The regular 3D middle layer was driven by linear bones with section deformation method.
用截面变形法实现规则三维中间层在线骨骼驱动下的变形；
The axial deformation method was used to simulate the motion of robot fish in this paper.
采用轴变形方法模拟机器鱼的运动。
To implement the deformation method, the silhouette is involved to control the mesh model.
为了实现交互的变形操作，使用轮廓线对网格模型进行控制。
Based on the idea of bar deformation in mechanics of materials, a new deformation method is presented.
运用材料力学中杆件变形的思想，提出了一种新的变形方法。
Shot Peening(SP)is a typical severe plastic deformation method to produce ultra-fine grains of metallic materials.
高能气动喷丸是通过剧烈塑性变形产生细晶材料的方法之一。
The authors present a novel based on spline-driven free-form deformation method which adopts a simple 3d sketching technique and external-force constrain.
本文结合简单的三维绘制技术和外力约束方法提出了一种基于样条曲线驱动的自由变形方法。
Based on the Inteference-Energy method and Over-deformation method, the extensive Angle method is applied in the judgement of the stability of ground foundation pit.
在干扰能量法和超变形法的基础上，提出了基坑稳定评判的广角度综合评判法。
When the deformation method was used for concrete stress calculation, it was assumed that the stress increased suddenly at each stage, and such an assumption led to certain errors.
采用变形法计算混凝土应力时，假设应力在各个时段内以突变形式增加，并对这种假设带来的误差进行了分析。
On the basis of load transfer mechanism and destruction patterns of single pile, load transfer method and shearing deformation method for subsidence computing of single pile are mainly discussed.
在分析单桩的载荷传递机理、单桩的破坏模式的基础上，重点探讨了单桩沉降的载荷传递法和剪切变形法。
The stress characteristic of the interface, deformation rule under the action of load and the stress distribution rule were discussed by adopting the experimental research method.
采用实验研究的方法，探讨锚固体界面力学特征、在荷载作用下变形规律以及界面上的应力分布规律。
A calculation method of the flattening in sheet rolling deformation zone, using influence function, was derived.
采用影响函数法推导了薄板轧制时变形区内轧辊弹性压扁的计算式。
At the same time, analyze the welding deformation of straight-line segment model of side rail, and compare the results with test data, verify this method is efficient.
同时，针对汽车纵梁部分直线段模型进行焊接变形分析，并与试验数据进行了对比，验证了该方法的有效性。
Through this method, the large-scale dynamical displacement can be measured and the process of deformation in surface can be analyzed.
运用这种方法不仅可以测量大动态范围的面内变形，而且可以测量分析面内动态变形过程和变形速度。
Grinding wheel method has to be taken to avoid deformation during rework for think thickness material or strict dimension requirement parts.
对厚度较薄或要求外形尺寸严格的产品，返修时应采用砂轮打磨等方法，以防变形。
The structure and load form of the absorbing tower is complex and regular design and calculation method cannot give its distribution condition of the stress and deformation.
脱硫吸收塔结构及荷载形式复杂，常规设计计算方法不能给出其应力和变形分布情况。
To adopt white light digital speckle correlation method, so as to observe the coal body's deformation and destruction law in pick cutting course.
采用白光数字散斑相关的方法，观测截齿截割作用下的煤体变形破坏情况。
And there is also simplified method using modulus of deformation by considering constitutive model of soil to calculate settlement.
也有考虑土的本构关系，用其变形模量进行计算的简化方法。
Measured results indicate that the bend deformation and abruption phenomenon appears very quickly when the "two-bridge-junction" method is adopted in the parallel steel plate beam.
实测资料表明，上下行并行的钢板梁桥在采用“两桥连接”加固以后，平联杆件的弯曲变形和断裂现象急剧增多。
Based on construction practice, the paper analyzes deformation of railway embankment in permafrost zone in Qinghai-Tibet Plateau, centering on monitoring method for embankment deformation.
结合工程实例，简要分析在青藏高原多年冻土区修建的铁路路堤易遇到的变形问题，重点探讨路堤变形的监测方法。
Our method is based on the space deformation model called DOGME.
我们提出的方法是建立在名叫DOGME的空间变形模型的基础上。
Using an empirical cumulative plastic strain formula, a method for calculating the traffic load induced deformation was proposed.
针对交通荷载作用下软土地基的变形问题，采用累积应变的经验公式计算其累积沉降。
Based on the characteristics and the deformation destroying of high embankment, the main reasons for the deformation destroying are analyzed and the method to resolve the problem is suggested.
根据高填路堤的特点及其变形破坏的表现形式，深入分析了高填路堤变形破坏的主要原因，并提出了高填路堤变形破坏的处理对策。
The stress and deformation of crankshaft are calculated by finite element method with six load boundary conditions and three displacement boundary conditions.
分别采用六种载荷边界条件和三种位移边界条件对曲轴应力和变形进行了有限元分析；
A new method for analyzing the time-dependent convergence deformation of the underground surrounding rock is presented.
研究了地下洞室围岩的时间效应变形特性，提出了分析围岩时间效应收敛变形的一种新方法。
This method can be used to analyze accurately the complete load-deformation response of RC beams loaded in combined shear, moment, and axial load.
该法可以对在弯矩、剪力和轴力共同作用下的钢筋混凝土梁截面进行较为准确的荷载-变形反应全过程分析。
An approach for modeling rock crack propagation using discontinuous deformation analysis (DDA) method is presented.
提出一种用非连续变形分析方法模拟岩石裂纹扩展的方法。
Using the combined deformation analysis method, the author mache an analysis of tapered bit forced in operating.
本文采用组合变形的分析方法，对锥体连接钎头工作时进行受力分析；
Based on the rigid plastic constitutive equation of lead, the damping force model of lead extrusion damper was deduced from the even plastic deformation energy method.
本文根据铅的刚塑性本构关系，利用均匀塑性变形能法，推导了铅挤压阻尼器的阻尼力滞回模型。
Combining with the relative movement parameters, a deformation analysis method of successive approximations is presented.
结合相对运动参数，提出了一种逐渐趋近的变形分析方法。
Combining with the relative movement parameters, a deformation analysis method of successive approximations is presented.
结合相对运动参数，提出了一种逐渐趋近的变形分析方法。
应用推荐