This paper introduced brushless DC motor controller MC33033's performances, working principles and application circuit.
介绍无刷直流电机控制器MC33033的特性，工作原理和应用电路。
This paper introduces the suppression methods of spike current in the high voltage brushless DC motor controller based on MC33035.
介绍基于MC33035高压无刷直流电动机控制器尖峰电流的几种抑制方法。
A design of hybrid electric vehicle (HEV) brushless DC motor controller based on TMS320LF2407 with energy regeneration, which is used in the drive system of the HEV.
设计了以TMS320 LF 2407作为中央处理器的无刷直流电动机控制器，并将该控制器应用于混合动力汽车的驱动系统中。
In the paper, the hardware circuit design of a DSP-based Brushless DC Motor Controller is given, which includes a current loop, a speed position loop, and IPM (Intelligent Power model) driver.
本文提出了一种基于DSP的直流无刷电机控制器的硬件电路，包括电流环、速度位置环和IPM(智能功率模块)驱动的硬件电路设计。
The operation principle and designing method of PWM controller of brushless DC square wave motor is introduced.
本文介绍了无刷直流方波电机的工作原理和其PWM控制器的设计。
The position tracking controller with good performance is the guarantee of high precision brushless DC motor servo system.
为了设计高精度的直流无刷电机伺服控制系统，性能优良的位置跟踪控制器是其重要保障。
The controller of the DC motor speed adjusting system is developed, which is based on ITAE optimum control theory combined with PI control.
提出了一种用于直流电机调速系统的控制器设计方法，该方法主要基于ITAE最优控制理论，并结合PI控制。
In order to control the single joint's motion of the robot, a joint servo controller which integrates motion control and driving of the DC motor is designed.
针对机器人单关节的运动控制，设计了集直流电机运动控制和驱动于一体的关节伺服控制器。
In the process of writing this thesis, first, based on the theory of the DC motor, controller and sensors, the control circuit has been designed.
在论文的写作过程中，首先对直流电机、微控制器和传感器等进行了深入的研究，在理论基础上，设计了系统的控制电路。
This paper introduces an electric bicycle controller combined with DC brushless motor, specially describes the system and control technology of the new mode and applied electric bicycle's controller.
本文介绍了一种与直流无刷电动机配合使用的电动自行车控制器，着重论述了此种新型、实用的电动自行车控制器的系统构成和设计技术。
The digital PWM speed controller based on the DC motor PWM speed regulating theory and using a 16 bit microcomputer 80C196KB/KC as the central control chip, was presented.
介绍了以十六位单片机80C196KB/KC作为中心控制芯片，结合直流电机PWM调速原理制成的数字直流PWM调速控制器。
A good controller is crucial to speed control of brushless DC motor, so it is important for brushless DC motor to find out a good control method.
控制器对无刷直流电动机的转速控制至关重要，因此研究无刷直流电机的控制策略十分重要。
This thesis is part of the project named "the controller of the Brushless DC Motor for electric-bike", which comes from the IT Special Fund of Dalian.
本课题源自大连集成电路设计产业化专项基金项目“电动自行车无刷直流电机控制器开发”。
Constructed here is a dynamic mathematic model of fuel cell vehicle powertrain which is composed of fuel cell engine, DC motor and its controller and power battery.
建立了包括燃料电池发动机、电机及其控制器、动力蓄电池组在内的燃料电池轿车动力系统的动态数学模型。
Absrtact: DC motor control generally USES the microcontroller or DSP as the core controller, which is less integrated and less stable.
摘要：直流电机的控制一般采用单片机或DSP作为核心控制器，集成度较低并且稳定性较差。
In this paper, a DC motor speed control system based on fuzzy controller theory is introduced.
本文主要介绍了以模糊控制理论为基础的直流电机调速模糊控制系统。
The system takes photo-electricity coder as Angle position sensor, using brush DC motor as servo motor. The full-digital servo system is based on controller MCL2805.
采用光电编码器作为角位置传感器，以有刷直流电机作为伺服系统的伺服电机，使用控制器MCL2805实现全数字伺服控制系统。
The fuzzy logic controller designed in this study determines the required angular used in the DC chopper control based on motor speed error and its change.
设计的模糊控制器以电机的转速偏差及转速偏差率为输入，输出量用于控制斩波调速时的导通角。
This article introduced the research and the development of high power DC-MOTOR controller based on PWM with chip TL494.
本文介绍了基于PWM芯片TL 494的大功率直流电机控制器的研究和开发。
In this paper the design of a discrete time variable structure controller (VSC) for a brushless DC motor drive (BLDCM) position servo system is introduced.
介绍了无刷直流电动机(BLDCM)位置伺服系统离散时间变结构控制器的设计方法。
A new type of controller of PM brushless DC motor based on IntelligentPower Module (IPM) is developed.
研究基于智能功率模块IPM构成的永磁无刷直流电动机新型控制器。
The DC servo motors are controlled with motion controller LM629 and motor drive chip LMD18200 based on PC104 bus.
在PC 104总线控制下，应用运动控制芯片LM 629和电动机驱动芯片LMD18200实现了直流伺服电动机的控制。
A kind of PID controller with fuzzy algorithm setting on-line PID parameters automatically was designed and applied in brushless DC motor speed control system.
通过设计一种模糊pid控制器，应用模糊算法在线自动整定PID参数的方法，将其应用于无刷直流电动机调速控制系统。
The properties of dc motor drive system using I-P controller are analysed briefly.
本文简要分析了采用I—P控制器的直流拖动系统的特点。
The traditional PID/PI controller is replaced by the combination of CMAC and PD controller, and it is applied on the DC motor based on DSP.
采用小脑模型神经网络（CMAC）控制器与常规PD控制器相结合的自适应控制器，取代常规的PID或PI控制器，实现对直流电机的控制，并基于DSP来实现。
Construct dynamic mathematic model of the fuel cell vehicle powertrain which is composed of fuel cell engine, DC motor and its controller, as well as the power battery.
建立了包括燃料电池发动机、电机及其控制器、动力蓄电池组在内的燃料电池汽车动力系统的动态数学模型。
The experience of designing the serial communication program between PC and 89c51 micro-controller for the speed control of large DC motor is introduced by some examples.
通过实例，介绍为大型直流电机调速系统开发PC机与89c51芯片之间串行数据通信的经验。
The paper presents two kinds of algorithms for two kinds of controller structure and the paper gives the result of experiment on DC motor speed control system.
文中分两种情况给出了两种控制器结构及相应的算法，最后示出了在调速系统上的实验结果。
Achieving the control of brushless DC motor by using fuzzy controller is one of effective means to improve system performance.
利用模糊控制实现无刷直流电动机的控制是提高系统性能的有效手段之一。
Achieving the control of brushless DC motor by using fuzzy controller is one of effective means to improve system performance.
利用模糊控制实现无刷直流电动机的控制是提高系统性能的有效手段之一。
应用推荐