A design of hybrid electric vehicle (HEV) brushless DC motor controller based on TMS320LF2407 with energy regeneration, which is used in the drive system of the HEV.
设计了以TMS320 LF 2407作为中央处理器的无刷直流电动机控制器，并将该控制器应用于混合动力汽车的驱动系统中。
The position tracking controller with good performance is the guarantee of high precision brushless DC motor servo system.
为了设计高精度的直流无刷电机伺服控制系统，性能优良的位置跟踪控制器是其重要保障。
This paper covers an analog compound orthogonal neural network controller and its application to two closed-loop DC speed governing system.
在数字复合正交神经网络的基础上提出一种模拟复合正交神经网络，并用于直流双闭环调速系统中。
The robust adaptive control law is proposed for a HVDC power modulation controller of the interconnected AC/DC power system.
设计了应用于交直流互联电力系统的直流功率调制的非线性鲁棒自适应控制器。
The analog neutral controller can be applied to DC and AC speed governing system.
该模拟神经控制器能用于直流与交流调速系统中。
Hardware and software configuration of drive system with position controller, DC drive unit and PLC for a retainer of semi-floating mandrel mill are analysed.
分析了由位置控制器、直流传动装置和PLC组成的半浮芯棒连轧机组限动链控制系统的硬件配置及软件组成。
Apply fuzzy self-adaptive PID controller to control the DC timing system and design three self-adaptive PID controllers which adjust the PID parameters respectively in real-time way.
利用模糊自适应PID控制器对直流调速系统进行控制，设计了三个自适应模糊控制器分别实时调整PID参数。
The controller of the DC motor speed adjusting system is developed, which is based on ITAE optimum control theory combined with PI control.
提出了一种用于直流电机调速系统的控制器设计方法，该方法主要基于ITAE最优控制理论，并结合PI控制。
DC servo system is the drive unit of vibration stimulation system. As the core of servo system, undoubtedly controller plays an important role to the whole system performance.
双电机同步直流伺服系统是颤振激励系统的驱动单元，控制器作为伺服系统的核心，对整个系统性能的优劣起着非常重要的作用。
In this paper the design of a discrete time variable structure controller (VSC) for a brushless DC motor drive (BLDCM) position servo system is introduced.
介绍了无刷直流电动机(BLDCM)位置伺服系统离散时间变结构控制器的设计方法。
This paper introduces an electric bicycle controller combined with DC brushless motor, specially describes the system and control technology of the new mode and applied electric bicycle's controller.
本文介绍了一种与直流无刷电动机配合使用的电动自行车控制器，着重论述了此种新型、实用的电动自行车控制器的系统构成和设计技术。
The results show that the signal-modulating type synthetical nonlinear SVC controller can provide higher damping to the system, so as to enhance the transient stability of the AC and DC hybrid system.
研究表明，信号调制型SVC综合非线性控制器，能够给系统提供较强的阻尼，从而提高了整个交直流混合系统的暂态稳定性。
A kind of PID controller with fuzzy algorithm setting on-line PID parameters automatically was designed and applied in brushless DC motor speed control system.
通过设计一种模糊pid控制器，应用模糊算法在线自动整定PID参数的方法，将其应用于无刷直流电动机调速控制系统。
The paper introduces the control method of Brushless DC Moter. FeasiBle scheme of position sensorless is discussed. Control strategy of the BLDCM system which is based on DSP controller is introduced.
本文介绍了元刷直流电动机的控制方法，探讨了无位置传感器的可行性方案，介绍了以DSP为控制器的BLDCM系统的控制策略。
The paper presents two kinds of algorithms for two kinds of controller structure and the paper gives the result of experiment on DC motor speed control system.
文中分两种情况给出了两种控制器结构及相应的算法，最后示出了在调速系统上的实验结果。
This article is based on fuzzy control theory and design of fuzzy controller, and PID control and fuzzy control, for DC double loop system.
本文根据模糊控制理论设计了模糊控制器，并将PID控制和模糊控制相结合，用于直流双闭环调速系统。
An adaptive speed control scheme for DC drive system, which combines an adaptive PID controller based on single neuron with a load observer, is presented.
针对直流调速系统，将单神经元自适应PID控制器与负载观测器有机结合，提出了一种基于单神经元的自适应速度控制方法。
The properties of dc motor drive system using I-P controller are analysed briefly.
本文简要分析了采用I—P控制器的直流拖动系统的特点。
In this paper, a DC motor speed control system based on fuzzy controller theory is introduced.
本文主要介绍了以模糊控制理论为基础的直流电机调速模糊控制系统。
This paper brings forward a nonlinear variable structure controller for the system of AC paralleled with DC.
提出了一种针对交直流并联输电系统的非线性变结构控制方法。
The system takes photo-electricity coder as Angle position sensor, using brush DC motor as servo motor. The full-digital servo system is based on controller MCL2805.
采用光电编码器作为角位置传感器，以有刷直流电机作为伺服系统的伺服电机，使用控制器MCL2805实现全数字伺服控制系统。
Double motors DC servo system is the drive unit of flutter exciter system. As the core of servo system, controller plays an important role to the whole system performance.
双电机直流同步伺服系统是颤振激励系统的驱动单元，控制器作为伺服系统的核心，对整个系统性能的优劣起着非常重要的作用。
This paper introduced the design and realization of DC speed regulation system controlled by fuzzy controller based on TMS320LF2407.
本文介绍基于TMS320 LF 2407的模糊控制直流调速系统设计及实现。
This paper introduced the design and realization of DC speed regulation system controlled by neuron controller based on TMS320LF2407.
本文介绍基于TMS320LF2407的神经网络控制直流调速系统设计及实现。
This paper introduces rebuilding electric control system of portal crane drived by DC and the application of digital DC speed controller, PLC and touchable industrial graphic monitoring system.
简要介绍直流驱动的门机电控系统改造，包括数字式直流调速器、PLC和触摸式工业图形监控系统的应用。
Achieving the control of brushless DC motor by using fuzzy controller is one of effective means to improve system performance.
利用模糊控制实现无刷直流电动机的控制是提高系统性能的有效手段之一。
A DMC controller was designed based on DMC algorithm to improve the dynamic performances of DC motor's speed adjusting system.
根据DMC算法设计DMC控制器，以提高直流调速系统的动态性能。
The influence of the DC capacitor value. transformer reactance and controller parameters on power system stability is analyzed.
系统地分析了ASVG直流侧电容量、变压器电抗值以及控制参数对电力系统稳定性的影响；
The proposed algorithm is applied to the control of a DC servo system. Simulation results show that the proposed controller can track the desired position signal well whe…
将所提方法用于直流伺服系统的控制，仿真研究结果表明，所设计的控制器可以有效减弱抖振，并使伺服系统具有良好的跟踪能力和很强的鲁棒性。
The proposed algorithm is applied to the control of a DC servo system. Simulation results show that the proposed controller can track the desired position signal well whe…
将所提方法用于直流伺服系统的控制，仿真研究结果表明，所设计的控制器可以有效减弱抖振，并使伺服系统具有良好的跟踪能力和很强的鲁棒性。
应用推荐