The stability properties and control synthesis for a class of switched systems with input-delay, as well as a feedback controller design technique for such systems are investigated.
研究了一类具有输入时滞的切换系统的稳定性分析和控制综合，提出了一种状态反馈控制器的设计方法。
The design of stochastic optimal controllers of networked control systems with output feedback is also presented.
讨论了网络控制系统在输出反馈情况下随机最优控制器的设计；
The design of flyback switching transformer and feedback control loop and the improvement of the circuit for considering electromagnetic compatibility are the critical technologies.
反激式开关变压器和反馈控制回路设计，以及考虑电磁兼容性对电路的改进，是其关键技术。
The characteristic of design is to adjust the sending rate according to the feedback control function.
设计的特色之处是根据丢失率反馈控制函数来调整发送速率。
In this paper, for discrete singular systems, the structural properties and design methods of regularity feedback control have been discussed by transfer function.
本文用传递函数方法讨论了离散广义系统正则反馈控制的结构性质和设计方法。
The problem of robust controller design for dynamic output feedback networked control systems with uncertain time-delay is studied.
研究了具有不确定时延的动态输出反馈网络控制系统鲁棒控制器设计问题。
And two methods of optimal control and pole disposition is used in design on feedback law.
在反馈规律设计中采用了最优控制和极点配置二种方法。
Decentralized state feedback control design for a class of large-scale interconnected non-affine nonlinear systems with bounded disturbances is given.
对带有界扰动的一类大型互联非仿射非线性系统进行了分散状态反馈控制设计。
In this paper, the design objective for the feedback control system is determined via the analysis of vibration characteristics of vehicle vibration systems.
通过对车辆振动系统的振动特性分析，确定出系统反馈控制的设计目标。
The intelligent method based on performance feedback and parameter self-tuning controller based on rules have been proposed, which simplify the design of intelligent fuzzy control algorithm.
提出了性能反馈的智能控制方法和基于规则的控制器参数自调整机制等智能控制策略。并简化了智能模糊控制算法的设计。
At the same time, constant power control of flow compensating feedback is adopted in the design of control circuit. Work principle and output characteristics of the system are analyzed.
同时在控制电路设计上引入流量补偿反馈的恒功率控制，并分析了系统的工作原理及输出特性。
In order to resolve the shortage, the thesis chooses the linear quadratic form optimal controller design scheme by applying linear state feedback control of the modern optimal control theory.
针对这种不足，选择现代控制理论中的线性状态反馈控制方法，采用了线性二次型最优控制器设计方案。
To improve tracking and disturbance rejection properties, the input state and input output feedback linearization methods are used to design the control laws of a boiler turbine system.
为提高锅炉-汽轮机系统的信号跟踪和抗干扰能力，利用输入-状态反馈线性化和输入-输出反馈线性化方法分别设计了锅炉-汽轮机系统的控制律。
In this paper, the design of a feedback compensation control system for reaction wheel of torque mode is introduced.
介绍了反作用飞轮力矩模式反馈补偿控制系统的设计。
Based on the theory of variable pole state feedback control, this paper makes the process design and implement of NC software and hardware on electro-hydraulic force servo system.
基于变极点状态反馈控制理论，对电液力伺服系统进行了数控软硬件的工艺设计及其实现。
Quite a lot of result data from systematic virtual feedback control experiments are processed and provide design advices and reference for construction of the feed support system for FAST.
通过对大量的系统的虚拟反馈控制实验的结果进行对比和整理，本文工作为FAST馈源支撑系统的方案设计提供了建议和参考。
The goal of this paper is to design and implement a system that use automation feedback control solution to improve the automation integration in semiconductor Etch area.
本文的研究目标是实现在半导体蚀刻区通过自动化反馈控制系统来提高生产的自动化程度。
A new modeling and design method for the parameter optimization of the feedback control loop of switching regulators is presented.
本文建议一种开关调节系统控制回路参数最优化的建模和设计方法。
Accordingly, the principle of output feedback is used to design an optimal control law for the system in terms of a reasonable performance index.
在此基础上，应用输出反馈原理和合理的性能指标函数设计出系统的最优控制律。
To obtain the ability to perform analysis and design of linear feedback control systems, using both time and frequency domain techniques.
获得能够利用时域和频域技巧，分析和设计线性回馈控制系统的能力。
In this paper, decentralized state feedback control design for a class of large-scale interconnected nonlinear systems with mismatched interconnections and bounded disturbances is given.
本文对带有界扰动的一类含非匹配互联项的人型互联非线性系统进行了分散状态反馈控制设计，通过子系统状态的线性变换，得到分散状态反馈控制律。
By introducing new design parameters such as control move damping coefficient and state feedback weighting fact, the poles of the closed loop predictive control systems can be assigned arbitrarily.
通过引入控制作用衰减系数及状态反馈加权系数，状态反馈预测控制系统的极点可任意配置。
The theory and design method of state-feedback integral control technique for inverter are introduced particularly after analyzing the continuous and discrete models of the single-phase inverter.
在分析了单相逆变器的连续时间和离散时间模型之后，详细介绍了逆变器的增广状态反馈控制的原理和设计方法。
There is description on the design principle of power regulator, circuit drawings for main and control feedback circuits.
阐述了调功器的设计原理、主回路和控制回路的电路图。
The problem of controller design is discussed for unity-feedback control systems satisfying steady state performance.
讨论了单位反馈控制系统在满足稳态特性条件下的控制器设计问题。
In this paper, a new design method of robust predictive control, predictive quadratic stability controller, is proposed based on GPC state feedback.
基于广义预测的状态空间形式，提出了一种新的鲁棒预测控制设计方法—预测二次稳定控制器。
The design problem of a feedforward and feedback optimal control law is studied for linear systems affected by additive persistent disturbances.
针对具有外部持续扰动的线性系统，研究前馈反馈最优控制律的设计问题。
The use of sequential rely feedback tests for system try to obtain a more accuracy process model, to design PID controller method based on the internal model control principle is presented.
提出采用连续继电反馈实验辨识高精度的过程模型，基于内模原理设计PID控制器的方法。
The use of sequential rely feedback tests for system try to obtain a more accuracy process model, to design PID controller method based on the internal model control principle is presented.
提出采用连续继电反馈实验辨识高精度的过程模型，基于内模原理设计PID控制器的方法。
应用推荐