A type of screw and nut with coarse pitch was applied to realize thread core demoulding automatically.
采用螺距粗的螺丝和螺母实现螺纹型芯自动脱模。
A two-step demoulding mechanism was also introduced.
该模具采用潜伏浇口型腔板-推杆二级脱模机构。
By production, the ideal demoulding effect of was acquired.
经生产验证，达到了理想的脱模效果。
In the electronic products used as demoulding agent of electronic components.
在电子产品中可作电子元件的脱模剂。
The glass walls of the mould were covered with a fine layer of a grease demoulding agent.
玻璃幕墙的模具涵盖罚款层油脂脱模代办署理人。
Applicable to a variety of mold release, maintenance and cleaning, easy to use, Demoulding effect.
适用于各种模具的脱模，保养和清洁，使用方便，脱模效果好。
These products are widely used in large Bridges and sleeper demoulding craft such as cement products.
本产品广泛使用在大型桥梁及轨枕等水泥制品脱模工艺上。
The structure of the injection mould with automatic thread demoulding by the chain gear transmission is given.
给出了链轮传动自动脱螺纹注塑模结构。
The safety demolding system is designed for main core demoulding from the NEPE high-energy rocket motor in safety.
安全脱模系统是为了解决NEPE推进剂装药发动机主芯棒脱模而研制的专用设备系统。
Particularly suitable for large span bridge structures and cross-section complicated concrete component demoulding.
尤其适用于大跨度桥梁构件及断面复杂的混凝土构件脱模。
There are four mould cavities and the gear-rack mechanism for the rotational automatic thread demoulding on the mould.
该压铸模一模四腔，带有齿轮-齿条传动旋转自动脱螺纹型芯机构。
Importantly, the design critical points of demoulding mechanism in the structure of cone - thimble injection mold are stated.
重点阐述了锥形套注射模结构中脱模机构的设计要点。
The utility model provides a demoulding device of a powder press moulding machine, belonging to the mechanical technical field.
本实用新型提供了一种粉末压模机的脱模装置，属于机械技术领域。
Thread demoulding mechanism, injection system, protect mechanism of thread rotation and temperature control system were designed.
设计了螺纹脱模机构、浇注系统、螺纹转动保险机构和温度控制系统。
The whirly demoulding mechanism designs of shape-gear and the whirly plastic parts of bevel gear injection mould were introduced.
介绍了斜齿轮塑件注射成型模具的齿形型腔旋转式和斜齿轮塑件旋转式两类脱模机构设计。
Fabricating and demoulding of the base mould is a key during the course of construction for precast plate girder of highway bridge.
公路桥梁预制钢筋混凝土板梁施工中，底模的制作及脱模是关键。
Blade positioning, workpiece demoulding and slipping caused by welding deformation are solved. The production efficiency is increased.
解决了叶片定位、工件脱模、焊接变形引起的滑移难题，提高了生产效率。
And the mechanisms of forced demoulding, two_time ejection and delayed ejection by a sliding core used in the injection mould were introduced.
分析了沐浴露瓶盖的工艺特点，介绍了瓶盖注射模的结构及工作过程，并介绍了注射模设计中采用的强制脱模、二次顶出、滑动型芯延时顶出机构等。
Mould the base body in the mould, and lay on the cutting trolley for demoulding after turning the cast mould over 90 degree by the upset hoist.
在模具内浇注预养好的坯体，由翻转吊装机构将模具整体经空中翻转90度后放置于切割小车上进行脱模。
The demoulding device of the powder press moulding machine is characterized by simple structure, easy adjustment, good stability and high precision.
本粉末压模机的脱模装置具有结构简单、容易调整、稳定好、精度高的特点。
The preparation method is simple, has small equipment tonnage required, short demoulding time and low cost, and has no strict requirement on the die.
本发明制备方法简单、所需设备吨位小、脱模时间短、对模具没有严格要求及成本低廉。
Scaffolding rods are formed by perfusion, cooling and demoulding, and the scaffolding rods made by the scaffolding rod forming machine has wide market.
经灌注、冷却、脱模而成型，该成型机制出的棚杆，具有广阔的市场。
The working process of steel ball secondary demoulding mechanism is introduced, and the key issues required attention on design and processing are stated.
介绍了钢球式二次脱模机构的工作过程，并对设计及加工过程中需要注意的一些关键问题进行了阐述。
The factors that influence selection of hydraulic cylinder were analyzed, for example strong demoulding force, mold clamping force, hydraulic cylinder strobe.
分析了影响液压缸选用的主要因素如脱模力、锁模力、液压缸行程。
An ejection system was designed in the side core_pulling mechanism to improve the moulding quality and avoid deformation of the plastic part during demoulding.
在侧抽芯机构中设计出一种顶出机构，改善塑件的成型质量，防止塑件脱模时的变形。
A demoulding structural design by the cooperation of core and dual-cone is introduced, and the structural character and manufacture process are analyzed as well.
介绍了一种型芯与推板双锥面配合脱模机构设计，分析了结构特点及制造加工工艺性。
The composite green body is characterized by sufficient strength for demoulding, high density homogeneity, appropriate porosity and little dimensional change rate.
坯体具有足够的脱模强度、较高的密度均匀性和合适的孔隙率以及尺寸变化率小等特点。
Through analyzing of a bottle cover structure with inner thread, a type of screw and nut with coarse pitch was applied to realize thread core demoulding automatically.
通过对一种带有内螺纹的酒瓶盖的结构分析，阐述了采用大导程螺杆和螺母机构实现螺纹型芯自动旋转脱模的设计过程及其工作过程。
The machine is combined with pneumatic, mechanical and drive to achieve automatic continuous working of feeding sheet, forming, demoulding, ection cutting and stacking.
采用气动、机械、电气相结合、实现送塑、成型、脱膜、分板切断、堆垛等自动化连续工作。
The pneumatic demoulding soft sweet mould of the utility model has the advantages of high productive efficiency, flatness, smoothness, easy production, high automation, etc.
本实用新型的气动脱模软糖模具具有生产效率高、产品平整光滑、易生产自动化等优点。
应用推荐