Segmentstion is characteristic in the Ziyun deformation zone.
紫云变形带上的分段运动特点十分显著。
A calculation method of the flattening in sheet rolling deformation zone, using influence function, was derived.
采用影响函数法推导了薄板轧制时变形区内轧辊弹性压扁的计算式。
From the plastic flow theory, the three-dimensional deformations and stresses of the deformation zone are formulated.
根据塑性力学流动理论，分析推导了变形区三维变形和应力的数学模型。
This already became an important feature and universal laws of ore-control in the shear deformation zone in the area.
此已成为该区剪切变形带内控矿的重要特征和普遍规律。
In addition, the distribution characteristics of mean stresses and mean strains in the deformation zone have been investigated.
同时，对变形区内的应力应变分布特征作了较详细的分析。
The temperature field of the bar in and out the deformation zone during continuous rolling is simulate by finite element method.
采用有限元法分析了棒材连续热轧中变形区及出变形区时轧件横断面温度场。
The maximum tool effective stress is located in the flank face near cutting edge and the shear deformation zone on the workpiece.
最大刀具等效应力出现在前刀面上切削刃的周围，工件上最大等效应力出现在第一变形区。
The middle Xuefeng mountain is a regional shear deformation zone, there are many Au deposits which connect with the shear zone in the district.
雪峰山中段为区域性剪切变形带，区内分布了众多与剪切带有关的金矿床（点）。
In this paper, an analysis has been carried out on the Kangding earthquake deformation zone, along the southeast segment of Xianshuihe fault belt.
本文对鲜水河断裂带南东段，康定断裂地震的形变带进行了分析。认为，地震形变带主要由发育于地形斜坡上的线性坡中槽或垄岗组成。
Whole weldment includes practically elastic deformation zone, compressive plastic deformation zone, tensile plastic deformation zone and melting pool.
整个焊接板由弹性变形区、压缩塑性变形区、拉伸塑性变形区和熔池组成。
The foundation mechanisms and influence factors of oil film in deformation zone were studied by calculations and experiments in cold rolling aluminum sheets.
通过计算分析与轧制实验，探讨了铝材冷轧变形区油膜形成机理及影响因素。
The distribution of stresses and strains in the deformation zone under roller dies drawing is different from that under fixed rolls drawing, but tends towards rolling.
辊模拉拔变形区内的应力应变分布特征完全不同于固定辊模拉拔，而倾向于轧制过程。
To general problem of the slab head bending in rolling, the effect of geometric shape coefficient of the deformation zone and entry Angle on head bending is researched.
本文针对中厚板轧制过程中因头部翘曲而影响产品质量和产量这一生产中普遍存在的问题，研究了变形区几何形状系数和送入角变化对轧件头部翘曲的影响。
There is a gradual decrease in tectonic superimposed hydrostatic pressure from compressional deformation zone through shear deformation zone to extensional deformation zone.
处在挤压变形带、剪切变形带到引张变形带(及地域)中岩石所承受的构造附加静水压力有逐次变小的规律性。
The various methods of measuring the film thickness of the deformation zone in rolling are studied and a new "heating 'method of measuring the film thickness are developed."
就轧制变形区油膜厚度的不同测试方法进行了对比研究，提出了简便、实用的加热退火法。
This model firstly judges how to choose a right curve of rolling speed, then calculate the Max rolling speed and entering speed according to the parameters in deformation zone.
此模型判断如何选取轧机速度曲线图，首次提出根据轧制变形区各参数来计算不同压下量下的最大轧制速度以及咬入速度。
In the longitudinal section, it can be divided into port deformation zone, transition zone and undeformed zone along the z-axis, according to the morphology of deformation zone.
在纵截面上，根据变形区形态，可沿轴向将变形区分为端口变形区、过渡变形区和未变形区。
The Mannesmann barrel-shaped rolls can be designed arid processed easily, but it makes the non-linear deformation zone in skew-rolling and leads to the inhomogeneous wall thickness.
曼乃斯曼桶形轧辊设计简单，加工方便，但形成非线性的斜轧变形区，导致壁厚不均。
Linear deformation zone of generating wall can be obtained by means of non-linear cone Angle plug combined with the barrel-shaped rolls, so the wall accuracy can be increased greatly.
采用带有非线性顶头锥角的顶头与桶形辊相配合可以获得线性的成壁变形区，从而大大提高壁厚精度。
Based on the field investigation data, the Wusuxiao seismic deformation zone characteristics and earthquake parameters along middle segment of Aerjin fault have been expounded in this paper.
本文根据现场考察资料，论述阿尔金断裂带中段乌苏肖地震形变带特征及地震事件参数。
The deformation pattern of ECSLE was investigated with grid experiment. The experiment result shows that the plastic deformation zone is a linear area between the two corners of die channel.
通过网格实验研究了等截面侧向挤压过程中材料的变形情况，结果表明塑性变形区仅位于模具通道拐点连线附近。
In order to acquire the local bending spring-back accuracy of sheet metal strip of a progressive die design, the thesis aims to build ironing depth simulation model in a bending deformation zone.
为解决级进模具使用的带料上的局部折弯回弹的精度问题，本文建立了折弯变形区的过压量模拟模型。
The strain in the deformation zone distributes very complicatedly in cross section. The metal exchange between web and flange takes place in alternative direction as the deformation is in progress.
结果显示，变形区内横截面应变分布非常复杂，腹板和翼板间的金属交换在不同变形区域内发生方向变化。
On the basis of experiment and change of metal flow line, metallographic structure and micro-hardness in deformation zone, this paper researched process, characteristic and mechanism of fine-blanking.
通过实验和变形区流线变化、金相组织和显微硬度的变化，对精冲成形的过程、特点、精冲成形机理进行了研究。
Outside the strip zone, deformation is elastic.
在窄带区以外，变形是弹性的。
The rigid body motion of a struck ship in collision is delayed to a certain extent, compared with local damage deformation of collision zone.
船舶碰撞过程中，被撞船的刚体运动较之碰撞区的局部损伤变形而言，存在一定程度的滞后效应。
The rigid body motion of struck ship in collision is delayed to a certain extent, compared with local damage deformation of collision zone.
船舶碰撞过程中，被撞船的刚体运动较之碰撞区的局部损伤变形存在一定程度的滞后。
The rigid body motion of struck ship in collision is delayed to a certain extent, compared with local damage deformation of collision zone.
船舶碰撞过程中，被撞船的刚体运动较之碰撞区的局部损伤变形存在一定程度的滞后。
应用推荐