The paper researches buildings of dynamic damage process analysis.
本文就着眼于建筑物的动态损害过程分析。
The nonlinear damage process is achieved by means of piecewise linearity.
通过分段线性的方法实现了混凝土构件的非线性损伤过程分析。
So, it is the new method of researching welded structure fatigue damage process.
因此，它是一种研究焊接结构疲劳损伤过程的新途径。
In subsidence, damage process of surface buildings is a complex dynamic process.
在沉陷区内，地表建筑物的损害过程是一个复杂的动态过程。
Finite element method is applied to simulate the whole damage process and obtain the curves in theory.
运用有限元方法，模拟整个破坏过程，通过计算得出理论上的载荷-位移曲线和侵彻功-位移曲线。
The damage process of paddy stem borer to rice plant can be regarded as a single input-single output system.
三化螟为害水稻的过程可以看作一个单输入——单输出系统。
The results show that the layup sequence has a considerable effect on the damage process and failure mode of the material.
结果表明，铺层次序的不同使得两组材料的损伤进程和破坏模式具有很大差异。
Concrete damage process may be divided into several stages, and the method of extracting the damage variable was proposed.
将混凝土材料的损伤过程进行了分段，提出了损伤变量的提取方法。
The concrete damage process is divided into several sections, and the method of extracting the damage variable is proposed.
将混凝土材料的损伤过程进行了分段，提出了损伤变量的提取方法。
It is difficult to detect the absolute density of rock by ct image in quantitative analysis of rock damage process in compression.
用CT图像定量分析岩石受力损伤破坏过程的难点，是难以知道岩石内部的绝对密度变化量。
The supersonic detection of concrete dynamic damage process is difficult due to the variety of testing foundation when there is load.
但混凝土在荷载作用下的动态破坏过程，由于超声波测试面发生变形，使常规超声波测试无法完成。
The supersonic detection of concrete dynamic damage process can be tested effectively by auxiliary testing equipment and supersonic apparatus.
同时通过辅助装置还可消除试件在破坏过程中由于变形带来的测试误差。
The damage process of the doors is obtained from the numerical results and the week points of the door in different time points are shown clearly.
分析结果再现了抗爆门在爆炸荷载作用下变形和破坏的过程，并清晰显示出不同时刻抗爆门的薄弱环节。
In this paper, the damage process of composite laminated plate subjected to low velocity impact is analyzed by using a high-order displacement mode.
运用一种精度较高的高阶位移模型进行复合材料层合板的应力分析，在分层损伤处采用沿厚度分段抛物线插值的方法拟合横向剪应力。
The results show that the damage process of specimens can be divided into three stages:undamaged, damage developed stably and damage developed rapidly.
研究结果表明，试件的损伤过程可以分为无损、损伤稳定增长、损伤急剧增长三个阶段；
The results showed that it is feasible and effective. Especially, it made possible the study of the same damage process from different angles by contrast.
结果表明该方法是可行的，且具有实用性，和便于同一损伤过程的多角度对比研究的优点。
An approach for simulating damage process of prestressed reinforced concrete structures under impact load by applying the discrete element method is presented.
采用离散单元法模拟了预应力钢筋混凝土梁在冲击荷载下的破坏过程。
Results show that some different stages happen in the damage process and the interface roughness has an obvious effect on the mechanical behaviors of the model.
结果表明，两体力学模型破坏过程具有几个明显的不同阶段，节理面粗糙度对其力学性能具有明显的影响。
As a special tort conduct, environmental damage has its own features, such as unequal subjects, valuable causal action, complex damage process and serious consequences etc.
作为一种特殊的侵权行为，环境损害具有法律关系主体不对等性、原因行为的价值性、损害过程的复杂性、损害结果的严重性等特征。
The computation and simulation of the damage process are meaningful in furnishing guidance toward the removal of trouble spots and toward a refined design of machine elements.
这一失效过程的计算机模拟，对机器零件的排故和改进设计具有一定的指导意义。
The impact damage process and residual tensile strength after impact of laminated composites are analyzed by the whole-process analysis method and 3D progressive damage theory.
应用提出的全程分析方法和三维逐渐累积损伤理论，对层合板的冲击过程以及冲击后含损伤层合板在拉伸载荷下的破坏过程进行详细分析。
Rocks were typical inhomogeneous brittle materials with abundant various deficiencies inside and will generate plenty of acoustic emission signals during damage process under loading.
岩石是典型的非均匀脆性材料，其内部富含各种缺陷，在受载破裂过程中会产生大量的声发射信号。
A nonlinear and continuous strength degradation model is presented from the view point that fatigue damage process is the process during which material static strength degrades constantly.
从疲劳过程本质上是材料静强度不断退化的过程的观点出发，建立了一个非线性的、连续的强度退化模型。
This paper expatiates upon the principle and application of Acoustic Emission (AE), and it is known that AE technique is applicable to HTPB composite solid propellant dynamic damage process.
阐述了声发射(AE)原理及应用，指出AE技术适用于研究HTPB复合固体推进剂动态损伤过程。
It is shown that the proposed ductile fracture model can accurately and effectively predict the whole damage process of ductile metals including crack initiation, propagation and final fracture.
结果表明，该模型可很好地预测延性金属材料自裂纹萌生、扩展直至完全断裂的全过程。
By comparing the change of acoustic emission of rock materials under loading and unloading conditions, acoustic emission phenomenon has been discussed during the damage process of rock materials.
通过对加、卸荷应力状态下岩石类材料声发射变化的比较，探讨岩石类材料破坏过程中的声发射现象。
Repairing the damage caused by this bubble will be a long and difficult process.
修复这场泡沫造成的破坏将是一个长期而艰巨的过程。
This process protects our DNA from the damage that can be imparted by UV rays.
这样的一个过程可以保护我们的DNA免遭紫外线所带来的伤害。
This process protects our DNA from the damage that can be imparted by UV rays.
这样的一个过程可以保护我们的DNA免遭紫外线所带来的伤害。
应用推荐