Plastic deformation pressure is the pressure caused by changing the status of rock from elasticity into plasticity.
塑性形变压力是岩石由弹性状态转变为塑性状态所产生的压力。
When buried depth is greater, leaving proper deformation space above the middle wall can effectively reduce the deformation pressure supported by the middle wall.
当埋深较大时，在中墙顶部预留适当的变形量，可以有效减小中墙承受的形变压力。
Torsion is the use of rotational pressure (torque) on a component. Twisting and torque and included in this category. Causes shearing, compression, and deformation of components.
扭曲是在部件上施加旋转的扭力。通常使部件被切断，压缩和变形，扭转和扭曲同属于此类别。
The purpose of the pipeline caliper is determined before the pressure pipeline existing lost round, wrinkles, indentation or other and degree of deformation of the pipeline through the ability.
管线测径的目的是在试压之前确定管道存在的失圆、皱痕、凹坑或其他变形的程度和管线的通过能力。
Pressure with brass called machining deformation of brass.
压力加工用的黄铜称为变形黄铜。
In the process of rolling, the movement of rolling sets decide the rolling pressure, the deformation of the spindly shaft and consequently the rolling quality.
在滚压加工工艺中，滚压套的压下量大小决定了滚压力的大小并决定了细长轴表面发生弹塑性变形的状况，从而决定了细长轴的加工质量。
Fracture genesis mechanism in ZJD area is analyzed from the aspects of abnormal pore fluid pressure in formation, local structural deformation, and fracturing etc.
从地层的异常孔隙流体压力、局部构造形变、断裂作用等多方面分析了ZJD地区裂缝的成因机理。
The monitoring project of Zhouning Hydropower station underground plant and water intake system including monitoring of the surrounding rock deformation, bolt stress, osmotic pressure and joint.
周宁水电站地下厂房及引水系统的监测项目包括围岩变形监测、锚杆应力计监测、渗透压力监测、测缝计监测。
With consideration of start up pressure gradient and media deformation, this paper studies vertical well production in low permeable reservoirs.
考虑启动压力梯度和介质变形的影响，研究低渗透油藏中直井产量的变化规律。
Change of earth pressure, pore water pressure, underground water level, surface deformation, and sub-surface movement all have direct relationship with distance between shield and testing section.
土压力、孔隙水压力、地下水位、地面变形及深层土体移动的变化都跟掘进机与测试断面之间的距离有直接关系。
The deformation and contact frictional force of elastomer pressure shear break are studied in proportion loading .
对比例加载时弹性体压剪裂缝的变形及接触摩擦力问题进行了研究。
Dynamic property of small deformation of thin walled elliptical bar under pressure was studied.
讨论受内压椭圆封闭薄壁截面杆的小变形动力学性质。
Some behaviors of saturated flyash such as pore water pressure, dynamic strength, and dynamic deformation are studied by the dynamic torsional shear test.
通过动扭剪试验研究饱和粉煤灰的动孔隙水压力特性、动强度特性以及振陷变形特性。
Rising of pore water pressure induced by some man-made factors intensifies the deformation.
一些人为因素引起的孔隙水压力升高，加剧了变形。
An optimum algorithm is proposed to solve the geometrically nonlinear problem of large deformation of a cantilever under pressure on free end.
提出一种解决几何非线性问题的优化算法，研究了悬臂压杆的几何非线性大变形问题。
It is shown that the new model can preferably depict the deformation, pore pressure variation and modulus damage of the saturated soft clay subjected to the cyclic loading.
结果表明，提出的模型能较好地描述饱和软黏土在循环荷载作用下的变形、孔压变化及模量损伤过程。
Punching is a kind of pressure process method that punching dies are used in press sheet to put pressure on the plastic deformation or separation, for a certain shape and size of components.
冲压是利用冲压模在压力机上对板料或热料施加压力使其产生塑性变形或分离，以获得具有一定形状和尺寸的零件压力加工方法。
Accounting for the characters that the permeabilities of deformable porous media vary with its deformation, the machamical model for forming one-dimensional pore pressure is established.
考虑到可变形多孔介质的渗透系数依赖于孔隙变形的特点，建立了一维孔隙压力生成的力学模型；
The differences between finite deformation and small deformation in such aspects as pressure field, displacement field and stress field are analyzed with different soil parameters.
实例分析了不同土性参数情况下有限变形和小变形理论在压力场、位移场和应力场等方面的差异。
The pressure proportional elastic deformation of this bourdon tube is transmitted through a low friction movement to the knife edge pointer.
波登管的压力比例塑性变形通过摩擦力很小的机械装置传递给刃形指针。
Particle penetrating direction has influences on the magnitude of surface deformation, contact pressure and stress, and the distribution forms of contact pressure and stress.
磨粒侵入方向不仅影响材料表面变形、表面接触压力和表层应力的大小，而且会引起压力和应力分布形状的改变。
Design principle of Obturation mechanism in high pressure is to avoid structural component from plastic deformation.
高膛压闭气机构的设计原则是避免构件发生塑性变形。
The article discusses the cause of deformation in the hydraulic test of pressure tubing and suggests some solutions on the basis of analysis.
阐述了耐压管水压试验变形的根本原因，在分析的基础上，指出了解决问题的方法。
According to Rankine earth pressure model considering deformation, the reduced coefficient of a passive earth pressure is explored theoretically.
根据考虑变形的朗肯土压力模型，对被动土压力折减系数进行了理论探讨。
Result showed that main reasons on ablation of roll bearing were transformation of forward Angle, flow value of cool water, water pressure, water pipe position, and deformation of roll-shell et al.
对造成轧辊烧轴承的原因进行了分析，结果表明：轧辊烧轴承主要与轧辊送进角的变化，冷却水的水量、水压及水管位置，轧辊架变形情况等有关。
Based on the mechanical principle, shell structures are designed such that improved stability and capacity under deformation earth pressure and impulse load can be achieved.
根据地面大跨度板壳原理设计出网壳结构，该结构稳定性强，能承受较大变形地压及冲击荷载。
Twins and dislocation movement are two important deformation characteristics of silver nano powder under high pressure shock wave.
孪晶和位错运动是纳米银在超高压冲压波作用下形变的两个重要特征。
Twins and dislocation movement are two important deformation characteristics of silver nano powder under high pressure shock wave.
孪晶和位错运动是纳米银在超高压冲压波作用下形变的两个重要特征。
应用推荐