The calculation methods of stiffening bar deflection analysis on utility boiler are presented in detail.
详细介绍了大型电站锅炉刚性梁挠度分析的计算方法。
Authors design the maintenance processes, compile the operation schedule by Gantt chart and network diagram and analyze the schedule by deflection analysis method.
作者对检修过程进行流程设计，提出利用甘特图、网络图编制进度安排，利用偏差分析法对进度进行分析。
The analysis of free vibration of hydropower house by means of two methods are deformation of inclination Angle and slope deflection.
本文首先叙述用两种方法(倾角变位法和角变位移法)分析水电站厂房的自振特性。
In this paper, the method of signal flow graphs is applied to path enumeration and deflection routing performance analysis in multihop networks.
本文将信号流图的方法应用于多级跳跃网中的路径枚举和折射路由性能分析。
Again USES the model, through transformation composite beam highly and various steel plates parameter comparative analysis beam and support capacity, stress, deflection change and so on.
再利用此模型，通过变换组合梁的高度和各钢板的厚度等参数比较分析梁的承载能力，应力，挠度的变化等。
The structural properties of concrete bridge externally prestressed with CFCC, and the analysis methods of deflection, ductility, bending and shear design of the bridge are discussed.
探讨了碳绞线体外预应力混凝土桥梁的结构特点和构造措施，以及该类桥梁中挠度、延性及抗弯、抗剪的计算分析方法。
An theoretical analysis and experimental verifications are made to investigate the folding deflection behavior of inflated tubes.
对充气展开管的弯折挠曲特性进行了理论分析和实验验证。
According to theoretic analysis, computing the bending deflection of every roller is enabled to ignore the effect of the web and only allow to the rectangular section made up of flange plates.
理论分析认为求解各可调辊的压下挠度时，可以不考虑腹板的影响而按翼缘组成的“矩形”断面来进行。
Geometricshape and energetic parameters of H-beam are tested for different bending deflection. Theresults of test show that theoretical and simulation analysis is correct.
测试了不同压下挠度矫直时H型钢的几何形态和主要力能参数，进一步证明了理论分析和仿真结果的正确性。
Analysis of deflection of main girder of crane is made according to the result of residual stress test.
根据残余应力测试的结果，对起重机主梁的下挠变形进行了分析。
The numerical examples in this paper show that the method can be used to analysis large deflection of space trusses.
计算表明本文方法可以有效用于空间桁架结构大位移问题分析。
In this thesis a new numerical method - the finite volume method is developed to achieve the static and dynamic large-deflection response analysis for suspension cables.
本文建立了一种新的数值方法——有限体积法进行悬索的大挠度(几何非线性)静力分析和动力响应分析。
R curve analysis indicates that resisting force of crack growth in polarization direction increases with crack size increasing, owing to ferroelectric domain deflection.
曲线模拟分析表明：极化方向的裂纹扩展阻力随着裂纹深度的增加而增加，体现了畴致偏转对断裂的阻碍作用。
Research results: This paper puts forward the analysis and calculation methods, structural requirements, displacement and deflection value and passenger comfort requirements for elevated station.
研究结果：提出高架车站的分析计算方法、构造要求、位移与挠度限值及旅客舒适度要求等。
In order to study the stress and deflection calculation methods, the stress characteristics of castellated beams were obtained through overall and local stability analysis by ANSYS.
为了研究蜂窝梁应力和挠度的计算方法，应用有限元软件ANSYS对蜂窝梁进行了整体和局部分析，得出蜂窝梁的受力特点。
The paper gives a detailed analysis of the docking mechanism under different conditions and discusses the relationship between the deflection rectifying ability and different materials.
本文对一种对接机构在不同状况下的纠偏能力进行了具体的分析，并讨论了纠偏能力与不同材质之间的关系，为对接机构的设计提供了基础。
The finite element analysis method, the test, the construction, the joint connection and the actual deflection dat.
介绍了双向组合楼盖的有限元分析方法、试验、施工、节点构造以及现场实测挠度结果。
The analysis on short-term stiffness and short-term deflection at inelastic stage with cracks.
带裂缝工作阶段的短期刚度和挠度分析。
In pipe laying and lifting analysis, the contact condition between pipeline and seabed, including deflection, rotation Angle and bending moment, is sometime tricky in a normal mechanical model.
海底管道的铺设分析和提升分析都用到管道和海床之间的接触条件，这个同时含有挠度、转角和弯矩的接触条件，在一般的力学模型中是很难理解的。
Through the load-deflection curves analysis of the reinforcement beams, this article also derived a short-term stiffness formula for calculating.
通过对加固梁荷载—跨中挠度曲线的分析，推导出了加固梁的短期刚度计算公式。
The analysis method can be used to optimize the deflection yoke ring, and to properly select the ferrite materials for energy dissipation reduction.
该方法适用于降低能量损耗的偏转系统磁芯结构的优化和磁性材料的选择等。
This paper carries on the three-dimensional static electromagnetic field analysis on the electron beam scanning deflection coil with multi pole shoe structure.
根据不锈钢毛细管板结构的钎焊特点，建立了扫描电子束钎焊温度场三维有限元分析模型。
The paper gives a detailed analysis of the docking mechanism under different conditions and discusses the relationship between the deflection rectifying ability and different mate...
本文对一种对接机构在不同状况下的纠偏能力进行了具体的分析，并讨论了纠偏能力与不同材质之间的关系，为对接机构的设计提供了基础。
The paper gives a detailed analysis of the docking mechanism under different conditions and discusses the relationship between the deflection rectifying ability and different mate...
本文对一种对接机构在不同状况下的纠偏能力进行了具体的分析，并讨论了纠偏能力与不同材质之间的关系，为对接机构的设计提供了基础。
应用推荐