The driving system use DC servo system of modulating pulse width.
驱动系统采用脉宽调制直流伺服系统。
The DC servo motors are controlled with motion controller LM629 and motor drive chip LMD18200 based on PC104 bus.
在PC 104总线控制下，应用运动控制芯片LM 629和电动机驱动芯片LMD18200实现了直流伺服电动机的控制。
The system mainly consists of 21bit all quantity encoder feedback, digital PID computation and DC servo mechanism.
该系统主要由21位全量编码反馈、数字PID运算和直流伺服机构组成。
This paper designs a DC servo control system based on DSP, it is a part of industry scene level motion control system.
本文设计开发了一套基于DSP的直流伺服控制系统，它是工业现场级运动控制系统的一部分。
The magnetic field of a low-inertia REPM DC servo motor with ferrite shielding case was calculated by the finite element method.
本文采用有限元法对带铁氧体屏蔽罩的稀土永磁低惯量直流伺服电动机的磁场进行了计算。
The packet loss of networked DC servo motor control system is studied by the sliding-mode control method to improve its robustness.
利用滑模变结构控制方法对存在丢包情况下的网络直流伺服电机控制系统的鲁棒性问题进行了研究。
It proves that the controlling system designed by this paper is a more perfect system using in the DC servo motor controlling field.
本文设计的控制系统是一套较为理想的直流伺服电动机控制系统。
This paper introduces the application of IGBT, EXB841 and LEM models in high power PWM DC servo driving system, and the EMCD of driving system.
本文介绍IGBT、EXB841和LEM模块在大功率PW M直流伺服驱动系统中的应用和系统抗干扰设计。
Double motors DC servo system is the drive unit of flutter exciter system. As the core of servo system, controller plays an important role to the whole system performance.
双电机直流同步伺服系统是颤振激励系统的驱动单元，控制器作为伺服系统的核心，对整个系统性能的优劣起着非常重要的作用。
The proposed algorithm is applied to the control of a DC servo system. Simulation results show that the proposed controller can track the desired position signal well whe…
将所提方法用于直流伺服系统的控制，仿真研究结果表明，所设计的控制器可以有效减弱抖振，并使伺服系统具有良好的跟踪能力和很强的鲁棒性。
DC servo system is the drive unit of vibration stimulation system. As the core of servo system, undoubtedly controller plays an important role to the whole system performance.
双电机同步直流伺服系统是颤振激励系统的驱动单元，控制器作为伺服系统的核心，对整个系统性能的优劣起着非常重要的作用。
Mathematical model of adaptive variable structure of control system for DC servo robot was established with nonlinear sliding mode formed with saturation type scalar functions.
采用饱和型标量函数构成非线性滑模建立直流伺服机器人控制系统的自适应变结构数学模型。
The mechanical design, sensors system design, DC Servo control system design and data acquisition system design of the man-computer stiffness display interface device are introduced.
介绍了该人机触觉再现接口装置的机械设计、传感器系统、直流伺服控制系统以及数据采集系统的设计。
For PWM DC servo object, this paper combined the sliding mode control method with the integral control method effectively to form a kind of DC servo controller with high performances.
针对PWM直流伺服被控对象，将滑模变结构控制与积分控制有效地结合在一起，综合出一种高性能直流伺服控制器。
Simulation results indicate that the clutch engaging speed can be accurately controlled by using DC servo motor dual closed loop control system. The start quality of Vehicle was improved.
结果表明：直流伺服电机驱动离合器，能很好地控制离合器的结合速度，提高车辆起步品质。
The system consists of 80C196KB/KC single chip microcomputer, 27C64 memory, optical coder and its external decode circuit, motor drive circuit, current - limiting circuit, DC servo motor etc.
本系统由80C196KB／KC单片机、27C64存贮器、光学编码器及外部译码电路、电机驱动电路、限流电路、直流伺服电机等组成。
This paper analyzes the armature reaction of the brushless DC servo motor by means of finite element method (FEM), and points out that the armature reaction has great influence on torque ripple.
采用数值计算方法对无刷直流电机的电枢反应作了分析，指出了电枢反应对力矩波动的影响。
Kits include mounting plate and hardware for mounting to flange or servo mount encoders, making them interchangeable with 5PY DC tach generators.
套件包括安装板安装到安装法兰或伺服编码器和硬件，使之与5PY区盛德发电机互换。
For Brushless DC (BLDC) servo control, optional 3 phase commutation tracks replace the traditional Hall Effect sensors.
无刷直流(BLDC)伺服控制，可选的3相换轨取代传统的霍尔效应传感器。
A new equipment for simulated the performance of propeller load is introduced in this paper, it's an all digital DC torque servo system using torque closed loop and current closed loop control.
介绍一种新型的螺旋桨特性负载模拟装置，它是全数字控制的直流转矩伺服系统，采用转矩电流双闭环控制方式。
DC PWM servo system is controlled by this kind of discrete sliding mode control strategy.
针对一个具体的直流pwm伺服系统，采用这种离散滑模控制策略进行控制。
This paper presents a digitized DC motor position servo control system based on DSP.
提出一种基于数字信号处理器（DSP）的全数字直流位置伺服控制系统。
In order to control the single joint's motion of the robot, a joint servo controller which integrates motion control and driving of the DC motor is designed.
针对机器人单关节的运动控制，设计了集直流电机运动控制和驱动于一体的关节伺服控制器。
In this paper the design of a discrete time variable structure controller (VSC) for a brushless DC motor drive (BLDCM) position servo system is introduced.
介绍了无刷直流电动机(BLDCM)位置伺服系统离散时间变结构控制器的设计方法。
The position tracking controller with good performance is the guarantee of high precision brushless DC motor servo system.
为了设计高精度的直流无刷电机伺服控制系统，性能优良的位置跟踪控制器是其重要保障。
Intelligent Power IC (IPM) is applied to a radar servo system, which is drived by brushless DC motor. The system can be used in harsh circumstances and get some satisfactory performance.
在无刷直流电动机驱动的雷达伺服系统中，采用了智能功率驱动模块(IPM)来实现功率驱动，它能够满足苛刻的环境要求，并能获得比较满意的系统性能。
Slotted on shaft end, suitable for DC motor and servo motor.
轴头开槽，适用于直流电机，伺服电机。
A servo card in PLC for printed DC motor used in TF3 equipment has been developed.
介绍了TF 3装盘机电气控制系统所需的印刷直流电动机伺服控制板的研制。
A servo card in PLC for printed DC motor used in TF3 equipment has been developed.
介绍了TF 3装盘机电气控制系统所需的印刷直流电动机伺服控制板的研制。
应用推荐