The software's design uses modular method to accomplish the system's functions, including data input, storage, manage, output etc.
软件设计采用结构化程序设计方法，完成了数据的输入、存储、处理、输出等功能。
From the engineering point of view, a design method for single input optimal regulator with preassigned closed-loop pole by inverse problem approach has been derived.
给出了从逆问题指定闭环极点设计最优调节器的方法，试图从工程角度解决单输入线性定常系统最优调节器的极点配置问题。
By this method, we can design a data acquisition system in which an alternating pulse serves as the input signal with a microcomputer.
采用这一新的方法，可用计算机设计输入信号为交替脉冲的这一类数据采集系统。
Based on anti input saturation technology, a design method of feedback linearization is proposed.
基于反输入饱和技术，提出了一种反馈线性化的设计方法。
This paper suggests a design method with information of the machined surface as the input and motion schemes of machine tools obtained through analysis.
提出以刀具类型和被加工表面的几何信息为输入，通过解析求解机床运动方案的设计方法。
This paper puts forward an analytic design method of the scheme of moving functions in a robot for machining, with taking the working surfaces and cutting tools as input information.
本文提出了一种以加工表面和刀具为输入信息，基于解析方法的切削加工机器人的运动功能方案设计方法。
Using this method researchers can directly input the original design data of the boiler and in a short time, obtain the output dynamic responses resulting from different disturbed inputs.
应用这种方法，研究人员只需向计算机输入锅炉原始设计数据，在短时间内即可得到各输入扰动作用下的输出动态响应结果。
The design method of the new controller was analyzed, the input and output variables of the neural network navigation controller were selected, the structure of the controller was also established.
分析了神经网络导向控制器的设计方法，选择了神经网络导向控制器的输入、输出变量，并建立了神经网络导向控制器的结构。
This paper proposed the nonlinear control design method with objective Holographic Feedbacks (NCOHF) that could solve the multi-objective control problems of the single input nonlinear control system.
针对单输入非线性控制系统，提出了一种目标全息反馈的非线性控制设计方法(NCOHF)，以解决非线性控制系统的多目标控制问题。
The design process of implanting system of PDF417C code USES the new encoding method, and it realizes the process from the input data to the relevant PDF417C code.
PDF417 C码的生成系统设计过程中，将提出的新的编码方法应用于条码的编码方案中，实现了对于输入的数据生成相应的PDF417C条码的过程。
The key to this design is to achieve a simultaneous optimum noise match and a minimum input VSWR match by using the microwave series inductance feedback method.
设计的关键是采用微波串联电感反馈方法同时获得最佳噪声和最小输入驻波匹配。
The transient vibration is reduced further for safety problems by the input shaping technique which utilizes zero placement method in the frequency domain to design multi-hump robust input shapers.
输入整形技术采用频域的零点配置方法设计多峰鲁棒输入整形器用来进一步减小负载的瞬时振荡，保障安全作业；
Microprogramming is a design method applicable to the controller of digital system which has more input variables.
微程序设计是当数字系统中控制器输入变量较多时适用的一种设计方案。
A systematical method of fuzzy controller design is introduced based on the Popov stability criterion and proportion property of input to output of the fuzzy controller.
利用模糊控制器具有的输入输出比例特性及非线性系统的波波夫稳定判据，提出了在保证被控系统稳定的前提下模糊控制器的系统化设计方法。
This paper gives a design method of servo systems input signal, which is based on exact requires of stepping servo systems and combining of traditional form of input signal.
在基于步进化伺服系统输入信号的实际需求，结合传统伺服系统输入形式，采用曲线拟合的方法，提出一种既便于计算机实现，又可灵活调整的输入信号设计方法，并给出相关的证明。
Applying the extern feedback control method, we design two different control laws, and add the input control signals to the first and the third equations respectively.
应用外力反馈控制法，设计了两个不同的控制律，分别将控制信号加在第一和第三个方程上。
The novel design solved the problem of limited voltage swing range caused by bias voltage at input of the OPA and achieved higher bandwidth compared to ac coupled design method.
使用文中介绍的方法设计单电源运算放大器能巧妙地解决由偏置电压引起的信号摆幅受限的问题，有较高的动态范围，而且具有比交流耦合更高的带宽。
The optimum initial chirps are related to compensation configurations and input powers. A new method to design dispersion-managed soliton transmission systems by prechirp technology is given.
初始啁啾参量的大小与色散补偿的结构以及平均输入功率有关，并提出对采用预啁啾技术的色散管理孤子系统设计的新方法。
A simple and convenient Chinese character keyboard input method has been proposed in this thesis with a view to the process of design and development of Chinese character input method software.
本文着眼于汉字输入法软件在系统中的设计和开发过程，提出一种简单、方便的汉字键盘输入法。
For convenience of AIA design, the AIA design method based on the input impedance wide-band model of patch antenna is used in this paper.
为了方便设计有源集成天线，本文提出了基于微带天线输入阻抗宽带模型的有源集成天线设计方法。
The analysis of time history is an important structure of a main seismic design method, its primary problem is the input of seismic motion.
时程计算分析是重要结构物抗震设计的一个主要方法，输入地震动是地震时程计算分析的首要问题。
At last, a decoupling dual internal model controller matrix design method is proposed for multi-variable time-delay input-output system in industrial processes.
最后，针对工业过程中常见的多变量多时滞输入输出系统，提出了一种双内模解耦控制器矩阵的设计方法。
Meantime the relation between the residual and the control input is researched and an adaptive threshold design method is developed. So the method is applied to structure fault detection for...
同时，研究了残差与控制输入和故障程度的关系，提出了自适应检测阀值设计方法，并将其应用于歼击机的结构故障检测。
The method to design water resources input-occupancy-output (IOO) tables for 9 major river basins in China and water resources IOO model are presented in the paper.
首次提出了中国9大流域水利投入占用产出模型及中国9大流域水利投入占用产出表的编制方法。
The observer design problem for general nonlinear multi-input and multi-output system by nonlinear state transformation is studied. The observer design conditions and method are generalized.
研究一般的非线性多输入多输出系统状态观测器的设计问题，采用状态非线性变换讨论了这种观测器的设计方法及条件。
Have the text input method of the top-level design methods.
掌握文本输入法的顶层设计方法。
Have the text input method of the top-level design methods.
掌握文本输入法的顶层设计方法。
应用推荐