According to the national standard test methods, the frequency response of winding deformation curve was obtained through testing and analyzing the transformer winding model.
参照国家标准的测试方法，对变压器绕组模型进行了测试、分析，得到了绕组变形的频率响应特性曲线。
Utilizing ANSYS, the static deformation and natural frequency for the spindle of the nc boring-milling machine are analyzed.
利用有限元分析软件ANSYS计算数控镗铣钻床主轴的静态变形与一阶固有频率。
It is very important for deformation analysis in time and frequency domains.
它对变形的时域分析和频域分析有着重要意义。
A new droplet breakage criterion and a modified model of droplet breakage frequency which account for the effect of dispersed phase viscosity on drop deformation and breakage were presented.
在分析研究分散相黏度对液滴变形和破碎影响的基础上，提出了一个改进的液滴破碎频率模型并拓展了液滴破碎判据标准。
As one of the methods of diagnosing the winding deformation, the frequency response analysis method is presently being widely used in many countries besides China.
频响分析法作为变压器绕组变形检测的一种行之有效的方法，已在国内外得到推广使用。
The effect of base structural deformation on inherent frequency of a microbeam resonator is analyzed by using analytical method.
利用解析方法分析了基座变形对微梁共振器固有频率的影响。
The results show that the increase of cyclic frequency would decrease high temperature fatigue lifetime of the alloy and result in different deformation mechanism.
结果表明，循环频率的增加会导致合金高温疲劳寿命的下降及不同的变形机制。
The result also denotes the shearing deformation and rotary inertia of the beam have significant effect on the high frequency.
当考虑梁的剪切变形和转动惯量时，则对梁的高阶频率影响较大。
Well, the deformation patterns at these natural frequencies also take on a variety of different shapes depending on which frequency is used for the excitation force.
对了，在这些固有频率处，变形形式也大为不同，依赖于激振力用哪个频率。
The vibration frequency of box gird is usually calculated by the elementary beam theory, but it will lead to a large error because of the existence of shear lag effect and shear deformation.
由于剪力滞效应及剪切变形的存在，箱梁的弯曲振动频率按照初等梁理论计算往往存在较大的误差。
The application of the artificial neural network technique to the Frequency Response Analysis method (FRA) which is used to detect transformer winding deformation is presented.
探讨了人工神经网络技术在检测变压器绕组变形的频率响应法中的应用。
The distribution stress and deformation, frequency and mode shape is acquired the outline optimization for the circum-shell of Compounding funnel is also studied.
得到了该类双曲型斗壳的应力变形分布、率和振型模态，并对颗粒料仓斗壳的外形曲线进行了优化。
Utilizing variable frequency transducer to get the displacement signal directly, the multimeter can show the tension or compression deformation after the micro-processing of signal.
本仪表采用电感调频式传感器直接输出表征位移的数字信号，经单片机处理后，即可显示拉压变形量。
The study of static deformation, thermally induced distortion, dynamic response of natural frequency and modal pattern has been performed by using frozen fringe, realtime and time-average holography.
介绍了用冻结条纹法、实时全息法和时间平均法对静变形、热变形、固有频率和振型进行研究。
The deformation and fracture of mild steel under high frequency bending fatigue has been studied by optical microscope, scanning electron microscope and microhardness determination.
用光学、扫描电子显微镜及显微硬度计，研究了低碳钢在高频弯曲疲劳过程中的形变及断裂。
In this paper, the effect of shear deformation and rotatory inertia on the free vibration of a beam is studied. Thus a simple and accurate formula for the calculation of frequency is presented.
本文研究剪切变形与转动惯量对梁自由振动的影响，提出了简便、准确的频率计算公式。
After imposed harmonic load, the deformation and stress variation curves with change of frequency can be gained by harmonic analysis in ANSYS.
在模态分析的基本上，对行星齿轮施加简谐载荷，得到行星齿轮的变形和应力在容易产生共振的频率范围内的变化情况；
And the effects of parameters such as joint deformation and incident frequency of wave on the intensity variation of EME were investigated.
同时，研究节理的变形和入射波频率对电磁辐射强度的影响。
Generally, the information about deformation recorded by the fringe is mainly distributed in the low frequency domain, whereas noises are in the high frequency part.
一般来说，散斑图像记录的变形信息主要集中在低频部分，而噪声主要在高频部分。
Vibration frequency of ball end mill by an external force is far from the natural frequency of it, resonance phenomenon does not occur, so vibration and deformation of ball end mill are not abvious.
球头铣刀在外力作用下的振动频率离固有频率较远，不会发生共振现象，由此引起的刀具振动和变形较小。
We automatically optimize the shape of arbitrary 2d and 3d objects through deformation and perforation to produce sounds when struck which match user-supplied frequency and amplitude spectra.
我们可以自动优化任意二维和三维形状，并通过变形，穿孔等方式，使得这些乐器被敲击时能匹配用户提供的频率和幅度谱产生的声音。
The resonant points of frequency response curve at different frequency represent different information of winding deformation.
由于不同频率段反映的变形信息不同，因此将频率段按照谐振点个数平均划分为三个区段。
The superplasticity research was carried out under constant temperature compression deformation for salt-bath cyclic quenched and high frequency hardened T10A steel.
采用盐浴加热循环淬火和高频感应加热淬火对T10A钢进行组织超细化预处理，然后在恒温压缩变形条件下进行超塑性研究。
Based on Tikhonov regularization, a new single epoch algorithm suitable for deformation monitoring using single frequency GPS receivers is proposed.
基于吉洪诺夫正则化理论，研究了一种适合变形监测的单频单历元算法。
0 as the base of pump carries out Finite element analysis, it not only gets its stress and deformation to meet an emergency to but also gives inherent frequency and the form of vibration.
0对水泵底座进行了有限元分析，获得了在载荷作用下结构的应力、应变值和结构的固有频率和振型。
0 as the base of pump carries out Finite element analysis, it not only gets its stress and deformation to meet an emergency to but also gives inherent frequency and the form of vibration.
0对水泵底座进行了有限元分析，获得了在载荷作用下结构的应力、应变值和结构的固有频率和振型。
应用推荐