The design of hardware circuit is explicated and the diagram of program is offered.
详细描述了硬件电路的设计，并给出了软件程序框图。
The operational principle, main features, the design of hardware circuit, the design of software program are expounded in detail.
具体阐述仪器的工作原理、主要特点、硬件电路设计和软件设计。
During the design of hardware circuits and printed circuit board, we take a series of measures to design the reliability of the system.
在硬件电路设计和印刷电路板设计过程中，采取一系列措施对系统进行了可靠性设计。
The design method is briefly introduced in the thesis, including the selection of hardware parts, the design of hardware circuit and software.
文中简要介绍了嵌入式系统的设计方法，包括硬件选型，硬件电路设计及软件设计方法。
This paper is limited only to the development of CPU module, including the design of hardware circuit and the algorithm implement of software.
本课题的主要内容是研制CPU模块，包括硬件的设计和软件的算法设计和实现。
The design of hardware circuit is introduced, include DC-DC main circuit, DC-DCs sample circuit, DC-AC main circuit and DC-AC's sample circuit, and so on.
本文首先给出了一个整体的设计方案及其工作原理，并介绍了各个部分硬件电路的实现，包括DC-DC主电路、DC-DC的采样与给定、DC-AC的主电路以及DC-AC的驱动与采样等。
An Electric power parameters measuring device based on MSP430F149 was introduced. The design of hardware circuit and software of the device was introduced.
介绍了基于MSP430F149单片机的电力参数检测仪，给出了电力参数检测仪的硬件电路、软件设计方法。
The operational principle and the design of hardware circuit and software of a simple and practical microcomputer interfacing circuit for flow detecting are introduced.
介绍一种简单实用的流量检测微机接口模板的工作原理、硬件电路及软件设计。
In this paper the structure, operating principle, the design of hardware circuit and the feature software of the 24-bit photoelectric shaft encoder are expounded systematically.
阐述了24位光电轴角编码器的结构、工作原理、硬件电路设计处理过程和软件编程特点。
This paper introduces PC control approach of joint motion of manipulator. This approach includes driving of stepping motor, interface design of hardware circuit and software programming.
介绍一种机械手关节运动的PC机控制方法，它包括步进电机的驱动、硬件接口电路的设计、软件的编程方法。
Through using 16-bit freescale MCU embedded CAN controller as master chip in each node, it achieved the design of hardware circuit, so realized CAN physical layer and CAN data link layer.
各个节点设计上采用内置CAN模块的飞思卡尔16位单片机作为主控芯片来搭建硬件电路，以实现CAN总线的物理层和数据链路层。
In this paper, two aspects of design: on the one hand, the hardware circuit design, on the other hand, the system design process.
本文主要包括两个方面的设计：一方面是硬件电路的设计，另一方面是系统程序的设计。
On the basis of discussing the reliability theory by total distributed control systems, it puts forward the reliability design of series hardware circuit.
在简要论述集散型控制系统可靠性理论的基础上，提出放大器硬件电路的可靠性设计。
Deep research into DSP technology and computer bus technology, design the hardware and circuit interface of PC and DSP.
深入探讨了DSP技术和计算机的总线接口技术，设计了PC及DSP的硬件电路接口。
The paper also design some specific hardware interface circuit to explain its word principle. And also explained program chart of dyeing machine blow head in the application.
本文还设计具体的硬件接口电路，说明其工作原理，给出应用于染色机喷头控制系统的程序流程。
The system framework, hardware circuit design and software design of digital flowmeter are presented in the paper.
本文介绍了数字式流量计的系统总体结构、系统的硬件电路设计和系统的软件设计。
This paper discusses the design method of signal conditioning circuit and Compensating technology of measuring error in using hardware and software for the pressure sensors.
介绍压力传感器的信号调节电路设计方法和测量误差的软、硬件补偿技术。
The design of CAN bus hardware interface circuit based on SJA1000, the selection of chips, the design of software and the realization of CAN communication are expatiated.
论述了基于SJA1000的CAN总线的硬件接口电路的设计、芯片的选择、软件设计及CAN通信的实现。
Hardware include the whole programming of circuit, design, anti-jamming circuit, principal chart of circuit, the circuit board of PCB, jointing the circuit, debugging and assemble the system.
硬件设计包括电路的系统规划、设计、抗干扰电路的设计、原理图的绘制、PC B电路板的制作、电路的焊接、电路的调试以及整个系统的组装。
The hardware and software design methods of the counter interface circuit were put forward. And the circuit debugging has been carried on.
提出了计数接口电路的硬件和软件设计方法，并进行了电路调试。
In this paper, the specific hardware and software design, a circuit board and components of the welding, the debugging process.
文中介绍了具体的软硬件设计，进行了电路板和元器件的焊接、程序的调试。
This article introduces the algorithm of DDS and the principle of hardware design in detail and gives out the circuit diagram, the principle of software design and the flow chart.
详细介绍了DDS算法和硬件设计原理，给出了电路原理图，软件设计原理及流程图。
This article introduces the principle, hardware circuit and software design of cam shaft detector.
介绍了凸轮轴检测仪的原理、硬件电路及软件的设计。
This paper introduces property and feature of PIC16C711, analyses theory of measure distance by ultrasonic wave, gives hardware circuit and software design of range finder for back a car.
介绍了PIC 16C711的性能和特点，分析了利用超声波测距的原理，给出了应用pic 16 C 711设计汽车倒车测距器的硬件电路和软件设计。
It introduces the working theory of AC manostat of compensated transformer mode, the design of the hardware circuit and the function of the software.
介绍了补偿变压器方式的交流稳压器的工作原理、硬件电路的设计和软件的功能。
On this basis, the function and design of every hardware circuit unit are proposed in detail.
在此基础上，详细介绍了各硬件单元电路的功能和电路设计。
Analyze the hardware structure of functional modules and then design the relative hardware circuit.
分析了功能模块的硬件结构并设计相应的硬件电路。
In this paper, the operation principles of the total system and power-amplifier circuit, design method of digital PWM hardware circuit and software are described, and.
文中着重阐述系统和功放电路的工作原理、数字脉宽调制器的硬件电路、软件设计方法，并给出实验结果。
In part of hardware design, voltage and current sampling circuit, IGBT driving circuit communication and man-machine interface circuit are designed.
在硬件设计中对电压、电流采样电路，IGBT驱动电路以及通讯和人机接口电路进行了设计。
In part of hardware design, voltage and current sampling circuit, IGBT driving circuit communication and man-machine interface circuit are designed.
在硬件设计中对电压、电流采样电路，IGBT驱动电路以及通讯和人机接口电路进行了设计。
应用推荐