At last, the debugging result in CCS is given.
最后给出整个系统的CCS验证结果。
At last, the debugging result of the actual circuit was gaven.
最后给出了实际电路的调试结果。
The debugging result initially confirms the practicability and correction of software system and the dependability of hardware system.
初步证实了软件系统的正确性与实用性、硬件系统的可靠性。
Then, the paper briefly describes the system debugging, including hardware debugging, software debugging, and gives the system debugging result.
然后，简要地叙述了系统的调试，包括硬件调试、软件调试，并给出了系统的调试结果。
After the measuring machine been manufactured and assembled completely, the main factors that affect the measure accuracy have been studied by analyzing debugging result.
测量设备在制造装配完成后，通过对调试结果的分析，找出影响测量精度的关键因素。
The communicate stipulations of an agreement is constituted according as the characteristic of S7-200 PLC. The main procedure flow chat is drawn. The part of debugging result is shown.
结合S7—200系列plc的特点，制定了通信规约，画出了PLC的主程序流程图，并给出了部分调试结果。
This could result in a higher learning curve for new developers and additional testing or debugging time.
这会给新入门的开发人员带来更高的学习曲线，并且会增加测试与调试时间。
Confusions like that result in an unpredictable system and adds unnecessary complexity to debugging.
这样的困惑便导致不可预测的系统并增加不必要的调试复杂性。
The design of biochemical analyzer has been adopted online system debugging, it can run stably, and the result is correct, so the system design is reasonable and reliable.
本文设计的生化分析仪已经过系统的联机调试，运行稳定、结果正确，表明系统的设计是合理的、可靠的。
Chapter six analyses the whole system debugging and test result so as to finish product at last.
第六章分析了整个系统调试和测试结果，完成最终的产品交验。
The simulation result proves that this method is reasonable and deficient and offers a new thought way for designing and debugging actual control system of motor.
并且进行了仿真，结果表明该方法的合理性、有效性，为实际电机控制系统的设计和调试提供了新的思路。
In addition, system debugging process and result of electric meter data collector software were briefly introduced, and some Suggestions on further improvement on this system software were proposed.
此外，本文还对电表数据集中器的系统调试过程及调试结果给予了简要介绍，并对系统的进一步改进提出了自己的设想。
From the result of debugging we can see that the whole system has realized the basic functional requirements and runs stably and reliably.
通过实验室实际调试，运行结果表明：系统整体设计合理、运行稳定，基本上实现了预期的目标。
At last, the difficulties occurred in the system debugging and the simulation result of current testing channel are analysed.
文章最后对系统调试过程中出现的问题及电流检测通道的模拟检测结果进行了分析。
The debugging and perfection process of the rubber ball cleaning system was introduced and the result is satisfactory, using the method of combining theoretical analysis and actual testing.
介绍了胶球清洗系统调试和完善的过程，通过理论分析和实际试验相结合的方法，取得了令人满意的效果。
And the last part is about the hardware and software requirements of the wireless acceleration measurement system, and the method and result of the system debugging.
最后给出了无线加速度测量系统的硬件、软件和系统调试的方法和结果。
Gathered the card and debugged and received the result of debugging to the temperature of many ways finally.
最后对多路温度采集卡进行了调试并得到了结果。
The process of control under software and the result of debugging are also presented.
给出了软件控制过程和调试结果。
With successful joint debugging on the ground, result shows that the system can satisfy the operational requirements for further aviation.
地面联合调试结果表明该系统能够满足即将开展的航空遥感作业的要求。
This dissertation briefly introduces the test platform for the hardware and software, the method of debugging the driver, as well as test course, and gives the result of the test.
论文介绍了整个硬件和软件的测试平台、驱动程序的调试方法、驱动程序的测试流程，并给出了测试结果及测试结论。
Finally, FEM simulation technology is introduced into CWR process debugging and its simulation result is analyzed. The fault diagnose for CWR pieces is also summarized and can be used as reference.
最后，将有限元数值模拟技术引入到楔横轧模具与工艺调试中，阐述了虚拟调试的过程和分析了有限元模拟结果，概括了轧件缺陷诊断分析模块可作为技术人员提供参考。
Through debugging and running, the result is good.
通过调试、运行及统计观察了整个运行效果。
The selection of each apparatus of control system, the design of software and hardware of MCS control systems, and last debugging and result …
论述了控制系统各器件的选择和单片机控制系统的软硬件设计，以及最后的调试和结果。
After the debugging, the systemic running result is satisfied the expect requirement basically, validate the rationality of the design.
通过现场对集成系统进行调试，系统的运行结果基本满足预期要求，验证了设计的合理性。
The result is verified to attain the index requirements by debugging and practical operating, after system design has finished.
系统完成后，经联机仿真调试和实际通信结果表明：性能良好，达到了预定的设计指标要求。
In the chapter of debugging, first introduced the debugging tools generally, and then analyzed the theory and process of the hardware driver. At last, the test standard and result is presented.
在硬件调试部分，先简要介绍了调试工具，之后详细分析了底层硬件驱动的调试原理和流程，最后，给出了该机顶盒的测试指标和测试结果。
In phase of the system implement, we coding and debugging for each function according to the results of analysis and design. As a result, we developed the Bus Information Query Service system.
在系统程序设计阶段依据系统分析和设计阶段取得的成果，对系统的各项功能进行编码、调试运行，开发了面向社会公众的公交信息服务系统。
The dynamic simulation result also indicates that the trial-run scheme of helium refrigerator can be optimized and the debugging cost and time can be saved though dynamic simulation.
仿真结果还表明，氦制冷系统的动态仿真结果可以对优化氦制冷机试车方案、节省调试费用、节约调试时间、进一步提高氦制冷机制冷效率提供可靠的理论基础。
The dynamic simulation result also indicates that the trial-run scheme of helium refrigerator can be optimized and the debugging cost and time can be saved though dynamic simulation.
仿真结果还表明，氦制冷系统的动态仿真结果可以对优化氦制冷机试车方案、节省调试费用、节约调试时间、进一步提高氦制冷机制冷效率提供可靠的理论基础。
应用推荐