Adopting ac servo motor as the driving device, can the dc servo motor and a high precision, high performance as the half closed loop or closed loop control system.
采用交流伺服电机作为驱动器件，可以和直流伺服电机一样构成高精度，高性能的半闭环或闭环控制系统。
The system mainly consists of 21bit all quantity encoder feedback, digital PID computation and DC servo mechanism.
该系统主要由21位全量编码反馈、数字PID运算和直流伺服机构组成。
Mathematical model of adaptive variable structure of control system for DC servo robot was established with nonlinear sliding mode formed with saturation type scalar functions.
采用饱和型标量函数构成非线性滑模建立直流伺服机器人控制系统的自适应变结构数学模型。
A new equipment for simulated the performance of propeller load is introduced in this paper, it's an all digital DC torque servo system using torque closed loop and current closed loop control.
介绍一种新型的螺旋桨特性负载模拟装置，它是全数字控制的直流转矩伺服系统，采用转矩电流双闭环控制方式。
Adopting ac servo motor as a drive device, can and dc servo motor as a high precision, high performance and a half closed loop or closed loop control system.
采用交流伺服电机作为驱动器件，可以和直流伺服电机一样构成高精度，高性能的半闭环或闭环控制系统。
DC PWM servo system is controlled by this kind of discrete sliding mode control strategy.
针对一个具体的直流pwm伺服系统，采用这种离散滑模控制策略进行控制。
This paper presents a digitized DC motor position servo control system based on DSP.
提出一种基于数字信号处理器（DSP）的全数字直流位置伺服控制系统。
To make the servo system have the expected its, it s especially important for selection of DC bus voltage in servo driver.
在伺服系统中要使系统能够满足所期望的性能，伺服系统驱动器直流母线电压的选择尤为重要。
In this paper the design of a discrete time variable structure controller (VSC) for a brushless DC motor drive (BLDCM) position servo system is introduced.
介绍了无刷直流电动机(BLDCM)位置伺服系统离散时间变结构控制器的设计方法。
The position tracking controller with good performance is the guarantee of high precision brushless DC motor servo system.
为了设计高精度的直流无刷电机伺服控制系统，性能优良的位置跟踪控制器是其重要保障。
DC servo system is the drive unit of vibration stimulation system. As the core of servo system, undoubtedly controller plays an important role to the whole system performance.
双电机同步直流伺服系统是颤振激励系统的驱动单元，控制器作为伺服系统的核心，对整个系统性能的优劣起着非常重要的作用。
This paper introduces the application of IGBT, EXB841 and LEM models in high power PWM DC servo driving system, and the EMCD of driving system.
本文介绍IGBT、EXB841和LEM模块在大功率PW M直流伺服驱动系统中的应用和系统抗干扰设计。
This paper designs a DC servo control system based on DSP, it is a part of industry scene level motion control system.
本文设计开发了一套基于DSP的直流伺服控制系统，它是工业现场级运动控制系统的一部分。
Intelligent Power IC (IPM) is applied to a radar servo system, which is drived by brushless DC motor. The system can be used in harsh circumstances and get some satisfactory performance.
在无刷直流电动机驱动的雷达伺服系统中，采用了智能功率驱动模块(IPM)来实现功率驱动，它能够满足苛刻的环境要求，并能获得比较满意的系统性能。
It proves that the controlling system designed by this paper is a more perfect system using in the DC servo motor controlling field.
本文设计的控制系统是一套较为理想的直流伺服电动机控制系统。
The mechanical design, sensors system design, DC Servo control system design and data acquisition system design of the man-computer stiffness display interface device are introduced.
介绍了该人机触觉再现接口装置的机械设计、传感器系统、直流伺服控制系统以及数据采集系统的设计。
In this paper, a DC brushless motor servo-control system based on DSP is designed.
本文设计了一种基于DSP的直流无刷电动机伺服控制系统。
Double motors DC servo system is the drive unit of flutter exciter system. As the core of servo system, controller plays an important role to the whole system performance.
双电机直流同步伺服系统是颤振激励系统的驱动单元，控制器作为伺服系统的核心，对整个系统性能的优劣起着非常重要的作用。
The driving system use DC servo system of modulating pulse width.
驱动系统采用脉宽调制直流伺服系统。
The system consists of 80C196KB/KC single chip microcomputer, 27C64 memory, optical coder and its external decode circuit, motor drive circuit, current - limiting circuit, DC servo motor etc.
本系统由80C196KB／KC单片机、27C64存贮器、光学编码器及外部译码电路、电机驱动电路、限流电路、直流伺服电机等组成。
Simulation results indicate that the clutch engaging speed can be accurately controlled by using DC servo motor dual closed loop control system. The start quality of Vehicle was improved.
结果表明：直流伺服电机驱动离合器，能很好地控制离合器的结合速度，提高车辆起步品质。
The AC servo system of FANUC 11 series is a AC-DC-AC conversion frequency speed adjusting system, which use PWM as the speed-adjusting control method.
FANUC一11型交一直一交频调速系统，调速的控制方法为脉冲宽度调制(pwm)法。
The packet loss of networked DC servo motor control system is studied by the sliding-mode control method to improve its robustness.
利用滑模变结构控制方法对存在丢包情况下的网络直流伺服电机控制系统的鲁棒性问题进行了研究。
The system takes photo-electricity coder as Angle position sensor, using brush DC motor as servo motor. The full-digital servo system is based on controller MCL2805.
采用光电编码器作为角位置传感器，以有刷直流电机作为伺服系统的伺服电机，使用控制器MCL2805实现全数字伺服控制系统。
The proposed algorithm is applied to the control of a DC servo system. Simulation results show that the proposed controller can track the desired position signal well whe…
将所提方法用于直流伺服系统的控制，仿真研究结果表明，所设计的控制器可以有效减弱抖振，并使伺服系统具有良好的跟踪能力和很强的鲁棒性。
The proposed algorithm is applied to the control of a DC servo system. Simulation results show that the proposed controller can track the desired position signal well whe…
将所提方法用于直流伺服系统的控制，仿真研究结果表明，所设计的控制器可以有效减弱抖振，并使伺服系统具有良好的跟踪能力和很强的鲁棒性。
应用推荐