The third case is due to the deformation of the transmission shaft caused by the imbalance, the general situation in the chassis collision over the car.
第三种情况是因为传动轴变形不平衡引起，一般这种情况出现在底盘碰撞过的车比较多。
By using experiment the nonlinear behaviour of the helicopter structure in the complex deformation case is obtained.
根据实验得到在复杂变形情况下直升机结构的非线性的特性。
In normal use case, if the KFC door if deformation, it is likely due to the use of aluminum alloy material quality difference and thickness lead.
在正常使用情况下，肯德基门若出现变形，很可能是由于使用的铝合金型材原料质量差和厚度过薄导致。
Based on a case study of the incision terrain at Ximayu, landslide erosion, forming characteristics, deformation and destruction characteristics are qualitatively analyzed.
以切层滑坡侵蚀实例，以西马峪滑坡侵蚀体为研究对象，定性分析了西马峪滑坡侵蚀体的形成与变形破坏特征。
Trough case study, detail signals of dynamic deformation of buildings above old mine goaf are obtained using multiscale empirical mode decomposition method.
通过实例研究，证实采用多尺度经验模态分解可获得老采空区上方地表建筑物的动态变形细部信号。
Because riveting technology is widely used to manufacture antenna case of phased array radar, deformation and relative position deviation are easy to be found.
相控阵雷达天线箱体的制造通常采用铆接成形技术，过程中易出现铆接形变和相对位置偏差等现象。
Study on deformation behaviours of soil under slow reciprocating loading is not often seen but in practical engineering there are many examples of such case.
慢速往复荷载作用下土变形特性的研究不多见，但实际工程中土受到慢速往复荷载作用的例子很多。
Volume effect is in the case of the plastic processing system with vibration, under this process the deformation resistance force of materials is reduced, and the deformation rate is risen.
一般认为将机械振动引入到金属的塑性成形加工中，不但可以降低材料变形时所需的外力，还能大幅度提高产品成形质量，这些效果的产生主要缘于体积效应的影响。
Technique issues such as clamping deformation, guarantee of hole position accuracy and plane seal, etc. for motorcycle case body and case cover are introduced.
介绍了摩托车箱体、盖加工中的装夹变形、位置精度和平面密封保证等方面的工艺问题。
Deformation observation of Guangzhou gymnasium steel roof truss is used as a case study in this paper and a survey scheme suitable for such project presented.
本文以广州体育馆钢结构屋架几何形变测量工程为实例，提出了一套适宜大型钢屋架的几何形变测量方案。
It is proved that the equality of deformation powers and the equality of strain energy in case of linear elasticity are deduced from the present theory.
文章论证了所述等效理论具有的形变功率等值性和线弹性条件下的应变能等值性。
Aiming at the disadvantages of experience formula, the case-based SVM method for maximal deformation forecasting of surrounding rocks of tunnels is proposed.
针对经验公式方法的不足，提出基于工程实例的隧洞最大允许变形的支持向量机(SVM)自动获取方法。
The lack of bonding was existed in the case of lower deformation rate.
当变形率较小时界面有未焊合存在。
The testing purpose, model design principle, testing case, loading program, strain and arrangement of deformation test point of the special-shaped arch bridge test model are introduced in detail.
介绍了该桥模型试验的目的、模型设计原则、测试工况、加载方案以及应变和变形测点布置情况等，给出了几个主要荷载工况下模型试验的主要结果。
Testing purpose, model design principle, testing case, loading program, strain and deformation test point arrangement of the first Zhongshan Bridge test model are introduced in detail.
介绍了该桥模型试验的目的、模型设计原则、测试工况、加载方案以及应变和变形测点布置情况等，给出了几个主要荷载工况下模型试验的主要结果。
Several particular situations in which the rate-form elastic constitutive laws can be approximately applied to the case of finite deformation are discussed.
文中还讨论了几种弹性本构律可以近似用于大变形描述的情况。
Under operation pressure, the 3 D deformation strain and stress of SRM grain with composite case is calculated.
对复合材料壳体的固体发动机药柱在工作内压作用下的变形和三维应力、应变进行了计算。
The large deformation formulae of filament wound case (FWC) are derived, and the finite element model of the FWC is established.
推导和建立了纤维缠绕壳体大变形有限元公式和有限元模型。
This paper introduces the measurement principle of Laser Alignment Automation Observation Instrument and its structure Characteristic, and gives a case study in Dam Deformation.
本文阐述了激光自动观测仪测量原理及结构特点，并且介绍了它在大坝变形观测中的应用。
It is one of the effective methods for detecting position of slip plane, measuring thickness of slidebody, finding slip direction, calculating slipspeed and judging deep deformation case of slidebody.
是测定滑坡体滑动面（带）位置、滑体厚度、滑动方向、滑速及判断滑体深部变形状态行之有效的方法之一。
But because the chamber pressure of this gun is high, the deformation of the steel cartridge case is enlarged, and the extraction ratio cannot reach the standard.
但由于该炮膛压较高，使得钢质药筒的变形加大，不抽筒率超标严重。
The calculated value coincides with the actual case within the range of the straight line in the curve of the load-deformation relationship.
该公式在荷载——变形关系曲线的直线范围内计算值与实际情况基本符合。
The forming process of rectangular case drawing is simulated and the rule of material flowing deformation in the process of drawing is analysed.
用有限元模拟矩形盒拉深成形过程并剖析拉深中材料流动变形规律。
In oil production, because of the influence of surrounding environment, case-pipes occur deformation, damage and corrosion which will affect regular production in an oilfield.
在油水井生产过程中，由于周围环境的影响，使套管发生变形、损坏和腐蚀，直接影响油田的正常生产。
Through analysis, we consider that the spiral case of left powerhouse units works normally, and that the stress and deformation are within the range of allowable design.
通过分析认为左厂房机组蜗壳工作性态正常，应力和变形均在设计允许范围内。
For matrix cracking and large deforming, the deformation of a filament wound case is analyzed and calculated.
本文分析计算了基体开裂及大变形对纤维缠绕壳体变形的影响，得到了比较满意的理论分析结果。
Meanwhile get the state of the stress and deformation of every crankshaft, analyze the case of the stress of crankshaft under different work condition.
同时得出曲轴各个轴承曲拐的应力应变状态，并分析了曲轴在不同工况下的受力情况。
A case study shows that this method is an available approach to investigate the mechanism of rock mass deformation and ground surface subsidence.
实践证明，所采用的综合研究方法是分析岩体移动和地表下沉机制的有效途径。
Debonding of reinforced particles from the matrix and cavitation of rubber particles, in the case of co-PP, ease plastic deformation and thus, reduce the scratch resistance.
对于共聚pp，基体材料中的填充粒子的脱粘和橡胶粒子的空化使塑料破坏更加容易，从而降低了耐刮擦性。
Debonding of reinforced particles from the matrix and cavitation of rubber particles, in the case of co-PP, ease plastic deformation and thus, reduce the scratch resistance.
对于共聚pp，基体材料中的填充粒子的脱粘和橡胶粒子的空化使塑料破坏更加容易，从而降低了耐刮擦性。
应用推荐