The math model and control system design after modeling are the base and key point to process control system analyses, design, debug and obtain the higher control quality.
掌握被控对象的数学模型和建模后控制系统的设计，是过程控制系统分析、设计、调试和获得较高控制品质的基础和关键。
This paper describes the methods of controlling the frame quality in terms of process design, mould design, control of deformation and defects from welding surface treatment, etc.
从工艺设计、胎具设计、控制焊接变形和缺陷、表面处理等各环节实行严格的品质控制，多年来生产出多种型号的车架全部为合格品。
In order to improve the quality of graduation project, we should put the quality management throughout the entire design process, and emphasis on overall quality management control in every stage.
将质量管理贯穿在毕业设计过程的全阶段，重视整个设计过程中各个阶段的全面质量管理监控，才能达到改善本科毕业设计质量的目的。
SHENMIE products from the style of design to the choice of raw materials, from a professional production and polishing process, to have strict quality control standards.
深美产品从款式的设计到原材料的选择，从专业生产及抛光加工，再到质量检验均有严格的标准。
This result has an important significance not only for the simplification of drinking ethanol process and the improvement of product quality, but also for the equipment design and process control.
这不仅对简化食用白酒等生产过程的工艺步骤并提高产品品质有重要启示，同时也对设备设计和过程条件的选择具有参考价值。
This paper introduces the the design checking, process, construction methods and quality control of capping beam and embraces hoop method.
文章介绍了抱箍法盖梁施工的设计验算、工艺流程、施工方法及质量控制。
Chapter V is about the quality control through the phases of system analysis and design, it studies the quality control process, quality control points and methods in these stages.
论文第五章为体系剖析设计阶段的质量控制研讨，研讨了需求剖析与软件设计阶段的质量控制流程，质量控制重点和方式。
Analyzed the influence of the plastic part injection molding process to part quality, introduced design of injection mold, mold parting structure design and mold temperature control design.
分析了塑件的成型工艺及模具注射成型对塑件质量的影响，介绍了浇注系统的设计，模具分型结构、模温控制的设计。
This work provides the theory and technique foundation for implementing process optimized design and quality control scheme of TA15 alloy connecting piece isothermal forging process.
上述研究为TA15合金连接件的等温锻造工艺的优化设计及质量控制提供了理论和技术上的支持。
The quality control of parts heat treated in the sealed box furnace is a system engineering, including design, control system of the furnace and heat treatment process as well as operating.
密封箱式炉热处理零件的质量控制是一个系统工程，包括炉子结构、炉子控制系统、热处理工艺以及操作，其中一个环节出问题都将影响热处理零件质量。
While the quality of engineering cost control effect is often influenced by many factors, the project, design, construction, completion and so on each process would affect the level of the cost of.
而工程造价制约效果的好坏常受到多方面因素影响，立项、设计、施工、竣工等每个过程都会影响到造价的高低。
Study of the dynamic output characteristics of arc welding power supply is of great significance for optimization of welder design, control of welding process and improvement of welding quality.
弧焊电源的输出动态特性的研究，对优化焊机性能、焊接过程控制和改善工艺效果有重要意义。
The requirements of process and quality control of materiel packaging design was intro- duced.
概述了军品包装的设计开发程序和过程控制要求。
The paper mainly elaborates how to put in practice quality control about measure process. in order to quality require of measure in design and production.
本文主要阐述如何对测量过程实施质量控制以保证设计、生产对测量的质量需要。
While in China this technology is located only in fumble period, it is not be formed a complete design method, construction process and the corresponding quality control standard.
为使该技术在工程中得到推广应用，对沥青路面现场冷再生技术的设计、施工工艺、质量控制进行了初步研究。
The quality of CT diagnosis depends on the quality of scanning which is related to accurate scanning design and quality control on work process.
而CT扫描工作的质量与准确的CT扫描设计和CT工作流程质量控制息息相关。
This paper introduces the structural design, raw mater ial selection, manufacturing process, property test and quality control method for contact rail protective cover board for Tehran Metro project.
本文介绍了地铁接触轨防护罩的结构设计、原材料选择、制造工艺、性能检测、质量控制等。
Design quality control, we must first understand the product development process and management style, and quality of the final evaluation criteria.
控制设计质量，就要首先了解产品的开发流程和管理模式，以及最后评判质量的标准。
However, it focus on post-management, such as strengthening quality management and improving labor productivity, and is lack of control cost in design process.
但成本控制重点在事后管理上，加强质量管理、提高劳动生产效率等下游取得了很好的控制，但设计阶段的成本控制不足。
Once more, the third chapter, in the preliminary design process, the use cause and effect chart analytic method, searches the preliminary design stage quality control the key point.
再次，第三章，在初步设计过程中，利用因果图分析法，查找出初步设计阶段质量控制的关键点。
The selection and calculation of process parameters, die design and quality control are studied.
研究了工艺参数选择计算、模具设计和质量控制。
We follow the foundry process rigorous, and strict production quality control, to provide mold design, blank casting, heat treatment, machining quality for customers.
我们遵循严谨的铸造工艺流程，并依靠严格的生产制造品质管控，为客户提供模具设计制作、毛坯铸造、热处理、机械加工等优质的服务。 鲽。
It points out that as long as seriously control the quality of board, unified design standard, earnestly operation during construction and improved fitting process, t...
指出只要严格控制板材质量、统一设计标准、施工中认真操作、改进装修工艺，轻质条板墙体裂缝是可以解决的。
Methods To optimize the extractive process by orthogonal design and take Baicalin as the content index. The quality control methods was established.
方法以君药黄芩中黄芩苷的含量作为评价指标，通过正交试验筛选出合理的提取工艺，并制订质量控制标准。
The forming process of the auto perspex shelter against light and rain and the design of the mould were introduced. And a discussion was made on the product quality control.
介绍了汽车晴雨挡等产品的成形工艺、模具设计，并对产品质量控制进行了讨论。
In order to use the control chart to control the process quality economically and reasonably, the most important task is to design an economical control chart and to make use of it economically.
经济合理地利用控制图进行成组生产工序质量相对控制，必须先设计出经济控制图，并经济地运用控制图。
OEM orders stars with drawing design, process producing, quality control and obeying the whole clause of ERP company management system through the process.
本公司有着从绘图设计、生产加工、品质检验及ERP企业管理系统等规范专业的生产管理流程。
Therefore, the proposed model and results can lay the foundation of the quality control and process design of the rolling process for CP steel.
本构方程、动态再结晶模型能为科学设计和有效控制CP钢的热加工工艺提供依据。
Emphasis is on prevention through quality engineering and design, and goes beyond traditional statistical process quality control.
比较采取传统的统计程序质量控制方法，重点讲授如何通过质量工程和设计预防出现质量问题。
A quality control process model based on milestone and process key-point monitoring was presented, and the method to ensure collaborative design quality was also provided.
提出了基于里程碑和过程同步点监控相结合的协调式质量控制过程方法与模型；阐释了协同设计质量信息的内容与特点，建立了质量数据管理模型。
应用推荐