The utility of USB technology in the fourth generations numerical control logging system is introduced, the frame of application system and the design Microcontroller and USB controller is given.
介绍USB技术在第四代数控测井系统中的应用，给出USB应用系统的使用框图、单片机和USB控制器硬件电路的设计。
This article provides the design of multi-function intelligent horologe based on microcontroller, introducing the design of hardware and software in detail.
本文介绍了一种基于单片机的多功能智能钟表的设计，详细介绍了硬件和软件的设计。
In this paper, based on a microcontroller control of the fire alarm monitoring system design.
本文介绍了一个基于单片机控制的火灾报警监测系统的设计。
The design uses a microcontroller programmed to control its internal function blocks to achieve the purpose of measurement.
该设计采用单片机编程软件对其内部功能模块进行控制，从而达到测量的目的。
Introduces intelligent lighting network system, and sets forth the design of intelligent lighting controller based on ARM microcontroller LPC2104 in detail.
简单介绍了网络化的灯光控制系统，具体阐述了以ARM微控制器LPC 2104为核心的智能灯光控制器的设计。
In this article, the detailed introduction is shown about design and implementation of oil concentration detector based on microcontroller.
本文详细介绍了基于微控制器的水中油含量检测仪的设计与实现。
Design a data collection module with serial port based on microcontroller. The thesis explains the circuit principle and program designing in detail.
设计了一个串口通讯的单片机数据采集模块，文中详细阐述了模块的电路原理和程序设计。
At the same time I Microcontroller Division also specializes in product design and control development.
同时我司还专业从事单片机控制产品的设计与开发。
This article describes the development and design using AT89C51 Microcontroller Infrared Thermometer low temperature in the entire process.
本文介绍运用AT 89 C51单片机开发设计红外低温测温仪中的全过程。
According to the requests of automatic surfacing, USES microcontroller PIC16F877 to design a surfacing controller, which integrates condition controller with step motor drive.
根据平面自动堆焊的要求，采用单片机PIC 16f877，设计了集条件控制与步进电机驱动一体的堆焊控制器。
So in the paper we introduced a design proposal of wireless transmitting breathing rate detector based on AT90S8535 microcontroller in accordance with the principles of temperature sensor.
因此，根据温度传感器的原理，提出了一种基于AT90S8535单片机的无线传输的呼吸频率检测计的设计方案。
This course is an introduction to the design and programming of electromechanical systems based on imbedded microcontroller technology.
本课程介绍了基于嵌入微控制器技术的电机系统的设计和编程。
This article provides the design of muti-function intelligent horologe based on microcontroller, Introducing the design of hardware and software in detail.
本文给出了一种多功能智能钟的设计，详细介绍了硬件设计和软件的设计。
Intelligent lighting network system was introduced, with emphasis on the design of intelligent lighting controller based on ARM microcontroller LPC2104.
介绍了网络化的灯光控制系统，具体阐述了以ARM微控制器LPC 2104为核心的智能灯光控制器的设计。
This paper introduces the hardware design and the position control method of a valve positioner based on ARM microcontroller.
介绍了一种基于ARM的智能阀门定位系统的硬件设计和定位控制方法。
This paper introduces design of intelligent-learning infrared remote controller based on MSP430 microcontroller, and describes hardware structure and software of system.
介绍了一款基于MSP430系列单片机的智能学习型红外遥控器的设计方案，给出了该系统的硬件结构和软件组成。
Meanwhile, the paper has discussed the principals and design of step motor controller with the 8031 microcontroller in detail.
同时阐明了用8031单片机设计步进电机控制器的原理和实现方法。
The paper discusses the design porject and operation principle of the intelligent housing estate management system based on microcontroller.
介绍了以微控制器为核心的经济型住宅小区网络管理系统的设计方案和工作原理。
With the high performance of microcontroller and high resolution A/ D convert circuit , the design can guarantee high system accuracy.
由于采用了高性能的微控制器及高分辨率的A/D转换电路，保证了充电器具有很高的系统精度。
In this paper, the features of MC68HC11G5 microcontroller and the use in control system of automatic door are introduced, described emphatically the design of its hardware.
文中介绍MC 68hc11 G 5单片机的特性及其在自动门控制系统中的应用，重点阐述系统的硬件设计。
This paper introduces the function of the intelligent monitor and protection system of AC motor and the design of hardware and software based on 80c196kc embedded microcontroller.
介绍了智能化交流电机测控保护器的功能以及基于80c196K C单片机的系统硬件软件的的设计。
From the study of laser machining, design the CNC system based on the DSP and the microcontroller.
通过对激光加工特性的研究，设计了基于DSP与单片机为核心的激光加工数控系统。
This article introduces the design principle and structure of the electronic control car door safety system, which consists of a single microcontroller, a sensor and door closing machine.
本文介绍了一种以单片机、传感器和车门机为主要部件的电子控制汽车门安全系统的原理与结构。
Plan a soft combination, microcontroller do core with simple buffer circuit, can realize the design requirement, advantages, easy to adjust, flexible and can realize the function is very rich.
方案一软硬结合，单片机做核心加上简单的外围电路，可以实现设计要求，优点灵活多变，易于调整，可以实现的功能非常丰富。
The application condition and common design method of the design of anti disturbance of the airborne fire control system with microcontroller is given in this paper.
本文给出了微控制器航空火控抗干扰设计的适用条件及常用设计方法。
Finally, based on analyzing the working states of stand-alone PV generating systems, the design of the solar charging and discharging controller based on microcontroller has conducted.
最后在分析光伏离网发电系统工况的基础上，基于单片机进行了太阳能充放电控制器的设计。
This system use STC89C52 microcontroller as the core, through a combination of hardware and written of software program, achieve the design of general type liquid level measurement system.
本系统以STC 89c52单片机为核心，通过硬件电路连接和软件程序的编写实现通用型超声波自动测量物体液位系统的设计。
The design of Lower Computer includes the hardware circuit and microcontroller firmware programming.
下位机平台的设计主要包括硬件电路的设计和单片机的固件编程。
This paper introduces microcontroller lighting control system by the design.
本文介绍了通过单片机实现灯光控制系统的设计。
This paper introduces microcontroller lighting control system by the design.
本文介绍了通过单片机实现灯光控制系统的设计。
应用推荐