The deformation characteristics of steel tube being rolled with the said process are analysed.
分析了采用该方法时钢管的变形特征。
The deformation characteristics of Jiangnan fault zone in southern Anhui is discussed in this paper.
主要对发育在皖南段的江南断裂带变形特征进行了讨论。
Disc spring load-deformation characteristics can directly affect pneumatic DTH hammer system vibrations.
碟形弹簧的载荷变形关系直接影响潜孔锤系统振动特征。
Rubber hose is core parts of hose pumps. The deformation characteristics determine the life of hose pumps.
橡胶软管是软管泵的核心部件，其变形特性直接关系到软管泵的性能和使用寿命。
The mechanical properties and the deformation characteristics of the BHA with the eccentric bit are analyzed.
应用数值计算方法，分析了偏心钻头底部钻具组合的受力和变形特性。
Finally, based on the deformation characteristics, the countermeasures of construction technologies are given.
最后，在分析隧道变形特点的基础上，给出了相应的施工对策。
Studied the joint rigidity which affects deformation characteristics of prefabricated arc board of freezing well.
研究了影响冻结井预制弧板井壁变形特性的接头刚度。
The carrying capacity and deformation characteristics of cracked rock mass were investigated by hoop constraint tests.
采用环向约束试验方法研究破裂岩体的承载和变形特性。
The deformation characteristics of concrete under different confining pressures and different strain rates were analyzed.
并对混凝土材料在不同围压下以及不同应变速率下的变形特性进行了深入分析。
The LS-DYNA3D code was used to analyze the influence of guard ring's fillet on deformation characteristics of metal tube.
最后，利用DYNA3D程序就保护环倒角变化对金属圆管对碰区壳体破裂的影响特征进行了初步分析。
Some deformation characteristics of tensile creep revealed by a test of frozen saturated loess are presented in this paper.
本文以试验为依据揭示饱水冻结黄土拉伸蠕变过程的若干特点。
And has the high strength plastic, the middle steel wire support hot forming, arbitrary bending deformation characteristics.
内外有高强度塑料，中间有钢丝支撑热压成形，任意弯曲不变形等特点。
Study of the consolidation and deformation characteristics of saturated clay under self-weight by centrifuge model is described.
本文通过离心试验，研究了饱和粘土在考虑土体自重应力作用下的固结变形特性。
Twins and dislocation movement are two important deformation characteristics of silver nano powder under high pressure shock wave.
孪晶和位错运动是纳米银在超高压冲压波作用下形变的两个重要特征。
Based on the structure and deformation characteristics of the Huoshitan landslide, the causes of landslide formation were analyzed.
根据三峡库区典型滑坡火石滩滑坡的结构及变形特征，分析滑坡形成的原因。
Also analyzed are the deformation characteristics of the metal when conical roll is used and there exist both toe Angle and feed Angle.
分析了采用锥形轧辊，在辗轧角和送进角同时存在时金属的变形特点。
The consolidation deformation characteristics of unsaturated soil and its analysis methods are key issues in the field of soil mechanics.
非饱和土的固结变形特性及其分析理论一直是土力学的研究热点问题。
The study of deformation characteristics for rockfill materials is one of the key tasks in the design of high concrete faced rockfill dam.
筑坝材料变形特性的研究是高面板堆石坝设计工作中的关键工作之一。
This method will be used in the equivalent consolidation deformation characteristics analysis of structural loess further in this article.
本文将这种方法进一步应用于结构性黄土的固结变形特性分析。
In this paper, the rolling technology and deformation characteristics of strip with surface pat-tern of round beans are introduced and discussed.
本文介绍了圆豆形花纹板的轧制工艺，分析了花纹板的变形特点。
The deformation characteristics of Longquanguan DSZ reflect the tectonic evolution of the late Archaean collision orogenic belt in Wutaishan area.
龙泉关韧性剪切带的变形特征反映了五台山晚太古代碰撞造山带的构造演化。
Compared with common concrete, the strength and the deformation characteristics of high-strength concrete vary greatly from that of common concrete.
高强混凝土的强度和变形特性与普通混凝土的相比有较大差别。
In this paper, the strength and deformation characteristics of tailing under high pressure were studied with triaxial tests on three kinds of tailing.
本文通过三种尾矿砂的三轴剪力试验对尾矿砂在高压力下的变形与强度特性进行了研究。
Based on the monitoring data of the Kuyu diversion tunnel, the deformation characteristics and mechanisms of the water-rich soft rock tunnel are analyzed.
基于库尉引水隧洞现场监测资料，对富水软岩隧道的变形特性及变形机制进行分析。
Therefore, it has great significance to study on the load transfer mechanism and deformation characteristics of composite ground under flexible foundation.
因此开展柔性基础下复合地基的荷载传递规律及其变形特性的研究具有重要意义。
The method of fault geometrical parameter that to bring about tectonic deformation through known deformation characteristics is called structure inversion.
构造反演是指利用构造变形形态反推使之变形的断层的几何参数。
Addressing deformation characteristics of the shell during rotary piercing operation, wall thickness unevenness is calculated by means of the FE simulation method.
通过有限元模拟针对斜轧穿孔过程中毛管的变形特点，对其壁厚不均进行了计算。
Addressing deformation characteristics of the shell during rotary piercing operation, wall thickness unevenness is calculated by means of the FE simulation method.
通过有限元模拟针对斜轧穿孔过程中毛管的变形特点，对其壁厚不均进行了计算。
应用推荐