统的TCP协议是针对有线网络设计的，它认为数据包的丢失皆是由网络拥塞造成，从而启动拥塞控制过程。
A kind of automatic regulation device of drilling rig was developed to solve this problem by author of this paper. The design and working theory have details in this paper.
针对此问题，本文作者自行研制出了一种石油物探钻机自动调节装置，该装置的实现方案及其各部分电路工作原理在文章中有详细介绍。
With an aim to solve the long-term existing problem of the cracks in flow-front during thixo-forging, a new theory of constant volume flux of slurry was put forward in optimizing die design.
针对半固态成形，特别是触变锻造成形中浆料流动前沿开裂等质量问题，首次提出了流动前沿等体积流量的概念，并将其运用到半固态成形模具优化设计中。
Generation mechanism of metastability was discussed, and metastability in FPGA design was analyzed. A number of effective solutions were presented to solve the problem of metastability.
探讨了亚稳态的产生机制，对FPGA设计中的亚稳态进行分析，针对FPGA设计中的亚稳态问题，给出了一系列行之有效的解决方法。
In order to solve the above problems, a study on the DC-DC power modular of the loading terminal was conducted and a new design plan of the intrinsic safe DC-DC isolated power modular was provided.
为解决以上问题，对负载端直流-直流（DC-DC）电源模块进行研究，提出一种新的本安型DC-DC隔离电源模块的设计方案。
A new fast algorithm was proposed in order to solve the problem that the FIR impulse of odd points can only use inefficient MAC instruction in DSP FIR filter's design.
针对DSP领域中使用奇数个点的FIR冲击响应设计滤波器时，只能使用效率较低的MAC指令的问题，提出了一种新的快速算法。
A new fast algorithm was proposed in order to solve the problem that the FIR impulse of odd points can only use inefficient MAC instruction in DSP FIR filter's design.
针对DSP领域中使用奇数个点的FIR冲击响应设计滤波器时，只能使用效率较低的MAC指令的问题，提出了一种新的快速算法。
应用推荐