It introduced the hardware design of temperature control for the thermocouple auto-verification system.
介绍了热电偶自动检定控温系统的硬件设计。
According to the practical application object of the torque rheometer, the design of temperature control system is carried on.
本文针对转矩流变仪这个实际应用对象，进行了温度控制系统设计。
The theory of thermo-electric cooler (TEC) using Seebeck effect is introduced, and the design of temperature control circuit based on ADN8830 is discussed.
介绍了采用赛贝克效应工作的热电制冷器（TEC）的工作原理，详细讨论了基于ADN8830 的温度控制电路的设计。
This paper describes the hardware and software design of temperature control signal output channel based on 8098's HSO in the temperature control system of SCR power regulating.
介绍在晶闸管调功温控系统中，采用8098单片机的高速输出通道（HSO）作为温控信号输出通道的硬件和软件设计。
The design of The temperature control system based on MCU of is introduced in this paper.
本论文介绍了“基于单片机的温度控制系统”的设计及其相关内容。
Temperature is the major parameter of the industrial stove, and the purpose of this design is to achieve the automation control of temperature.
工业炉窑最主要的控制量就是温度，而本设计的目的就是实现温度的自动化控制。
This paper is mainly discuss the design about PLC temperature control system of box heat-treatment furnace.
本文主要讨论了以可编程控制器为核心的箱式热处理炉温度控制系统的设计。
The design of digital automatic temperature control water-heater is introduced.
介绍了数字式自动控温热水器的设计思想。
Degerming, anti-microbial, cooling, moisturizing, and precision temperature control, all of these demonstrate the human-oriented design approach of Haier Ice-Bar.
除菌抗菌，制冷保湿，精确控温，这些无一不展示了海尔冰吧人性化的设计思路。
The design of programming part related to the mode of intelligent control system can realize the precision control to multi-points temperature by simulation analysis in computer.
第二部分软件设计，按智能控制系统的模式，实现计算机对多区温度的精确控制。
Mainly on the automatic control system for greenhouse design, on the temperature, humidity, light intensity of the principles and methods of measurement.
主要介绍了对温室大棚自动控制系统的设计。阐述了温度，湿度，光照强度的测量原理和方法。
The program design and hardware structure of temperature centralized monitoring and decentralized control system for many oil-immersed transformers are introduced.
介绍了多台油浸式变压器温度集中监视分散控制系统的硬件结构和主要程序的设计。
The design of an expert fuzzy control system which applies expert system theory and fuzzy control theory to temperature control process is described.
将专家系统和模糊控制的理论应用到温度控制过程中，介绍了这类专家模糊控制系统的设计方法。
The design of a CAN based computer control temperature system is introduced.
并设计一基于CAN总线的计算机温度控制系统。
This paper introduces the operational principle, composition and features, the software design and etc. of the automatic temperature control system of disinfect machine.
介绍了消毒机温度自控装置的工作原理、组成及其特点和软件设计等。
This paper states the temperature stress and load value, puts forward the conformation measures of crack control in structural design and construction.
本文论述了温度应力、温度荷载的取值，并根据实际情况提出了结构设计和施工时裂缝控制的构造措施。
The design of Air-condition temperature control system based on MCU of is introduced in this paper.
本论文介绍了“基于单片机的空调温度控制系统”的设计及其相关内容。
Incorporating of multiple design means such as modularization, amplitude equalization and temperature control, the transmitter has high reliability and strong environment adaptability.
该发射机通过采用模块化、幅度均衡、温度控制等设计手段，使之具有较高的可靠性及环境适应能力。
This paper introduces the design of common intelligent temperature control instrument based on PROFIBUS- DP filed bus.
本文介绍了基于PROFIBUS-DP现场总线的通用智能温度控制仪表从站的设计方法。
The methods to reduce the machine tool thermal deformation are: thermal error modeling and compensation, temperature control, optimization design of thermal state characteristics.
减少机床热变形的方法为：进行热误差建模和补偿，温度控制，热态特性优化设计。
Specially the characteristics of dam construction method, design of dam section, concrete mix, construction technique and temperature control are discussed.
特别对筑坝方法特点、断面设计、混凝土配合比、施工工艺和温度控制进行了论述。
This composition expounded an ordinary calligraphy and a design way of chip microprocessors control system. The composition introduced a practical temperature control system of chip microprocessors.
本文阐述了单片机在线控制系统的一般模式及设计方法，并给出一种实用的单片机温度控制系统。
This paper is belonging to the design and research category of constant temperature control system.
本论文属于恒温控制系统的设计与研究范畴。
Based on the theory of value engineering and control to adiabatic temperature change of mass concrete, it is proposed four-functions principle for design optimization of GHPC.
根据价值工程理论，提出了基于大体积混凝土绝热温升控制的绿色高性能混凝土(GHPC)优化设计的四功能准则。
Utilize the theory of laser conducting among skin and use infrared sensor to detect the skin temperature, design the laser operation temperature control model to improve the safety of laser operation.
利用激光在皮肤中的传导及应用红外传感器探测皮肤温度的原理，设计激光美容手术温度控制模型，控制激光手术安全。
This paper introduces a design of Collecting-Distributing Central air-conditioning Temperature Control system based on CAN Bus.
本文介绍基于CAN总线的集散式中央空调温控系统设计与实现。
This paper introduces the design of the fuzzy control node of temperature in greenhouse based on a MCS196 Micro - computer and the component of the greenhouse control system.
介绍了一种利用MCS196单片处理机实现的温室温度模糊控制节点的设计及温室控制系统的组成。
It introduces a design and implementation of constant temperature control system which based on L4960 single chip switching integration manostat and AD590 temperature sensor.
介绍了基于单片开关式集成稳压器l 4960和温度传感器ad590的一种恒温控制系统的设计和实现方法。
It introduces a design and implementation of constant temperature control system which based on L4960 single chip switching integration manostat and AD590 temperature sensor.
介绍了基于单片开关式集成稳压器l 4960和温度传感器ad590的一种恒温控制系统的设计和实现方法。
应用推荐