By using of virtual work principle and the unit-load method, the elastic-plastic process of loading and deflection of a beam with one degree of indeterminacy under an even load is analyzed.
通过虚功原理和单位荷载法分析了均布荷载作用下一次超静定梁的弹塑性加载及变形过程。
The Angle of rotation, which provides a measure of the current flowing in the coil, is measured by the movement of the needle or by the deflection of a Beam of light reflected from the mirror.
旋转角度可用来度量线圈内通过的电流，角度用指针的转动或镜面反射光线的偏转来测定。
What is the deflection equation of a cantilever beam fixed at one edge?
悬臂梁安装时的偏差方程序是什么？
A new linear sensing method of deflection and stress, in which the fiber grating bandwidth is stretched by using bilateral cantilever beam, is reported.
报道一种利用双侧悬臂梁展宽光纤光栅带宽实现对挠度和应力线性传感的新方法。
We describe a novel method to enrich isotopes and isomers via magnetic deflection of optically polarized atomic beam.
本文描述一种通过极化原子束的磁偏转实现同位素和同质异能素浓缩的新方法。
Initial deflection of the floor beam of a project by lateral loads and co-axial role occurs because of the construction defects.
某工程受横向荷载和轴压共同作用的楼面梁因施工缺陷发生初始挠曲。
A new concept on the displacement operator for beam unit is established, and a method of calculating the deflection Angle of beam unit is then provided.
本文建立了一个梁单元位移算子的新概念，并提供一种梁平面弯曲变形的梁单元位移算子求变形的计算方法。
A method of calculating elastic curve for semiflexible plate wind tunnel nozzle has been presented, based on the linear theory of small deflection of beam deformation, in this paper.
本文基于梁弯曲变形的小挠度线性理论，提出了半挠性喷管挠性板弹性曲线的计算方法。
In this paper, the deflection curve of a beam of fixed ends is used to represent the speed-time relation of the faster vehicle.
为此，提出用固支梁挠度曲线表示较快车辆的速度-时间关系曲线，由此得到了一种无格子模型。
The approach is based on large deflection characterisation of a curved beam, coupled with fracture mechanics concepts.
该方法是基于曲梁大变形理论及断裂力学而提出来的。
This is the temperature at which a simply supported beam specimen of the material, with a centrally applied load, reaches a predefined deflection.
这是中心承载的该材料简支梁达到预定偏差的温度。
Based on analyzing the relations of degree of pre-stress to stress, deflection and crack of concrete beam, a design method is pro-posed.
在详细分析了预应力度同梁的应力、位移、开裂的关系的基础上提出了部分预应力混凝土梁的设计方法。
This paper provides a simple method for an interrupted polynomial solution for the deflection of a continuous beam.
本文提供一种用截断多项式求解连续梁弯曲变形的简单方法。
The method is based on measuring the deflection of rays from a collimated light beam due to gradients in refractive index.
平行光通过折射率存在梯度的场，光线产生偏转，即产生云纹效应。
Electron beam will deflect in a magnetic field. With the deflection of electron beam in workpiece, tiny curved hole can be machined.
利用电子束在磁场中偏转的原理，使其在工件内部偏转，可加工出微细弯孔。
A model for analyzing the large deflection of an elastic cantilever beam with constraint under uniformly distributed load was established.
建立了分析均布载荷作用下受约束悬臂梁的弹性大变形三阶段模型。
Shows the deflection of a simple beam supported at either end, loaded from 1 or more points.
计算两端各受多点力的简易支撑梁的变形。
Weak absorptions space distribution of materials face are measured by photothermal optical-beam deflection technique. It provided a new method for measurement and research of weak absorptions.
采用光热光偏转技术，实现了材料表面弱光吸收空间分布的测量，为材料表面弱光吸收和热特性的测量与研究提供了一种新手段。
The loading of a tubular busbar is equivalent to that of a large-span beam, and the stress on the cross -section is mainly the tensile stress of the dead weight bending moment with much deflection.
管型母线受力状况相当于大跨度的梁，截面上的应力主要是自重弯矩的拉应力，挠度比较大。
Based on the deflection curve of a built - in beam, the concept of imaginary tails was presented clearly. It supposed that each car had an imaginary tail.
以固支梁挠度曲线方程为基础，明确地提出了假想尾巴的新概念，它假定每一车辆有一假想的尾巴。
Laser-induced plasma shock wave and cavitation bubble by pulsed laser ablation of a metal in water are investigated by a high-sensitive optical beam deflection technique.
采用自行研制的高灵敏度光束偏转测试系统，对脉冲激光烧蚀水下金属产生的等离子体冲击波和空泡效应进行了实验研究。
Laser-induced plasma shock wave and cavitation bubble by pulsed laser ablation of a metal in water are investigated by a high-sensitive optical beam deflection technique.
采用自行研制的高灵敏度光束偏转测试系统，对脉冲激光烧蚀水下金属产生的等离子体冲击波和空泡效应进行了实验研究。
应用推荐