He can scan a broken part that is no longer available into a computer, or design a missing one from scratch, and then print out a copy made of plastic.
他可以先把一个坏了的零件用电脑扫描，或者凭空设计出丢失的零件，然后用3 - D打印机制造出一个塑料的模型。
The design process of plastic wye injection mould is stated in detail from the analysis of plastic part , the analysis of the process and the design of the struction.
从塑件分析、工艺分析、结构设计三方面详细阐述了常见塑料三通注射模的设计过程。
Familiar with structure design and MD process , master part manufacture process , plastic injection process and plastic tooling , maser moldflow . Familiar the use of office software.
熟悉结构设计与流程，掌握塑件、塑料模具的设计与运作流程。对塑料工艺有相当的研究与了解。熟悉办公自动化软件。
Based on the analysis of the structure characteristics of the plastic product with inner concave loop slot and the mold design projects, an injection mold for this kind of part was designed.
在分析环槽形内侧凹塑件结构特点及模具设计方案的基础上，设计了此类塑件的注射模。
The design method which allows some sections to be part-plastic can improve load-carrying more greatly than elastic design method does.
采用允许部分截面进入局部塑性状态的设计方法，相比弹性设计结构的承载力大为提高。
The design which combines a flexible wheel and output shaft into a integrative part in a plastic harmonic transmission is introduced. The feasibility of this method is validated.
介绍了将谐波传动中柔轮与输出轴做成整体塑料件的设计方法，并验证了其可行性。
Having 5 years or above plastic part design experience and at least 3 years project management experience. One also having metal pars design experience will be more preferred.
至少5年以上塑胶件设计经验和至少3年以上项目管理经验。如果还有五金件设计经验者优先。
Analyzed the influence of the plastic part injection molding process to part quality, introduced design of injection mold, mold parting structure design and mold temperature control design.
分析了塑件的成型工艺及模具注射成型对塑件质量的影响，介绍了浇注系统的设计，模具分型结构、模温控制的设计。
The design is a plastic mould design of the back over of mobile, which analysis part structural with ABS as the material of plastic part.
本设计是手机后盖塑料模具的设计，对零件结构进行了工艺分析，采用ABS作为塑件的材料。
Moulding technology of specular seat is analyzed and the injection mold of this plastic part gets designed furthermore working process and key points of die design and manufacture are provided.
分析了镜座的成型工艺，设计了该塑件的注射模，并介绍了该模具的工作过程和模具的设计与制造要点。
Through the analysis of the structure of the deep_cavity plastic part, the causes of some problems often fallen across in the design of the injection mould were found out.
对中性笔笔帽塑件进行了分析，确定了模具结构，阐述了深腔强脱塑件模具的设计注意要点，对同类注射模具有较好的参考价值。
The design which combines a flexible wheel and output shaft into a integrative part in a plastic harmonic transmission is introduced. Thc feasibility of this method is validated.
介绍了将谐波传动中柔轮与输出轴做成整体塑料件的设计方法，并验证了其可行性。
The plastic part produced in it has the precision meeting th design requirement and the part can meet the use requirement comple…
该模具运行灵活、可靠，制件精度达到了设计要求，完全可满足使用要求。
The plastic part produced in it has the precision meeting th design requirement and the part can meet the use requirement comple…
该模具运行灵活、可靠，制件精度达到了设计要求，完全可满足使用要求。
应用推荐